Foreword
Thank you for purchasing our 6-inch camera monitor. Please read this manual carefully before using the unit. Have a great experience!
Safety Instructions and Cautions
- Please avoid heavy impact and dropping the product onto the ground.
- Do not cover the vents and holes on the enclosure. Do not place the machine on a bed, sofa, or rug to ensure good ventilation. Otherwise, it will lead to overheating and reduce the service life.
- The screen of this product is made of glass. Do not drop the screen towards the ground. Keep away from injury if the screen is broken.
- Keep the product away from heat sources such as radiators, water heaters, stoves, and other heating products.
- Avoid prolonged exposure to the sun as the LCD screen may be damaged.
- To avoid damaging the product, do not disassemble or repair the unit yourself. There are no user-adjustable components inside.
- To maintain the LCD screen, follow these guidelines to avoid scratches, discoloration, and other damages:
- Refrain from using hard objects to hit the screen.
- Do not force to wipe the screen.
- Do not use chemical solutions to clean the screen.
- Do not spray any detergent directly on the screen.
- Do not write on the screen directly.
- Do not stick anything on the screen.
- Simply wipe with a clean, soft cloth and ensure no water is on the screen.
- To protect the plastic cover, follow these guidelines:
- Do not use chemical solutions to clean the cover.
- Keep away from volatile substances.
- Do not clean the case harshly.
- Simply wipe with a clean, soft cloth and ensure no water is on the cover.
Key Features
- 6-inch 1920x1080 Full HD IPS screen.
- Super lightweight, ideal for gimbal use (204g unit weight).
- 1200nit high brightness, visible in sunlight.
- Simple and intuitive button operation.
- Custom 3D LUT support for previewing film looks.
- Equipped with Waveform, Vectorscope, RGB Histogram, Focus Assist, Monochrome, and other functions to help accurately expose and focus every shot.
- Multiple power supply modes: DC IN 12V, Type-C 5V, and NP-F battery slot.
- Stereo Earphone output.
- DC 8.4V power out to power your DSLR or mirrorless camera.


Setup Guide
1. What's in the Box

2. Product Overview (Front and Rear Panels)

3. Port Instructions
The monitor features various input and output ports for connectivity and power.

- DC OUT 8.4V: DC power output interface (polarity: +--). Used for powering your camera with a separately available DC coupler via adapter (e.g., NP-FW50 Sony, LP-E6 Canon, DMW-BLF19 Panasonic).
- 3.5mm Earphone port: Stereo Earphone output.
- DC IN 5V (Type-C): Type-C power input. Recommended for local power supply only. Not recommended for connecting other devices to provide loop-out power. Also used for firmware updates and LUT file import.
- HDMI IN: V2.0, HDMI signal input, up to 4K@60Hz.
- HDMI OUT: V2.0, HDMI signal output, up to 4K@60Hz.
- DC IN 12V: DC power input interface (polarity: --+). Suitable for Barrel 5.5x2.1mm power cable plug. Suggest using a 12V/1.5A power adapter. Supports DC 7~24V input.
- 1/4 Screw Thread: Located on the bottom and right side for mounting.
4. Power Supply Options
The monitor offers multiple ways to be powered:
- NP-F Battery Plate: The rear panel is equipped with an NP-F battery plate, compatible with NP-F series batteries (e.g., Sony F970, F960, F950, F930, F770, F750, F730, F570, F550, F530 series). It is recommended to use standard original F970 batteries for optimal performance. Different battery specifications offer varying capacities and working times. Always remove the battery if the monitor will not be used for a long period.
- DC IN 12V: Use a 12V/1.5A power adapter connected to the DC IN 12V port.
- Type-C 5V: Connect a power bank to the Type-C 5V input port for power supply. This port is for power only and not for data transmission.

5. Sunshade Installation
The sunshade helps improve screen visibility in bright conditions.

- Attach the Velcro (hook side) ① to the outside of the sunshade frame.
- Open the sunshade ③.
- Align the Velcro (loop side) on the inside of the sunshade with the Velcro (hook side) ② on the monitor sunshade frame.
- Complete the sunshade installation ④.
Operating Instructions
1. Button Instruction

| Button | Function when OSD is not displayed | Function when OSD is displayed |
|---|---|---|
| F1 | Custom button F1 | / |
| F2 | Custom button F2 | / |
| F3 | Custom button F3 | / |
| MENU | Display OSD Main menu | Return to previous OSD menu |
| V | Decrease the volume or backlight | Select next menu item; Decrease or adjust value of selected parameter |
| ^ | Increase the volume or backlight | Select previous menu item; Increase or adjust value of selected parameter |
| EXIT/Power | Power On/Off button | Return/Exit Menu |
After correctly connecting to the power supply (red indicator), the monitor will turn on automatically. The indicator turns Yellow, and upon HDMI signal input, it will turn Green from Yellow.
You can also set the power to "Manually" in the menu (System -> Power setting). After setting, you need to long press the EXIT/Power button to turn on the monitor when the power supply is plugged in.
2. Menu Operation
- When the menu is not displayed, directly press the "V" or "^" button to adjust the volume or backlight. This can be set in the "Left Right Key Set" of the "User Option" menu.
- Press the "MENU" button to enter the OSD main menu, then use "V" or "^" to select an option.
- Press the "MENU" button again to enter the secondary menu. Use "V" or "^" to select items. After selecting, press "MENU" to confirm and enter the function menu. Use "V" or "^" to select the corresponding function or adjust parameters, then press "MENU" to confirm.
- Press "EXIT/Power" button to return or exit the menu.
3. Menu Function Instruction
The monitor provides a full range of auxiliary functions to assist with accurate exposure and focus.

- Assist:
- All Waves: On/Off. When on, waveform, vector, histogram, and embedded audio will be shown.
- Waveform: On/Off. Modes: RGB, YUV, Y. Position X/Y: 0~100 (moving horizontally/vertically). Waves Trans.: Off, 25%, 50%, 75%. Assists with calibration and shows overall image brightness.
- Vector: On/Off. Position X/Y: 0~100. Shows image saturation and pixel distribution on the color spectrum.
- Histogram: On/Off. Modes: RGB1, RGB2, Y. Position X/Y: 0~100. Displays color tone distribution and exposure status. Y Histogram checks picture brightness.
- Focus Assist: On/Off. Color: Red, Green, Blue. Peaking Level: 1~10. Highlights in-focus areas for quick and accurate focusing.
- Embedded Audio: On/Off. Position X/Y: 0~100. Provides numerical indicators and headroom levels for audio.
- Over Exposure: On/Off. Exposure Level: 10~100. Highlights overexposed areas with a striped pattern.
- Check Field: On/Off. Mode: Red, Green, Blue, Mono. Quickly adjusts hue and saturation.
- False Colors: On/Off. Mode: Normal, ARRI. Depicts objects in colors different from a true color image to show exposure levels.
- Marker:
- Grid: On/Off. Modes: 2x2, 3x3, ..., 9x9, Custom. Rows/Columns: 2~9. Color: Red, Green, Blue, Black, White, Gray. Divides the picture into equal grids.
- Safe Frames: Color: Red, Green, Blue, Black, White, Gray.
- Center Marker: On/Off. Color: Red, Green, Blue, Black, White, Gray.
- Ratio Marker: On/Off. Modes: 4:3, 13:9, 14:9, 15:9, 16:9, 1.85:1, 2.35:1, 9:16. Color: Red, Green, Blue, Black, White, Gray. Modified Mark: 0~5.
- Scan Mode: Under Scan, Over Scan.
- Aspect Ratio: Auto, 16:9, 16:10, 4:3, 5:4, 1.85:1, 2.35:1, Full Screen. Provides various aspect ratios for anamorphic lenses.
- Anamorphic: On/Off. Modes: 1.33X, 1.6X, 2.0X, 2.0X MAG, User (1.20X~2.00X customizable). Allows viewing unsqueezed images from anamorphic lenses.
- Image Flip: On/Off. Mode: H Flip, V Flip, H_V Flip.
- Zoom Mode: On/Off. Mode: 2X, 4X, 9X, 16X, User (100%~200% customizable). Amplifies HD signal for high-quality close-ups.
- Image Freeze: On/Off. Enables checking the image from a 1:1 signal source without scaling.
- User Option:
- LUT: On/Off. Supports SLOG2, SLOG3, LOGC, VLOG. LUT Import: Confirm. Lut Table: Shows 4 built-in LUTs and up to 32 custom loaded LUTs.
- HDR: On/Off. Mode: HLG1, HLG2, HLG3. Provides dynamic range and image details, reflecting real-world visual effects.
- Backlight: 0~100. Adjusts screen brightness.
- Brightness: 0~100. Adjusts image brightness.
- Contrast: 0~100. Adjusts ratio between brightest and darkest parts.
- Saturation: 0~100. Adjusts color concentration.
- Tint: 0~100.
- Color Adjustment (Display Range): Auto, Limit, Full. Selects grayscale range (16-235 or 0-255).
- Color Temp.: 5600K, 6500K, 9300K, User (0~255 RGB adjustment).
- Shortcut Key: Sets F1~F3 custom buttons.
- Left Right Key Set: Volume, Backlight.
- System:
- User Switch: 1~4. Save and recall menu settings.
- Language: Japanese, French, German, Italian, Spanish, Portuguese, Russian, English, Korean, Dutch, Simplified Chinese, Traditional Chinese Style.
- OSD Time: Off, 15Sec, 30Sec, 45Sec.
- OSD Trans: Off, 25%, 50%, 75%. Adjusts menu background transparency.
- No Signal: Red, Green, Blue, Black, White, Gray. Changes background color when no signal.
- EDID Settings: 2.0, 1.4. Compatible with different camera/device resolutions. Default to 2.0.
- Volume: 0~100. Adjusts speaker volume.
- Power on: Auto, Manual. Default to Auto. If Manual, long press EXIT/Power to turn on.
- Reset: Select Reset and press MENU Confirm to restore original settings.
- Firmware Update: Displays version number. To upgrade: 1. Format USB flash drive to FAT32. 2. Copy update file to USB drive. 3. Insert USB drive via Type-C to USB adapter. 4. Connect to monitor. 5. Press MENU Confirm to update. Monitor will turn off automatically. Check firmware version after.



4. How to Load LUT
The monitor supports loading up to 32 custom 3D LUT files.

Requirements:
- USB flash drive format: FAT32.
- LUT's documentation: Format suffix is .cube (case insensitive).
- A single file must not exceed 7.9MB.
- Supports files with LUT-3D-SIZE of 16, 17, 32, 33, 64, 65.
- The LUT file name is required to be in English or numeric.
Steps for loading:
- Make sure the USB flash drive is inserted into a Type-C to USB adapter and connected to the monitor's TYPE-C interface.
- Enter the main menu: Assist -> LUT -> Lut Import -> click Confirm to load. The monitor will auto-detect the USB flash drive.
- If there is a valid LUT file on the USB flash drive, the monitor will load the LUT files and show "[n] name." The "[n]" indicates the quantity number. If loading is successful, the screen will show "complete[n]". [n] stands for the quantity number, which should be under 32.
How to clear up the imported LUTs:
Insert an empty USB flash drive into the monitor, enter the main menu: Assist -> LUT -> Lut Import -> click Confirm. The imported LUTs will be cleared.
Maintenance
Proper maintenance ensures the longevity and optimal performance of your FEELWORLD FW568 PRO monitor.
- Cleaning the Screen: Use a clean, soft, lint-free cloth to gently wipe the screen. Do not use chemical cleaners, abrasive materials, or spray liquids directly onto the screen. Ensure the cloth is only slightly damp if necessary, and dry immediately.
- Cleaning the Casing: Wipe the monitor's casing with a clean, soft cloth. Avoid harsh cleaning agents or volatile substances.
- Storage: When not in use for extended periods, remove the battery and store the monitor in a dry, cool place, away from direct sunlight and extreme temperatures.
- Ventilation: Always ensure the monitor's ventilation openings are clear and unobstructed to prevent overheating.
- Handling: Avoid dropping or subjecting the monitor to heavy impacts.
Troubleshooting
1. Only black and white or monochrome picture:
- Check saturation, brightness, and contrast adjustments in the menu.
- Check if "Check Field" is set to black, white, or monochrome image mode, or any other condition that might cause this.
2. No Image after powering on:
- Check if the signal cable connection is in good condition.
- Verify the signal cable connection and ensure you are using the standard adapter to connect the monitor.
- If power is supplied by battery, check if the battery is fully charged.
3. Earphone No sound:
Check if the Volume control is open. Press the volume button and try to increase the volume.
If you encounter any other problems, please contact FEELWORLD customer support for assistance. Product features and performance are subject to improvement without prior notice.
Technical Specifications
| Parameter | Value |
|---|---|
| Panel Size | 6" IPS |
| Resolution | 1920x1080 pixels |
| Dot Pitch | 0.069 (H) × 0.069 (V) mm |
| Aspect Ratio | 16:9 |
| Brightness | 1200cd/m² |
| Contrast | 1000:1 |
| Viewing Angle | 80°/80°(L/R) 80°/80°(U/D) |
| Backlight | LED |
| Signal Input | HDMI 2.0 |
| Signal Output | HDMI 2.0 |
| Audio | 3.5mm Stereo Headphone |
| HDMI Support Format | 480i/576i/480p/576p 720p (60/59.94/50/30/29.97/25/24/23.98) 1080i (60/59.94/50) 1080p (60/59.94/50/30/29.97/25/24/23.98) 3840×2160p (60/50/30/29.97/25/24/23.98) 4096×2160p (60/50/30/29.97/25/24/23.98) |
| Power In | DC IN 12V, Barrel (5.5mm outer, 2.1mm inner); DC IN 5V (Type-C) Note: please use more than 5V/2A Type-C power supply |
| Power Out | DC OUT 8.4V, Barrel (5.5mm outer, 2.1mm inner; Power DSLR or mirrorless camera) |
| Input Voltage | DC: 7~24V |
| Power Consumption | ≤11W |
| Battery Plate | NP-F Battery Plate |
| Install Way | 1/4-20 mount points (bottom, right) |
| Unit Size | 161x96x33.3 (mm) |
| Unit Weight | 204g |
| Working Temperature | 0°C ~ 50°C |
| Storage Temperature | -10°C ~ 60°C |
User Tips
Based on common user experiences, here are some tips for getting the most out of your FW568 PRO monitor:
- Outdoor Visibility: The 1200nit brightness is excellent for outdoor shooting. For even better visibility in direct sunlight, always use the included sunshade.
- Battery Management: If using NP-F batteries, consider carrying a spare, especially for longer shoots, as battery life varies with usage and brightness settings. Remember to remove batteries during long storage periods.
- Gimbal Use: The lightweight design (204g) makes it ideal for gimbals. Ensure proper balancing after attaching the monitor to avoid strain on your gimbal motors.
- Custom LUTs: Experiment with custom 3D LUTs to achieve your desired film look directly on set. Keep your LUT files organized and ensure they meet the specified format and size requirements for smooth import.
- Custom Buttons: Utilize the F1, F2, F3 custom buttons to quickly access your most frequently used monitoring tools (e.g., Waveform, Focus Assist, False Colors) to streamline your workflow.
- Firmware Updates: Periodically check the FEELWORLD website for firmware updates to ensure you have the latest features and bug fixes.
Warranty and Support
FEELWORLD products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the official FEELWORLD website or contact your authorized dealer.
Please keep your purchase receipt as proof of purchase for any warranty claims.
Product Video Overview
Additional Documentation
A detailed user manual in PDF format is available for download. This document provides comprehensive instructions and diagrams for advanced usage and troubleshooting.
You can access the PDF manual here: FEELWORLD FW568 PRO User Manual (PDF)