1. Product Overview
The Jenny40 Mechanical Keyboard Kit is a highly customizable, tri-mode (wired, 2.4G wireless, Bluetooth) 40% layout keyboard designed for enthusiasts and gamers. It features a hot-swap PCB, a 3D printed PLA case, and supports both Gasket and Top mount structures for a personalized typing experience. Its compact and portable design makes it ideal for on-the-go use.
2. Package Contents
- 1x Jenny40 Mechanical Keyboard Kit (case, PCB, mounting plate, etc.)
- 1x User Manual
- (Note: Keycaps and switches are NOT included and must be purchased separately.)
3. Setup and Assembly
The Jenny40 is a kit that requires self-assembly. Please proceed with caution if you do not have prior assembly experience.
3.1. Structure Assembly (Gasket & Top Mount)
The keyboard supports both Gasket and Top mount structures. You can switch between these structures by adjusting the screws. The PCB gasket positioning plate is designed for flexible assembly.
3.2. PCB and Internal Components
The kit includes a 1.2mm black core single key slotted PCB with red ink alignment, an FR4 single key slotted countersunk gold locator plate, an imported Japanese inoue poron sound pack, and an 8x foam hair shaft under pad. These components are designed to provide a high-quality sound profile.
3.3. Switch and Keycap Installation
The PCB is hot-swappable, allowing for easy installation and removal of compatible 3-pin or 5-pin mechanical switches without soldering. Simply align the switch pins with the sockets on the PCB and press firmly until they click into place. Once switches are installed, attach your desired keycaps.
3.4. Battery Installation
The kit comes standard with a 2000mAh battery. An optional 4000mAh battery can be purchased for extended use. Connect the battery to the designated port on the PCB during assembly.
4. Operating Instructions
4.1. Connectivity Modes
The Jenny40 supports three connection modes:
- Type-C Wired: Connect the keyboard directly to your computer using a Type-C cable.
- 2.4G Wireless: Use the provided 2.4G USB receiver for a stable, low-latency wireless connection.
- Bluetooth: Pair the keyboard with your device via Bluetooth for wireless convenience.
4.2. System Compatibility
In wired mode, the keyboard is compatible with Windows 7/8/10 and macOS 10.14.6 or above.
4.3. Key Remapping (VIA/VIAL Software)
The Jenny40 supports key remapping using VIA/VIAL software for advanced customization.
- For Wireless Mode Key Changes: Please unplug the Type-C cable before making changes.
- For Wired Mode Key Changes: Please unplug the 2.4G receiver before making changes.
Compatibility issues between these modes are being optimized, and firmware updates will be provided.
5. Maintenance
- Cleaning: Use a soft, dry cloth to clean the keyboard case. For stubborn dirt, a slightly damp cloth can be used, but ensure no moisture enters the internal components.
- Switch Replacement: Due to the hot-swap feature, switches can be easily replaced. Use a switch puller to gently remove switches and insert new ones.
- Storage: Store the keyboard in a cool, dry place away from direct sunlight and extreme temperatures to preserve the PLA material.
6. Troubleshooting
6.1. Key Remapping Issues
If you encounter issues when remapping keys using VIA/VIAL:
- Ensure you have unplugged the Type-C cable when remapping in wireless mode.
- Ensure you have unplugged the 2.4G receiver when remapping in wired mode.
- Check for available firmware updates for improved compatibility.
6.2. Connectivity Problems
- Wired: Ensure the Type-C cable is securely connected to both the keyboard and your device.
- 2.4G Wireless: Ensure the 2.4G receiver is plugged into a USB port and the keyboard is in 2.4G mode. Check battery level.
- Bluetooth: Ensure Bluetooth is enabled on your device and the keyboard is in pairing mode. Check battery level.
7. Specifications
| Feature | Detail |
|---|---|
| Product Name | Jenny40 Mechanical Keyboard Kit |
| Layout | 40% (40 keys) |
| Connectivity | Tri-mode: Type-C Wired, 2.4G Wireless, Bluetooth |
| Hot-Swap | Yes |
| Case Material | PLA (3D Printed) |
| Structure Support | Gasket & Top Mount (Dual Structure) |
| PCB | 1.2mm black core, single key slotted, red ink alignment |
| Locator Plate | FR4 single key slotted, countersunk gold |
| Sound Pack | Imported Japanese inoue poron, 8x foam hair shaft under pad |
| Battery | Standard 2000mAh (upgradeable to 4000mAh) |
| Dimensions (W x D x H) | 247mm x 100mm x 19.56-37mm |
| Weight | Approx. 320g (kit), Approx. 420g (total) |
| Input Angle | 7 degrees |
| Supported OS (Wired) | Windows 7/8/10, macOS 10.14.6 or above |
| Backlight Type | No backlight |
8. User Tips
- Assembly Caution: This keyboard is a kit and requires self-assembly. If you lack experience with keyboard assembly, please proceed with extra care or seek assistance.
- Customization: The bottom nameplate supports customized patterns via UV printing, allowing for further personalization.
- Portability: The compact size and tri-mode connectivity make the Jenny40 an excellent portable solution for office work or travel.
- Sound Profile: The included sound pack components are designed to enhance the acoustic experience of your keyboard. Experiment with different switches to find your preferred sound.
9. Warranty and Support
For any inquiries, technical support, or if you require other Wireless Keyboard Set models not currently displayed, please contact the seller directly. Keep your purchase records for any potential support needs.