1. Introduction
The FEELWORLD FW1018SPV1 is a high-quality 10.1-inch professional HD field monitor designed for precise video monitoring in various production environments. Featuring an IPS panel with 1920x1200 resolution, it offers wide viewing angles and excellent color reproduction. This monitor supports multiple input and output formats, including 3G-SDI and HDMI, and incorporates advanced features like 3D LUTs, waveform monitoring, peaking, and a 3-color Tally light to enhance your workflow.
Figure 1: Front and Rear View of the FW1018SPV1 Monitor
2. Package Contents
Please check the package carefully to ensure all items are present and in good condition:
- FEELWORLD FW1018SPV1 10.1 Inch Monitor
- Mini HDMI Cable
- Sun Shade
- Hot Shoe Mount
- Tally Kit
- F970 Battery Plate
- Bracket
Figure 2: Standard Package Contents
3. Setup
3.1 Mounting the Monitor
The FW1018SPV1 monitor can be mounted using its thread sockets located on the left, right, and bottom sides. The included hot shoe mount can be used to attach the monitor to a camera or rig.
3.2 Powering the Monitor
The monitor offers flexible power options:
- DC 7-24V Input: Connect the included power adapter (if applicable) to the DC 12V IN port on the rear panel.
- 4-pin XLR Connector: For professional power solutions.
- Battery Plate: The monitor supports F970 battery plates (battery not included, purchase separately). Ensure the battery plate is securely attached to the rear of the monitor.
Figure 3: Multiple Power Supply Options
3.3 Connecting Video and Audio Sources
The monitor provides a variety of input and output ports:
- Inputs: 3G-SDI (x1), HDMI (x1), YPbPr (x1), Video (x1), Audio (L/R) (x2), Tally (DB-9).
- Outputs: 3G-SDI (x1), HDMI (x1), YPbPr (x1), Video (x1).
- Audio Out: Stereo Headphone, Internal Speaker.
Connect your camera or video source to the appropriate input port (HDMI, SDI, YPbPr, or Video). For audio monitoring, connect headphones to the stereo headphone jack or use the built-in speaker.
Figure 4: Input and Output Ports
3.4 Attaching the Sun Shade
For outdoor use or bright environments, attach the portable sun shade to the monitor to improve visibility and reduce glare.
Figure 5: Monitor with Portable Sunshade
4. Operating Instructions
4.1 Power On/Off
Locate the ON/OFF switch on the rear panel of the monitor. Flip the switch to 'ON' to power on the device. Flip to 'OFF' to power it down.
4.2 Function Buttons and Controls
The front panel features several function buttons and control knobs for easy operation:
- F1-F6 Buttons: Customizable function buttons for quick access to frequently used features.
- VIDEO, YPbPr, HDMI, SDI Buttons: Select the desired input source.
- MENU Button: Access the main menu for settings adjustments.
- ESC Button: Exit menus or cancel selections.
- FOCUS Knob: Adjust focus assist features.
- Control Knobs: Navigate menus and adjust parameters.
Figure 6: Function Buttons for Easy Operation
4.3 Display Features
The FW1018SPV1 utilizes an IPS FHD panel with a resolution of 1920x1200 pixels, providing a wide 170°/170° viewing angle and a brightness of 320nit. This ensures accurate and consistent images from various perspectives.
Figure 7: Professional HD Field Monitor Display
4.4 Loading Custom 3D LUTs
The monitor supports loading custom 3D LUTs (Look Up Tables) to assist with color calibration and workflow optimization. Up to 32 custom LUTs can be imported.
- Store your .cube LUT files in the root directory of a USB flash drive. A single file must not exceed 7.9MB and supports LUT_3D_SIZE of 16, 17, 32, 33, 64, 65.
- Remove the battery plate from the rear of the monitor to access the mini USB interface.
- Connect the USB flash drive to the monitor using a mini USB to USB cable (not included).
- Navigate to the LUT menu in the monitor's settings and select the option to import LUT files.
Figure 8: 3D LUT Interface
4.5 Waveform Monitoring
Utilize the accurate waveform monitoring feature to analyze video signals, ensuring proper exposure and color balance. Access this feature through the menu or a customizable function button.
Figure 9: Waveform Monitoring Display
4.6 Tally Light Function
The monitor is equipped with a 3-color Tally light (Red, Green, Yellow) on the front panel. This light is controlled via the DB-9 port on the rear panel, indicating camera status (e.g., recording, standby).
Figure 10: 3-Color Tally Light
5. Maintenance
- Cleaning: Use a soft, dry cloth to clean the monitor's exterior. For the screen, use a specialized screen cleaning solution and a microfiber cloth. Avoid harsh chemicals or abrasive materials.
- Storage: When not in use, store the monitor in a cool, dry place, away from direct sunlight and extreme temperatures. Use the original packaging or a protective case to prevent damage.
- Battery Care: If using external batteries, follow the manufacturer's guidelines for charging and storage to prolong battery life.
6. Troubleshooting
- No Power: Ensure the power switch is ON. Check all power connections (DC adapter or battery). Verify the power source is providing adequate voltage (DC 7-24V).
- No Video Signal: Confirm the correct input source is selected (HDMI, SDI, YPbPr, Video). Check all video cables for secure connections and ensure they are not damaged. Verify the output settings of your camera/source match the monitor's supported formats.
- Image Issues (Distorted/No Color): Check cable connections. Ensure the monitor's display settings (color temperature, contrast, brightness) are correctly configured. If using LUTs, ensure the correct LUT is applied or temporarily disable it to diagnose.
- Buttons Unresponsive: Power cycle the monitor. If the issue persists, contact support.
7. Specifications
| Feature | Specification |
|---|---|
| Display Size | 10.1" |
| Resolution | 1920x1200 pixels |
| Brightness | 320nit |
| Contrast | 800:1 |
| Viewing Angle | 170 degree |
| Aspect Ratio | 16:10 |
| Backlight | LED |
| Input | 3G-SDI, HDMI, YPbPr, Video, Audio(L/R), Tally |
| Output | 3G-SDI, HDMI, YPbPr, Video |
| Audio Out | Stereo Headphone, Speaker |
| HDMI Support Format | 4096*2160P(24Hz), 4K UHD 3840×2160p (30/29.97/25/24/23.98), 1080p (60/59.94/50/30/29.97/25/24/24sF/23.98/ 23.98sF), 1080i (60/59.94/50), 720p (60/59.94/50/30/29/25/24/23.98) |
| SDI Support Format | Up to 1080p 60Hz |
| YPbPr Format | 720p(60/50), 1080i(60/50) |
| Power Source | DC |
| Input Voltage | DC7-24V |
| Power Consumption | 17W |
| Power Connector | DC, 4-pin XLR |
| Unit Size | 258L x 192H x 39D mm |
| Unit Weight | 810g |
| Install Way | Thread Socket (left, right, bottom) |
| Supporting Language | Japanese, French, German, Spanish, Portuguese, Russian, English, Korean, Dutch, Simplified Chinese, Traditional Chinese Style |
| Certification | CE, FCC, RoHS |
| Origin | Mainland China |
8. User Tips
- LUT Management: Keep your frequently used 3D LUT files organized on a dedicated USB drive for quick access and import. Remember to remove the battery plate to access the USB port for LUT loading.
- Power Redundancy: For critical shoots, consider having both DC power and a charged F970 battery connected to ensure uninterrupted operation.
- Custom Function Buttons: Take advantage of the customizable F1-F6 buttons to assign your most-used features (e.g., peaking, false color, waveform) for faster adjustments during production.
9. Warranty and Support
FEELWORLD products typically come with a 1-year warranty, ensuring quality and stability. For technical support, service, or warranty claims, please contact FEELWORLD customer service through their official website or the retailer where the product was purchased. Please retain your proof of purchase for warranty validation.
