QYT CB-58

Contents

QYT CB-58 Handheld CB Radio User Manual

Model: CB-58 | Brand: QYT

1. Introduction

Thank you for choosing the QYT CB-58 Handheld CB Radio. This device is a multi-norm 12V CB 27MHz AM/FM radio designed for citizen band communication over long ranges. This manual provides essential information for safe and efficient operation of your new radio. Please read it thoroughly before use.

2. Package Contents

Verify that all items listed below are present in your package:

  • 1 × CB-58 CB Radio Body
  • 1 × 4100mAh 12V Li-ON Battery Pack
  • 1 × BNC Antenna
  • 1 × Desktop Charger
  • 1 × AC Adapter
  • 1 × Belt Clip
  • 1 × Hand Strap
  • 1 × English User Manual
All components included in the QYT CB-58 package
Figure 2.1: QYT CB-58 Package Contents

3. Product Overview

The QYT CB-58 is a robust handheld CB radio featuring a clear display and intuitive controls. It supports both AM and FM modulation modes and offers various functions for enhanced communication.

Front view of the QYT CB-58 Handheld CB Radio
Figure 3.1: Front View of QYT CB-58
Side view of the QYT CB-58 Handheld CB Radio showing ports
Figure 3.2: Side View with Ports
Detailed view of QYT CB-58 radio ports, battery, and antenna connection
Figure 3.3: Detailed Views of Radio Components

4. Setup

Follow these steps to prepare your QYT CB-58 for operation:

  1. Install Battery: Align the 4100mAh Li-ON battery pack with the battery compartment on the back of the radio and slide it into place until it clicks securely.
  2. Attach Antenna: Screw the BNC antenna clockwise onto the antenna connector at the top of the radio until it is finger-tight.
  3. Attach Belt Clip: Slide the belt clip onto the designated slot on the back of the radio.
  4. Charge Battery: Connect the AC adapter to the desktop charger, then place the radio (with battery installed) into the desktop charger. Ensure the charging indicator lights up. Charging typically takes 12-16 hours.
  5. Power On/Off: Rotate the top-right knob clockwise to power on the radio. Rotate counter-clockwise to power off.
  6. Select CB Band (Country Region):
    1. Press and hold the "FUN" button to power on the radio.
    2. Rotate the FM knob to select the desired country CB band (e.g., EU Band, UK Band, PL Band, I2 Band, DE Band, IN Band, U Band).
    3. Press the "OK" button to confirm your selection.
    Instructions for selecting the CB band for your country
    Figure 4.1: CB Band Selection

Video 4.1: Unboxing and Basic Setup Demonstration

5. Operating Instructions

Familiarize yourself with the radio's functions for effective communication.

5.1. Channel and Volume Control

  • Channel Selection: Use the channel selector knob (top-left) to change communication channels.
  • Volume Adjustment: Use the volume knob (top-right) to adjust the audio output level.

5.2. Modulation Mode (AM/FM)

Press the AM/FM button to switch between Amplitude Modulation (AM) and Frequency Modulation (FM) modes. The selected mode will be displayed on the screen.

Display showing AM/FM modulation modes
Figure 5.1: AM/FM Mode Display

5.3. Squelch (SQL) and Automatic Gain Control (AGC)

The Squelch function mutes the receiver output in the absence of a sufficiently strong signal, eliminating background noise. AGC automatically adjusts the receiver gain to maintain a constant audio output level.

Radio display showing Squelch level adjustment
Figure 5.2: Squelch Feature
Radio display showing Automatic Gain Control (AGC) in action
Figure 5.3: Automatic Gain Control (AGC)

5.4. Scan Function (SCN)

Press the SCN button to activate the scan function. The radio will automatically scan through channels to find active transmissions. You can set the scan duration.

Radio display showing the Scan function activated
Figure 5.4: Scan Function

5.5. Emergency Channels (EMG) and Memory Channels (MEM)

  • EMG: Press the EMG button to quickly access pre-programmed emergency channels.
  • MEM: Use the MEM button to access and manage additional memory channels.

5.6. Noise Blanker (NB) / RF Gain (RFG)

  • NB (Noise Blanker): Helps reduce pulse-type noise interference.
  • RFG (RF Gain): Adjusts the sensitivity of the receiver to strong signals.

5.7. Roger Beep (RB)

The Roger Beep function transmits a short tone at the end of your transmission, signaling to other users that you have finished speaking.

5.8. High-frequency Integrated Control Speaker (HIC)

The HIC feature enhances audio clarity for better reception.

Radio display highlighting the HIC (High-frequency Integrated Control Speaker) feature
Figure 5.5: HIC Feature

5.9. Flashlight

The radio includes a high-illumination flashlight for convenience in low-light conditions. Activate it using the dedicated button on the side.

QYT CB-58 radio with its high-illumination flashlight activated
Figure 5.6: High-illumination Flashlight

5.10. PC Programmable

The QYT CB-58 is PC programmable, allowing for advanced customization of channels and settings using dedicated software.

Screenshot of the PC programming software for the QYT CB-58
Figure 5.7: PC Programming Interface

6. Maintenance

6.1. Battery Care

  • Always use the provided charger and AC adapter.
  • Do not expose the battery to extreme temperatures.
  • If the radio will not be used for an extended period, remove the battery and store it in a cool, dry place.

6.2. Cleaning

  • Wipe the radio's exterior with a soft, damp cloth.
  • Do not use harsh chemicals or abrasive cleaners.

6.3. Storage

Store the radio in a dry, dust-free environment away from direct sunlight and extreme temperatures.

7. Troubleshooting

  • Radio not powering on: Ensure the battery is correctly installed and fully charged. Check the power knob.
  • No reception/transmission: Verify the antenna is securely attached. Check the selected channel and modulation mode (AM/FM). Ensure the squelch level is not set too high.
  • Poor audio quality: Adjust the volume and squelch levels. Check for interference from other electronic devices.
  • Charging issues: Ensure the AC adapter is the correct one for the charger and radio. Verify connections are secure.

8. Specifications

QYT CB-58 Technical Specifications
CategoryParameterValue
GeneralModulation ModeAM/FM
Frequency Range26.965-27.405MHz
Frequency Tolerance±5.0ppm
Input Voltage12.6V
Dimensions165(W)*67(D)*44(H) mm
WeightApprox. 444.5g
Frequency ControlPLL Synthesizer
Operating Temperature Range-20°C to +55°C
Current DrainTransmit1.5A Max
Receive (Squelched)0.11A
Receive (VOL Max)0.8A
AntennaAntenna ConnectorBNC
TransmitterPower Output4 Watts FM/AM
Transmission InterferenceInferior to 4nW (-54dBm)
Frequency Response300-3000Hz
Modulated Signal DistortionInferior to 5%
Output Impedance50 Ohms
ReceiverSensitivityLess than 1uV for 10dB (S+N)/N
Image Rejection70dB
Adjacent Channel Rejection60dB
IF Frequencies (1st)10.695MHz
IF Frequencies (2nd)455KHz
Automatic Gain Control (AGC)Less than 10dB change in audio output for inputs from 10 to 50000uV
SquelchLess than 1uV
Audio Output Power3 watts into 8 ohms
BatteryCapacity4100mAh
Voltage12V
Working Time10-15 hours (Approx.)
Standby Time2-3 days (Approx.)
Charging Time12-16 hours (Approx.)
Diagram showing the dimensions of the QYT CB-58 radio
Figure 8.1: Product Dimensions
Image of the AC adapter with input and output specifications
Figure 8.2: AC Adapter Specifications

9. User Tips

  • The QYT CB-58 has a good receiver, but its noise canceling might be less effective compared to some other models.
  • Always ensure you receive the correct AC power adapter for charging to avoid compatibility issues.
  • CB radios operate on standard frequencies, allowing communication with other CB radios regardless of brand, as long as they are on the same band and channel.
  • Note that this model supports AM/FM modulation and does not include SSB (Single Sideband) functionality.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the contact information provided by your retailer or visit the official QYT website. Keep your purchase receipt as proof of purchase.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.