CARABC Wireless CarPlay Android Auto Module for Mercedes NTG4.5/4.7/5.0 Systems

Contents

CARABC Wireless CarPlay Android Auto Module User Manual

Model: Wireless CarPlay Android Auto Module for Mercedes-Benz NTG4.5, NTG4.7, and NTG5.0 Systems

Brand: CARABC

1. Introduction

This CARABC Wireless CarPlay Android Auto module adds full CarPlay and Android Auto functionality to your existing Mercedes-Benz NTG4.5, NTG4.7, or NTG5.0 system. It retains all original car features, including button and steering wheel controls. The system supports both iOS and Android mobile phone functions, allowing seamless integration of navigation, music, phone calls, and messaging via Siri or Google Assistant.

Key features include:

  • Wireless Apple CarPlay
  • Wireless Android Auto
  • Support for aftermarket rearview cameras, DVRs, and 360-degree camera input
  • Plug-and-play installation using original car wires, requiring no cutting or interruption
  • Support for Airplay and Android mirroring
CARABC Wireless CarPlay Android Auto Module with icons for CarPlay, Android Auto, Phone, and Navigation

Product overview showing the module and supported features.

2. Setup and Installation

2.1 Pre-installation Notes

  • CAUTION: Never turn on the ignition with the factory radio removed.
  • For C and GLC model cars, after installing the modules, reinstall the button panel and perform testing. Failure to do so may cause the screen to continuously reboot.

2.2 Dip Switch Settings

Before connecting the CarPlay module, adjust the DIP switches according to your car model and screen size. CAUTION: Ensure CarPlay POWER is disconnected when adjusting the dip switches. Once set, then connect CarPlay POWER.

Dip switch settings table for NTG4.5/4.7 systems

Dip switch configuration for various Mercedes-Benz models and screen sizes.

1 2 3 4 Car Model Screen Size
OFF OFF OFF ON C/GLC/V/S
OFF ON A/B/E/CLA/CLS/GLA/GLE/GLS
OFF ON 800*480 (7.4"/8.4")
ON OFF 960*540 (8.4")
ON ON 1440*540 (12.3")

2.3 Wiring and Connections

Follow the diagram carefully for proper installation. Ensure all connections are secure.

NTG4.5 Installation Instruction wiring diagram

Detailed wiring diagram for NTG4.5 systems.

General installation diagram with numbered connections

General installation diagram with numbered connection points.

  1. Connect the plug of the Original Car Power Cable.
  2. Connect the Original Car Power.
  3. Connect the WiFi Antenna. (Do not attach antennas to hardware surfaces.)
  4. Connect the Original Car Host Video Port.
  5. Connect the Original Car Video Cable.
  6. Connect the USB port.
  7. Connect the Aftermarket Rear Camera Port.
  8. Connect the Aftermarket Front Camera Port.
  9. Connect the Reversing Detection Line (purple line).
  10. Connect the Aftermarket CAM power supply (yellow line).

Important Notes for Wiring:

  • Connect to the original vehicle LVDS and the original car's host terminal.
  • When inserting to the host, check if it is stuck properly.
  • If there is an optical fiber cable on the original power cable, remove it and transfer it to the power cable of the CarPlay box.
  • Before entering the Retrofit system, use your phone to connect to the original car's Bluetooth and select calls and media. Then, select the original car audio in the Bluetooth stereo interface.

2.4 LVDS Cable Verification

To identify the correct LVDS cable: When the screen is on, unplugging the correct LVDS cable will cause the screen to turn black.

3. Operating Instructions

3.1 Wireless CarPlay Connection

  1. On your phone, open Wi-Fi and Bluetooth.
  2. Click "Discover and connect device".
  3. Select the Bluetooth device name starting with "CX_BT....." and pair with CarPlay.
Wireless CarPlay connection screen on car display

CarPlay interface on the car's display.

3.2 Wireless Android Auto Connection

  1. On your phone, open Wi-Fi and Bluetooth.
  2. Click the Bluetooth device name starting with "CX-BTXXXX" and pair the device.
Android Auto user interface examples

Examples of Android Auto user interfaces.

3.3 Car Settings (Module Interface)

  • Audio Settings: If your original car has Bluetooth phone functionality, you do not need to add an additional microphone. Ensure the module's audio settings are configured to use the original car's Bluetooth audio. For original multimedia selection, use AUX.
  • Reversing Camera Settings: The module supports aftermarket reversing cameras. Ensure the camera power is connected to "cam-power" and the video input (rear-CVBS/AHD720P) is connected to the camera input.

3.4 Control Methods

  • Steering Wheel Buttons:
    1. Long press: Switch systems.
    2. Short press: Connect/Hang up phone.
    3. Short press: Increase or decrease volume.
    4. Press: Restart.
  • Central Control Knob:
    1. Long press: Switch systems.
    2. Move knob: Move cursor.
    3. Short press: Confirm; move left/right to cut to the next song.
    4. Long press: Confirm active voice.
    5. Right move (approx. 15s): Reduce.
  • Voice Control (Siri/Google Assistant): Use voice commands for navigation, calls, music, and more.
Voice control feature showing Siri commands

Example of using voice commands with the module.

CarPlay features including steering wheel control, equalizer, navigation, and music

Module features including steering wheel control, equalizer, and navigation.

4. Maintenance

The CARABC module supports free software updates to ensure optimal performance and compatibility with the latest mobile operating systems and applications. Check the manufacturer's website or contact support for information on available updates.

5. Troubleshooting

  • Screen not displaying normally: Check the LVDS cable connection and ensure the DIP switches are set correctly according to your car model and screen size.
  • Sound problems: Verify that the multimedia and installation system settings of the original car are correct. Ensure the module's audio output is routed through the original car's Bluetooth system.
  • Mainframe pilot lamp not working: Check the power cable connection and the fuse for any issues.
  • Module not powering on after dip switch adjustment: Ensure CarPlay POWER was disconnected before adjusting the dip switches. Reconnect power only after the dip switches are correctly set.

6. Specifications

Parameter Value
Operating Voltage 9-16V
Operating Temperature -30 ~ +75°C
Stored Temperature -30 ~ +85°C
Environment Humidity ≤98% (at 45°C), 65±5% (rated)
Power Consumption 500mA (rated), 3A (Max)
Shutdown Current 3 mA (Clock is on)
Quiescent Current Less than 3 mA
Charging Current ≤ 2A (Host activates circuit protection if USB charging current > 1A, controlling current below 1.5A to prevent burning)

6.1 Package Dimensions

  • Length: 26 cm
  • Width: 21 cm
  • Height: 7 cm
  • Weight: 0.856 kg
Product dimensions and included cables

Module dimensions and included accessories: power cable, Wi-Fi antenna, LVDS cable.

7. User Tips

  • Compatibility Check: Always verify your Mercedes-Benz model and NTG system version (e.g., NTG4.5, NTG5.0) before installation. Refer to the provided dip switch settings table to ensure compatibility with your specific car model and screen size. For example, users have inquired about compatibility with a 2016 C450 AMG and a 2016 Mercedes-Benz GLE 250d (WDC1660041A667252).
  • Sound Output for NTG5.0: The NTG5.0 device does not support screen mirroring (Apple, Android). For sound output, it must be routed through the original car's Bluetooth system.
  • LVDS Cable Identification: If you are unsure which cable is the correct LVDS cable, a quick test is to unplug it while the screen is on. The correct LVDS cable will cause the screen to turn black when disconnected.

8. Warranty and Support

CARABC provides comprehensive after-sales support for this module:

  • Warranty: The product comes with a one-year guarantee.
  • After-Sales Service: 24+ hours after-sales service is available.
  • Support: Exclusive support service is provided.
  • Updates: Free software updates are offered.
Aftersales service details: 24+ hours service, 1 year guarantee, exclusive support, free updates

Overview of CARABC after-sales services.

For a more detailed guide, please refer to the official user manual PDF: View User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.