1. Introduction
Thank you for choosing the 12GO 97011 M26 Pershing Heavy Tank Model Building Blocks. This set allows you to construct a detailed replica of the M26 Pershing tank with over 1703 pieces. This manual provides essential information for assembly, operation, maintenance, and safety to ensure a rewarding building experience.
Package Contents:
- Building block set (1703+ pieces) x 1
- Paper instruction manual x 1
Note: The product is packaged in an original color box.
2. Safety Information
Please read and understand all safety warnings before assembly and use of this product.
General Warnings:
- WARNING: Choking Hazard. Small parts. Not suitable for children under 36 months. Parental supervision is mandatory at all times. Keep parts stored safely out of reach of minors under 14 years old.
- Recommended Age: This product is recommended for ages 14 years and above.
- California Proposition 65 Warning: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
- This product is not edible.
Handling and Environmental Precautions:
- Do not expose the assembled model or individual parts to wet environments, ambient dew corridors, or direct acid fumes to mitigate material breakdown.
- Dispose of transparent outer plastic polybags instantly post-unboxing to avert unexpected infant suffocation hazards.
3. Setup and Assembly
Follow the included paper manual for detailed step-by-step assembly instructions. The set contains 1703+ pieces, requiring careful attention during construction.
Assembly Guidelines:
- Carefully check the line graphics inside the digital or paper manual paths for correct part placement.
- Do not force high-interference structural pins or blocks together. If parts do not fit easily, re-check the instructions to ensure correct orientation and selection. Forcing parts can damage the material integrity.
- Organize your building blocks by type and color before starting assembly to streamline the process.
4. Operating the Model
Once assembled, your M26 Pershing tank model features several interactive elements for realistic play and display.
Key Features:
- 360-Degree Rotating Turret: The tank's turret can be manually rotated a full 360 degrees, allowing for dynamic posing and aiming.
- Adjustable Gun Barrel: The main gun barrel can be moved up and down, simulating aiming and targeting.
5. Maintenance
Proper care will ensure the longevity and appearance of your building block model.
Cleaning:
- To clean the model, gently wipe with a dry, soft cloth.
- For stubborn dirt, a slightly damp cloth can be used, followed by immediate drying. Avoid harsh chemicals or abrasive materials.
Storage:
- Store the model in a cool, dry place away from direct sunlight to prevent discoloration or material degradation.
- Keep the model away from excessive heat or cold, as extreme temperatures can affect the plastic material.
6. Troubleshooting
If you encounter any issues during assembly or with the product, please refer to the following common solutions.
Common Issues and Solutions:
- Missing or Damaged Parts: If you find any parts missing or damaged upon opening the package, please contact customer service immediately for assistance.
- Difficulty Assembling Parts: If parts do not fit together easily, do not force them. Re-examine the instruction manual to ensure you are using the correct parts and orienting them properly. Sometimes, a slight adjustment in angle or pressure can help, but excessive force should be avoided.
7. Specifications
| Feature | Detail |
|---|---|
| Product Model | 97011 |
| Product Name | M26 Pershing Heavy Tank Model Building Blocks |
| Brand Name | wishiot |
| Part Count | 1703+ pieces |
| Main Material | ABS Plastic (Environment friendly material) |
| Recommended Age | 14+ years |
| Gender | Unisex |
| Origin | Mainland China |
| Package Dimensions (L x W x H) | 33 cm x 24 cm x 10 cm |
| Package Weight | 2.015 kg |
8. Warranty and Support
For technical assistance, missing parts, or any product-related inquiries, please use the following contact methods.
Manufacturer Information:
- Manufacturer: Shenzhen Maker Dream Technology Co., Ltd.
- Address: 3rd Floor, Building 81, Hekan Industrial Zone, No. 41 Wuhe South Road, Bantian, Longgang District, Shenzhen, Guangdong, 518000, China
- Phone: +86-13534021879
- Email: 3929935415@qq.com
EU Authorized Representative:
- Representative: eVatmaster Consulting GmbH
- Address: Bettinastr. 30, 60325 Frankfurt am Main, Germany
- Phone: 004-96995179070
- Email: contact@evatmaster.com
Customer Support Channels:
- Platform Messaging: Contact our team directly through your active AliExpress Order Chat Console.
- WhatsApp Engineering Support: +86 13534021879
- Email Support: 3929935415@qq.com
Compliance:
This product complies with the General Product Safety Regulation (EU) 2023/988 (GPSR), European Toy Safety Directive 2009/48/EC, Electromagnetic Compatibility (EMC) Directive 2014/30/EU, and RoHS hazardous substance limitations. Please dispose of obsolete hardware variants responsibly, not in typical domestic trash bins, in accordance with WEEE directives.