1. Overview
The GuliKit ES Pro E-sports controller is a versatile wireless gamepad designed for competitive gaming across multiple platforms including Nintendo Switch, PC, and Android devices. It features advanced TMR Joysticks, Hall Effect triggers, and customizable settings for an optimized gaming experience. This manual provides detailed instructions for setup, operation, and maintenance of your controller.
2. Specifications
| Feature | Specification |
|---|---|
| Brand Name | GuliKit |
| Model Number | ES PRO E-sports Game Controller |
| Type | Gamepads |
| Joystick Sensor Module | TMR Joysticks |
| Trigger Button Type | Hall-Linear |
| Hall Effect | Yes |
| Compatible Platform | Nintendo Switch, PC, Android |
| Compatible Nintendo Model | Nintendo Switch 2, Nintendo Switch |
| Battery Included | Yes |
| Battery Capacity | 950mAh Polymer Battery (lasts for 30 hours) |
| Wired Polling Rate | 1000Hz |
| Bluetooth Polling Rate | 730Hz |
| Certification | CE |
| Origin | Mainland China |
3. Package Contents
- GuliKit ES Pro E-sports Controller
- USB-C Cable (included with ES PRO model)
- User Manual
4. Controller Layout
Familiarize yourself with the buttons and ports on your GuliKit ES Pro controller:

Front view of GuliKit ES Pro controllers in black and white.
- USB-C Port: For charging and wired connection.
- Indicator Light:
- Orange - Charging
- Green - Fully charged
- Flashing light - Pairing mode
- Solid White - No custom settings configured
- Solid Blue - Custom settings configured
- Power-Off Button: Press to power on, press and hold to power off.
- Home Button: Standard home button functionality.
- Setting Button: Used in combination with other buttons for custom settings.
- Pairing Button: Press and hold to enter pairing mode.
- Slide Switch: Located on the back, used to change controller mode (PC/NS).

Top view of the white GuliKit ES Pro controller showing the USB-C port and shoulder buttons.

Back view of the white GuliKit ES Pro controller showing the mode switch.
5. Setup
5.1 Initial Setup
- Charging: Connect the controller to a power source using the included USB-C cable. The indicator light will be orange while charging and turn green when fully charged.
- Power On/Off: Press the Power-Off button to turn on the controller. Press and hold the Power-Off button to turn it off.
- Auto Power Off: The controller will automatically power off after 15 minutes of inactivity. It will not power off when connected via USB or when Auto-Continuous Fire (Turbo) is active.
5.2 Calibration
It is recommended to perform calibration if you experience any issues with joystick or gyroscope accuracy.
- Joysticks Calibration:
- While the controller is powered on, press and hold the "L," "R," "D-pad Left," and "B" buttons simultaneously for 6 seconds to enter calibration mode.
- During calibration, rotate both the left and right joysticks in full circles 2 to 3 times.
- Once calibration is complete, the controller will vibrate once to indicate success and will automatically exit calibration mode.
- Gyroscope Calibration:
- While the controller is powered on and placed on a flat surface, press and hold the "+", "-", "D-pad Left", and "B" buttons simultaneously to initiate automatic gyroscope calibration.
- Once calibration is complete, the controller will vibrate once to indicate success.
Note: Calibration is not necessary when the gyroscope is functioning normally.
5.3 Pairing Methods
The GuliKit ES Pro controller supports various pairing methods depending on your device.
- PC Bluetooth Pairing (730Hz Polling Rate):
- Switch the controller to PC mode using the slide switch on the back.
- Press and hold the pairing button for 2 seconds until the indicator light begins flashing rapidly, indicating that pairing mode has started.
- On your computer, open the Bluetooth settings, search for new devices, and select "GuliKit XW Controller" to pair.
- Once the interface displays "Connected", the pairing is complete.
- PC Wired Connection (1000Hz Polling Rate):
- Set the controller to PC mode.
- Connect one end of the USB-C to USB-A data cable to the controller, and insert the other end into a USB-A port on your computer.
Note: If you're using a desktop computer, it is recommended to use one of the USB ports on the back of the computer case for a more stable connection.
- Wireless Pairing with Android Devices:
- Set the controller to PC mode.
- Press and hold the pairing button for 2 seconds until the indicator light starts blinking quickly, indicating that pairing mode has been activated.
- On your phone, go to Bluetooth settings, search for new devices, and select "GuliKit XW Controller".
- The interface displays "Connected" to the new controller, indicating that the pairing is complete.
- Pairing Methods with Switch/Switch 2:
- Set the controller to NS mode, turn it on, then press and hold the pairing button for 2 seconds. The indicator light will blink quickly, indicating that pairing has started.
- When the Switch / Switch 2 is on the black screen (sleep) state, press the HOME button on the Joy-Con to wake it up. It will then enter the controller pairing interface.
- Once the interface shows that a new controller is connected, the pairing is complete.
Video: Special pairing method for Switch 2 wake-up. This video demonstrates the steps to pair the GuliKit ES Pro controller with a Nintendo Switch 2, including setting the controller to NS mode, initiating pairing, and waking up the Switch 2 from sleep mode to complete the connection.
6. Operating Instructions: Custom Settings
All customized settings require holding the Setting button while pressing the corresponding buttons. When customized settings are configured, the indicator light will turn blue. When no customized settings are configured, the indicator light will remain white. When the battery is low, the indicator light will flash, and the vibration function will automatically turn off. Once the battery level is restored, vibration will turn back on automatically.
- Clear All Settings (Reset): Press and hold the Setting button + 0 (Zero) button. A long vibration indicates that the reset process is complete and the controller has been restored to its default settings.
- Joystick Dead Zone Setting: Press and hold the Setting button + Left Joystick (L3) + Right Joystick (R3). One vibration indicates the dead zone is enabled on joysticks. A long vibration indicates the dead zone is disabled on joysticks (Default).
- Continuous Fire (Turbo) Setting: Press and hold the Setting button + A button.
- One vibration: Manual Turbo Mode - Continuous fire is activated while holding the button and stops when released.
- Two vibrations: Auto Turbo Mode - Press the button once to start continuous fire, and press it again to stop.
- Long vibration: Disables both manual and auto turbo modes (Default).
This setting applies to A, B, X, Y, R, and ZR buttons.

Diagram illustrating Semi-auto Turbo and Full-auto Turbo functions for A, B, X, Y, R, ZR buttons.
- A-B X-Y Button Swap: Press and hold the Setting button + A button + B button. One vibration swaps the input functions of the A-B and X-Y buttons. A long vibration restores the default button assignments (Default).

Image showing non-physical A-B/X-Y button swap between PC-layout and Switch-layout functions.
- Adjust Vibration Intensity: Press and hold the Setting button + Vibration button.
- One vibration: Weak vibration.
- Two vibrations: Standard vibration (Default).
- Three vibrations: Strong vibration.
- Long vibration: Turn off vibration.

Diagram showing asymmetric rotory vibration motors for immersive gaming with 3-level adjustment.
- Adjust Joystick Sensitivity: Press and hold the Setting button + R3 (Right Joystick press) + L3 (Left Joystick press).
- One vibration: Sensitivity 50%.
- Two vibrations: Sensitivity 100% (Default).
- Three vibrations: Sensitivity 150%.
Each joystick can be configured individually.

Graphic illustrating 3 levels of adjustable joystick sensitivity: 50%, 100%, 150%.
- Set 4-Direction Mode on D-Pad: Press and hold the Setting button + D-Pad Up + D-Pad Down + D-Pad Left + D-Pad Right. One vibration switches the D-pad to 4-direction mode. A long vibration restores the default 8-direction mode (Default).

Image showing support for quick switch to 4-direction from 8-direction D-pad for precise weapon swap in FPS games.
- Adjust Motion Aim Assist for PC FPS Games: Press and hold the Setting button + ZL button.
- One vibration: Low-sensitivity aim assist.
- Two vibrations: Medium-sensitivity aim assist.
- Three vibrations: High-sensitivity aim assist.
- Long vibration: Motion aim assist disabled (Default).
Button Activation Settings:
- Setting button + L: Motion assist activates while holding the L button in-game.
- Setting button + ZL: Motion assist activates while holding the ZL trigger in-game.

Image showing patented gyro motion aim function for faster aiming in PC FPS games.
7. Maintenance
- Keep the controller clean and dry. Use a soft, dry cloth to wipe the surface.
- Avoid exposing the controller to extreme temperatures, humidity, or direct sunlight.
- Do not attempt to disassemble the controller, as this may void your warranty and cause damage.
- CAUTION: This product contains small parts (such as buttons, joystick caps, and screws) that may pose a choking hazard if swallowed by children. Keep out of reach of small children.
8. Troubleshooting
- Controller not pairing: Ensure the mode switch is set correctly for your device (PC or NS). Hold the pairing button for 2 seconds until the indicator flashes rapidly. Check your device's Bluetooth settings to ensure it's searching for new devices.
- Switch 2 wake-up not working: For the Switch 2 wake-up function to work, ensure the Switch 2 is in black screen (sleep) mode before initiating the pairing process.
- Latency issues with PC Bluetooth: For Windows 10/11 Bluetooth devices, try disabling "Show notifications to connect using 'swift Pair'" in your settings. This can reduce latency by approximately 1ms. If connecting multiple devices, consider using one adapter per controller for optimal performance. Avoid 2.4GHz Wi-Fi interference by using 5GHz Wi-Fi.
- Joystick drift or inaccuracy: Perform the joystick calibration procedure as described in Section 5.2.
- Gyroscope not responding: Ensure the controller is placed on a flat surface and perform the gyroscope calibration procedure as described in Section 5.2.
9. User Tips
- The controller features soft D-Pads and offers a fast connection, providing a responsive gaming experience.
- Users report virtually no delay in Bluetooth connections, making it suitable for competitive play.
- The wake-up function for Nintendo Switch and Switch 2 is highly appreciated for convenience, allowing you to turn on your console directly from the controller.
- The TMR joysticks are noted for good performance, though some users observe minor circularity test variations.
- The buttons (excluding D-pad, L3, and R3) are generally quiet, contributing to a less noisy gaming session.
- The ES Pro version includes force gyro functionality. Note that it does not feature back buttons.
- While the controller offers many features, some users have noted the absence of a dedicated companion app for advanced settings, which might make initial setup feel less intuitive for some.
10. Warranty and Support
For more questions and answers, you can visit the official GuliKit website and navigate to the "Support" section. Look for the "Frequently Asked Questions" (FAQ) related to your controller model.
Official Website: www.gulikit.com