User Manual

1. Introduction

Thank you for purchasing the SK-007 Multifunction Wireless Vacuum Cleaner. This portable and powerful cleaning machine is designed for both home and car use, offering strong suction and versatile cleaning capabilities. Please read this manual carefully before use to ensure proper operation and maintenance.

Figure 1.1: SK-007 Wireless Vacuum Cleaner highlighting key features.

2. Product Specifications

Note: Dimensions are measured manually and may have slight errors.

3. Package Contents

Please check the package for the following items:

• Host (Main Unit)
• Extended Tube
• Floor Brush
• Flat Mouth Tip
• Crevice Brush Head
• Brush Brush Head
• Filter Element (pre-installed or separate)
• Charging Cable (Type-C)
• User Manual

Figure 3.1: Accessory list. 1. Extended tube, 2. Host, 3. Crevice brush head, 4. Flat mouth tip, 5. Floor brush, 6. Filter element, 7. Brush brush head.

4. Setup and Assembly

1. Unpack: Carefully remove all components from the packaging.
2. Assemble Main Unit:
   • Attach the desired cleaning head (Floor Brush, Flat Mouth Tip, Crevice Brush Head, or Brush Brush Head) directly to the Host for handheld use.
   • For extended reach, connect the Extended Tube to the Host, then attach the desired cleaning head to the other end of the Extended Tube. Ensure all connections are secure.
3. Charging:
   • Before first use, fully charge the vacuum cleaner.
   • Connect the Type-C charging cable to the charging port on the Host.
   • Connect the other end of the cable to a compatible power source (e.g., wall adapter, car charger, power bank, computer USB port).
   • The charging indicator will show the charging status. A full charge takes approximately 2 hours.
   

   Figure 4.1: Type-C charging port and compatible power sources.

   The vacuum features 5-fold battery protection: Overcharge, Overdischarge, Overcurrent, Temperature, and Short-circuit protection.

   

   Figure 4.2: Battery protection features.

5. Operating Instructions

1. Power On/Off: Press the one-touch switch button on the Host to turn the vacuum cleaner on or off.
2. Adjust Suction Power: The vacuum offers flexible gear switching. Press the power button again to toggle between "Standard file" (normal suction for energy saving) and "Strong suction gear" (maximum suction for deep cleaning).
   

   Figure 5.1: Switching between Standard and Strong suction modes.

3. Using Attachments:
   • Floor Brush: Ideal for general cleaning of carpets and hard floors. Its 270° rotating head allows for flexible maneuvering around obstacles and into corners.
     

     Figure 5.2: The floor brush offers 270° flexibility for comprehensive cleaning.

   • Flat Mouth Tip: Use for cleaning dust on flat surfaces such as sofas, beds, and seats.
     

     Figure 5.3: Flat mouth tip for surface dust removal.
   • Crevice Brush Head: Designed to penetrate deep into corner seams, sofa gaps, and other narrow crevices to easily remove dust.
     

     Figure 5.4: Crevice brush head for hard-to-reach areas.

   • Brush Brush Head: Effective for absorbing dust from surfaces like curtains, keyboards, stairs, and other furniture.
     

     Figure 5.5: Brush brush head for delicate surfaces and stairs.
4. Maneuverability: The lightweight design and flexible brush head allow for easy operation. The floor brush can rotate 180° left and right, and 90° up and down, enabling cleaning in tight corners and under low furniture without dead spots.
   

   Figure 5.6: Flexible rotation for comprehensive cleaning.

6. Maintenance

Regular maintenance ensures optimal performance and extends the life of your vacuum cleaner.

1. Emptying the Dust Cup:
   • When the dust cup is full, or suction power decreases, detach the dust cup from the Host.
   • Empty the contents into a trash bin.
2. Cleaning Filters:
   • The vacuum cleaner features a detachable and washable filtration assembly, including a metal strainer, HEPA filter element, and microporous filter.
   • Remove the filter components from the dust cup.
   • Rinse the metal strainer and other washable filter parts under running water until clean. Tap the HEPA filter to remove dust; do not wash it unless explicitly stated by the manufacturer.
   • Allow all washed parts to air dry completely before reassembling. Ensure they are thoroughly dry to prevent mold or damage to the motor.
   • Reassemble the filters and dust cup, ensuring they are securely in place.
   

   Figure 6.1: Components of the multiple filtration system, including washable metal strainer.
3. Cleaning Brush Heads:
   • Periodically check brush heads for tangled hair or debris.
   • Remove any obstructions to maintain effective cleaning.
4. Storage: Store the vacuum cleaner in a cool, dry place away from direct sunlight and moisture.

7. Troubleshooting

8. User Tips

• For optimal battery life, fully charge the vacuum before each significant cleaning session.
• Regularly empty the dust cup and clean the filters to maintain strong suction and prevent motor strain.
• Utilize the appropriate attachment for the cleaning task to achieve the best results and avoid damage to surfaces.
• The lightweight design makes it easy to clean high areas or use as a handheld for quick spot cleaning.
• Take advantage of the flexible brush head rotation to reach under furniture and into tight corners effectively.

9. Warranty and Support

This product is covered by a manufacturer's warranty. For specific warranty details, claims, or technical support, please contact the seller or the point of purchase. Keep your proof of purchase for any warranty-related inquiries.

For further assistance, please refer to the contact information provided by your retailer.