Plery R702

Contents

Plery 4G Outdoor Router User Manual

Models: R702, R733

1. Introduction

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your Plery 4G Outdoor Router (Models R702 and R733). These routers are designed to provide reliable internet connectivity in outdoor and remote environments using a 4G LTE cellular network.

Plery R702 4G Outdoor Router with IP66 waterproof rating and PoE/DC power
Plery R702 4G Outdoor Router: IP66 waterproof, PoE/DC power, 4G to WiFi, 4G to wired, Micro SIM.

1.1. Model Variants Overview

ModelKey HighlightBest For
R7334G Cat.6 (300Mbps down), Dual‑Band WiFi (2.4G+5.8G, 1200Mbps), WAN failover, Replaceable LTE antennasHigh‑speed remote office, live streaming, large file transfer, advanced users
R7024G Cat.4 (150Mbps down), WiFi6 (AX3000), IP66 waterproof, PoE/DC, Up to 16 devicesOutdoor surveillance, harsh weather, industrial IoT, plug‑and‑play simplicity

2. Safety Information

Please read and follow all safety instructions carefully to prevent injury or damage to the device.

  • Do not open the device casing unless instructed by qualified personnel.
  • Ensure proper ventilation to prevent overheating.
  • Use only the power adapter and cables provided or recommended by the manufacturer.
  • Protect the device from extreme temperatures, humidity, and direct sunlight.
  • For outdoor installation, ensure the device is securely mounted and all connections are properly sealed to prevent water ingress (especially for R733 if not IP66 rated).
  • Disconnect power before cleaning or performing any maintenance.

3. Package Contents

Verify that all items are present in your package:

Contents of the Plery 4G Outdoor Router package including router, network cable, ties, fasteners, power cable, PoE adapter, and user manual
Package contents for the Plery 4G Outdoor Router.
  • 1x Plery 4G Outdoor Router (R702 or R733)
  • 1x Network Cable
  • 1x Power Cable
  • 1x PoE Adapter (24V 0.5A for R702, 24V 1A for R733)
  • Ties / Fasteners
  • Installation Screws
  • User Manual
  • High Gain Antennas (2x for R702, 2x external LTE + 2x internal WiFi for R733)

Note: Due to different production batches, accessories may vary slightly. Please refer to the received object.

Video: Unboxing and package contents display for the Plery R702 4G Outdoor Router.

4. Product Overview

4.1. Physical Features (R702)

Back view of Plery R702 4G Outdoor Router showing SIM slot, LAN port, DC port, and Reset button
Back panel of the R702 router with ports and buttons.
  • SIM Slot: Insert your Nano SIM card here.
  • LAN Port: 1x RJ45 10M/100M LAN Ethernet Interface.
  • DC Port: For 12V 1A DC power input.
  • Reset Button: Used to restore factory settings.
  • Antennas: 2x 5dBi External LTE Antennas, 1x 5dBi Internal WiFi Antenna.
Side view of Plery R702 4G Outdoor Router showing LED indicators for power, 4G signal, and WiFi
LED indicators on the side of the R702 router.
  • LED Indicators: Power, 4G Signal Strength, WiFi Status.

4.2. Physical Features (R733)

  • SIM Slot: Nano SIM card slot.
  • Ethernet Ports: 1x Gigabit WAN/LAN + 1x Fast LAN.
  • Power Options: PoE 24V/1A + DC 12V/2A.
  • Antennas: 2x external LTE (detachable, upgradeable), 2x internal WiFi.

5. Setup Instructions

5.1. SIM Card Installation

  1. Open the back cover of the router.
  2. Locate the SIM slot.
  3. Insert a Nano SIM card into the slot until it clicks into place. Ensure the SIM card is correctly oriented.
  4. Close the back cover.
Diagram showing how to insert a Nano SIM card into the Plery 4G Outdoor Router
Insert a Nano SIM card into the router.

5.2. Antenna Installation

The router comes with external antennas. For optimal signal reception:

  1. Carefully screw the provided antennas onto the SMA connectors on the top of the router.
  2. Adjust the antennas for the best signal strength.
Diagram showing installation of extension antennas via SMA connectors on the Plery 4G Outdoor Router
Install extension antennas via SMA connectors.

Note: For R733, default 4G antennas are standard sensitivity. You can replace them with customized high-gain antennas via the SMA connectors for weak signal areas.

5.3. Power Connection

The router supports both Power over Ethernet (PoE) and DC power.

5.3.1. PoE Connection

Connect an Ethernet cable from the PoE adapter/switch to the LAN port of the router. This allows for power and data transmission over a single cable, up to 100 meters.

Diagram showing how to connect the Plery 4G Outdoor Router using a PoE adapter for network and power up to 100m away
Connecting the router using a PoE adapter for extended reach.

Note: R702 uses 24V 0.5A POE. R733 uses 24V 1A POE.

5.3.2. DC Power Connection

Connect the provided DC power adapter to the DC port on the router and then to a power outlet.

Note: R702 uses DC 12V 1A. R733 uses DC 12V 2A.

5.4. Mounting the Router

A mounting kit is included for Wall-Mounting and Pole-Mounting.

Images showing wall-mounting and pole-mounting options for the Plery 4G Outdoor Router
Mounting options: Wall-Mounting and Pole-Mounting.

For R702, the IP66 rating ensures protection against rain and dust when installed vertically.

6. Operating Instructions

6.1. Initial Power-Up and Connection

  1. After connecting the SIM card, antennas, and power, the router will power on automatically.
  2. Wait for the LED indicators to stabilize. The 4G signal LED should indicate a stable connection.
  3. Connect your device (computer, smartphone, IP camera) to the router via Wi-Fi or Ethernet cable.
    • Wi-Fi: Search for the router's Wi-Fi network (SSID) on your device and enter the default password (usually found on a sticker on the device or in the manual).
    • Ethernet: Connect an Ethernet cable from your device to the LAN port of the router.
Diagram showing multiple users connected to the Plery 4G Outdoor Router via WiFi
The router supports multiple connected devices simultaneously.

The R702 supports up to 16 users online at the same time, while the R733 supports 32+ devices.

6.2. Accessing the Web Interface

To configure advanced settings, access the router's web interface:

  1. Ensure your device is connected to the router's network.
  2. Open a web browser and enter the router's default IP address (e.g., 192.168.1.1 or 192.168.0.1). Refer to the device label or manual for the exact IP.
  3. Enter the default username and password (usually "admin" for both, or as specified on the device label).

6.3. Basic Configuration (Web Interface)

  • APN Settings: The router typically uses Auto-APN. If your SIM card requires manual APN settings, navigate to Network Settings > 4G/3G Features to configure.
  • Wi-Fi Settings: Change SSID, password, frequency, channel, and bandwidth under Wi-Fi settings.
  • TTL Setting: Adjust TTL settings if required by your mobile carrier.
  • 4G Band Setting: Select specific 4G bands if needed for better performance in your region.

Note: The R733 offers WAN Failover, allowing it to automatically switch to 4G if a wired broadband connection fails. This feature can be configured in the web interface.

Video: R702 Internet Tutorial - A visual guide to setting up internet access.

7. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the device. Do not use liquid or aerosol cleaners.
  • Firmware Upgrade: Periodically check the manufacturer's website (www.szcomfast.com) for firmware updates to improve performance and security. Follow the instructions provided with the firmware.
  • Restore Factory Settings: If the device is not functioning correctly or you forget the login credentials, you can restore it to factory settings using the reset button. Press and hold the reset button for about 5-10 seconds while the device is powered on.

7.1. Maintenance Regulations (General)

The following conditions are not covered by free maintenance:

  • Damage due to improper installation, usage, or storage not in accordance with the manual.
  • Damage occurring beyond the warranty period.
  • Unauthorized alteration, tearing up of the product bar code.
  • Unauthorized modification of settings files or inherent disassembly.
  • Damage caused by unexpected factors or human actions, such as improper input voltage, extreme temperatures, water damage, rust, or other serious issues.
  • Damage caused by non-product related issues (design, technology, manufacturing, quality).

8. Troubleshooting

No Internet Connection:
  • Check if the SIM card is correctly inserted and activated.
  • Verify the 4G signal strength indicators on the device.
  • Ensure the APN settings are correct for your carrier (usually auto-configured, but manual adjustment might be needed).
  • If you cannot obtain an IP address or receive data packets, double-check your network password in the router settings. If your network is fixed, you may need to manually set the IP address.
  • Reboot the router and your connected devices.
Slow Speed:
  • Check your 4G signal strength. Weak signal leads to slow speeds. Consider adjusting antenna direction or using high-gain antennas (especially for R733).
  • Ensure you are within the coverage area of your cellular provider.
  • Reduce the number of connected devices or bandwidth-intensive activities.
  • For R733, ensure Carrier Aggregation is active if supported by your carrier and SIM.
  • Some users reported lower speeds than expected; verify your SIM card performs better in other devices to rule out carrier issues.
Wi-Fi Connection Issues:
  • Ensure the Wi-Fi is enabled in the router's settings.
  • Check the Wi-Fi password.
  • Try changing the Wi-Fi channel to avoid interference.
  • For R733, try connecting to the 5.8GHz band for less interference and higher speeds.
Device Not Responding:
  • Perform a hard reset by pressing the reset button for 5-10 seconds.
  • Ensure the power supply is stable.

9. Specifications

9.1. General Specifications (R702)

Detailed specifications for Plery R702 4G Outdoor Router including chipset, memory, antenna, rates, physical interfaces, power, protection, and working environment
Detailed specifications for the R702 model.
FeatureDetail (R702)
ChipsetASR1803
CPU Frequency256Mb
Flash64Mb
Antenna2*5dBi for WiFi (Internal), 2*5dBi for LTE (External)
WiFi Rate300Mbps (WiFi6 2.4GHz 802.11b/g/n/ax)
LTE RateCat4: 150Mbps (DL MAX) / 50Mbps (UL MAX)
Physical Interfaces1x SIM Card Slot (Nano SIM), 1x RJ45 10M/100M LAN, 1x Reset Button, 1x DC Port
Power Supply24V 0.5A POE / DC 12V 1A
Protection ClassIP66
Working Temperature-10°C ~ 55°C (-40°F to 149°F)
Storage Temperature-40°C ~ 70°C
Operating Humidity10% ~ 90%RH (non-condensing)
Storage Humidity5% ~ 95%RH (non-condensing)
WAN Type4G/3G/2G or Wired
4G/3G FeaturesAuto-APN/Auto dial-up/Roaming/SMS(Send/Receive/Delete)/USSD
Wi-Fi Standards802.11b/g/n/ax (WiFi 6)
Max. LAN Data Rate300Mbps
Wi-Fi Supported Frequency2.4G
Supports WPSNo
Supports WDSNo
FunctionFirewall, QoS
ApplicationSoho, Home, Outdoor Surveillance, Industrial IoT
CertificationCE, FCC

9.2. General Specifications (R733)

FeatureDetail (R733)
4G CategoryCat.6 (DL 300Mbps / UL 50Mbps)
Carrier AggregationYes (2CA)
WiFi Standard802.11b/g/n/ac (WiFi 5)
WiFi Speed2.4GHz 300Mbps + 5.8GHz 867Mbps = 1200Mbps
WiFi BandDual‑band (2.4G + 5.8G)
Waterproof RatingNot rated (sheltered outdoor)
Antennas2× external LTE (detachable, upgradeable), 2× internal WiFi
Ethernet Ports1× Gigabit WAN/LAN + 1× Fast LAN
Power OptionsPoE 24V/1A + DC 12V/2A
Max User Devices32+
ChipsetMT7621A + Qualcomm SDX12
Memory1024Mb DDR + 128Mb Flash
Failover (WAN backup)Yes
Operating Temp0℃~40℃
MountingPole/wall (brackets included)

9.3. Supported Frequency Bands (Global)

Table showing network frequency bands supported by different regions (Europe, Asia, Oceania, American, Africa)
Network Frequency Bands Supported by Different Regions.

Both models support a wide range of global 4G FDD, 4G TDD, and 3G WCDMA bands. Please verify compatibility with your local carrier's frequency bands.

  • 4G FDD: B1/B3/B5/B7/B8/B20/B28/B32
  • 4G TDD: B38/B40/B41
  • 3G WCDMA: B1/B3/B5/B8
  • 2CA Carrier Aggregation (R733 only): Multiple combos (1A-1A/3A/5A…, 3A-3A/5A…, 7A-7A/8A…, etc.)

9.4. Product Dimensions

Dimensions of the Plery 4G Outdoor Router: 163mm height, 85mm width, 43.5mm depth
Product dimensions.
  • Height: 163mm
  • Width: 85mm
  • Depth: 43.5mm

10. User Tips

  • Maximize Signal: Even in low coverage areas, the router can maximize connection. Experiment with antenna positioning for best results.
  • SIM Card Compatibility: While generally compatible, some users noted better performance with specific carriers (e.g., KT SIM cards in Korea).
  • Check APN Settings: If you experience connectivity issues, manually verify or configure the APN settings for your specific mobile operator.
  • Remote Management: The web GUI allows for remote management, including port forwarding and VPN setup, for advanced users.
  • Outdoor Durability: The R702 is IP66 rated for harsh weather. For R733, consider sheltered outdoor installation or a weatherproof enclosure.

11. Warranty and Support

Plery (Shenzhen Four Seas Global Link Network Technology Co., Ltd.) provides the following:

  • Warranty: 1-year warranty.
  • Technical Support: Available for product assistance.
  • Certifications: CE, FCC (applied on request).

For technical support or warranty claims, please contact the manufacturer:

  • Manufacturer: Shenzhen Four Seas Global Link Network Technology Co., Ltd.
  • Hotline: 4009-001-766
  • Website: www.szcomfast.com

Product specifications and information in this manual are for reference and subject to updates without notice. This manual is intended as a user guide only.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.