BioloMix 3-in-1 High-Speed Blender User Manual

Important Safeguards

When using this electrical appliance, basic safety precautions should always be followed, including the following:

1. Read all instructions.
2. Before using, check that the voltage indicated on the product corresponds with the voltage of your electrical outlet.
3. Do not let the cord hang on a hot surface or over the edge of a table or counter.
4. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or has been damaged in any manner.
5. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.
6. Close supervision is necessary when any appliance is used by or near children.
7. Avoid contacting the moving parts.
8. Keep hands and utensils out of the container while blending to reduce the risk of severe injury to persons or damage to the blender. A scraper may be used but must be used only when the blender is not running.
9. The use of attachments not recommended or sold by the manufacturer may cause fire, electric shock, or injury.
10. Unplug from the outlet when not in use, before putting on or taking off parts, and before cleaning. To disconnect, turn any control to "off", then remove the plug from the wall outlet by grasping the plug, not the cord.
11. To reduce the risk of injury, never place the blade assembly on the motor unit without the jar properly attached.
12. This appliance shall not be used by children. Keep the appliance and its cord out of reach of children. Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved.
13. Children should be supervised to ensure that they do not play with the appliance.
14. Do not leave the machine unattended.
15. When removing the blender from the motor unit, wait until the blades have completely stopped.
16. Always operate the blender with the cover in place.
17. Always use the appliance on a secure, dry, level surface.
18. Never place this appliance on or near a hot gas or an electric burner or where it could touch a heated appliance.
19. Do not use outdoors.
20. Do not use the appliance for other than its intended use.
21. Care shall be taken when handling the sharp cutting blades, emptying the bowl, and during cleaning.
22. Switch off the appliance and disconnect from the supply before changing accessories or approaching parts that move in use.
23. Always disconnect the appliance from the supply if it is left unattended and before assembling, disassembling, or cleaning.
24. Be careful if hot liquid is poured into the blender as it can be ejected out of the appliance due to sudden steaming.
25. This appliance is intended to be used in household and similar applications such as:
    • Staff kitchen areas in shops, offices, and other working environments;
    • Farm houses;
    • By clients in hotels, motels, and other residential type environments;
    • Bed and breakfast type environments.

Product Overview

The BioloMix 3-in-1 High-Speed Blender is designed for versatile kitchen tasks, including blending, ice crushing, and grinding. It features a powerful 1300W motor and durable components for efficient operation.

Figure: Max 1300W Powerful Motor. Turns ice cubes to snow in seconds with powerful motor and stainless steel blades.

Figure: Durable 1.5L Glass Jar with 6-blade assembly for crushing frozen fruits and ice.

Components

Refer to the diagram below for an overview of the blender's main components:

Figure: Main components of the BioloMix Blender (Fig.1 and Fig.2 from manual page 4).

1. Measure cup
2. Cup cover
3. Glass jar
4. Blade Base
5. Main unit (Motor unit)
6. Speed knob
7. Key (Pulse, Ice, Smoothie buttons)

Figure: Portable cup with 4-blade assembly for fresh drinks and dry grinder cup with 2-flat blades for coffee beans, nuts, and spices.

Setup and Initial Use

Before first use, unpack the appliance and place all parts on a horizontal surface. The jar assembly (including the measure cup, lid, seal ring 1, jar unit, seal ring 2, blade assembly) is already assembled into the motor unit. Disassemble to wash all detachable parts except the motor unit. Refer to the "Care and Cleaning" section for detailed cleaning instructions.

Assembly Steps:

1. **Assemble the Jar Base:** Invert the jar unit onto a level surface, holding the jar handle. Place seal ring 2 and the blade assembly onto the blade base bottom. Secure the blade assembly by turning it clockwise until tight.
   

   Figure: Multi-function versatility of the blender, including blending, ice crushing, and pureeing.

2. **Attach the Lid:** Reposition the jar assembly with its opening upwards. Wrap seal ring 1 around the lid bottom and place the lid onto the jar assembly. Place the measure cup exactly into the lid by fitting the small projection on both sides of the cup into the slots of the lid and turning the jar cover clockwise until tight.
3. **Place on Motor Unit:** Finally, place the assembled jar onto the motor unit by aligning the strip on the assembled jar bottom.

CAUTION: The jar and jar base are now secure. Do not try to twist the jar and jar base onto the motor unit.

Operating Instructions

This appliance is for household use only.

General Blending Steps:

1. Prepare ingredients: Peel or core fruits/vegetables and cut them into small dices.
2. Load ingredients: Place the food to be blended into the jar. Usually, a certain amount of purified water needs to be added to facilitate smooth operation. The amount of mixture should not exceed the MAX level indicated on the jar.
3. Secure lid: Put the lid on the jar. Ensure the measuring cup is in place.
4. Plug in: Plug the power cord into a standard wall outlet.
5. Select speed: Turn the speed knob to the appropriate speed setting for your task.

Recommended Settings:

Note: Never use boiling liquids or run the appliance empty.

Special Functions:

• **Pulse Function:** For quick or delicate blending tasks, turn the speed knob to the "P" position and hold for a few seconds, then release. The knob will automatically reset to the "O" position. Repeat several times until the desired consistency is obtained.
• **Adding Ingredients During Operation:** If you want to add ingredients while the blender is working, remove the measuring cup and place them through the lid opening.
  

  Figure: Control panel with speed knob and preset buttons for Pulse, Ice Crushing, and Smoothie.

• **Crushing Ice or Hard Food:** Keep one hand firmly on the lid.
• **Stopping Operation:** When the desired consistency is obtained, turn the knob to the "O" position. If you want to stop the machine during operation, turn the knob to the "O" position anytime.

Important Operating Tips:

• For best circulation of food that is to be blended with some liquid, pour the liquid into the jar first, then add solids.
• Some tasks that cannot be performed efficiently with a blender include: beating egg whites, whipping cream, mashing potatoes, grinding meat, mixing dough, extracting juice from fruit and vegetables.
• Never place the following items in the unit as they may cause damage: bones, large pieces of solid, frozen food, or tough foods such as turnips.
• To crush ice, add up to 6 ice cubes. If more ice is needed, remove the cup and add cubes one by one through the lid opening.

Note: For each use, the consecutive operation time should be less than 3 minutes. At least 10 minutes rest time must be maintained between two continuous cycles. Let the unit cool to room temperature before performing the next operation cycle.

Care and Cleaning

This product contains no user-serviceable parts. Refer service to qualified service personnel.

1. Before cleaning, unplug the blender.
2. Always wash immediately after use for easier cleaning. Do not let food dry on the jar assembly as this will make cleaning difficult.
3. Pour a little warm soapy water into the jar and turn the knob to the MIN position for a few seconds. Then empty the jar.
4. Dismantle all detachable parts. Lift the jar assembly off the motor unit. To detach the blade assembly, turn it clockwise from the jar base bottom, and remove seal ring 2 and the blade assembly. In addition, detach the jar cover seal ring 1 from the jar cover.
5. Rinse the measuring cup, lid, sealing ring 1, jar unit, sealing ring 2, and blade assembly by hand or dry them. The temperature setting must not exceed 65°C.
6. Brush the blade clean using warm soapy water, then rinse thoroughly under the tap. Do not touch the sharp blades; handle carefully. Do not immerse the blade assembly in water. Leave to dry upside down away from children.
7. Wipe the motor unit with a damp cloth and dry thoroughly. Remove stubborn spots by rubbing with non-abrasive cleaner. If liquids spill into the motor unit, first unplug the unit, then wipe with a damp cloth and dry thoroughly.

Attention:

• Do not immerse the motor unit in liquid to prevent the risk of electric shock.
• Do not use rough scouring pads or cleansers on parts or finish.

Figure: Easy cleanup - Lid, glass jar, blades, and jar collar are dishwasher safe. Hand washing is also an option.

Troubleshooting

If you encounter any issues with your BioloMix Blender, please refer to the following common troubleshooting tips:

• **Blender does not turn on:**
  • Ensure the power cord is securely plugged into a working electrical outlet.
  • Check if the speed knob is in the "O" (off) position before turning it to a desired speed or pulse setting.
  • Verify that the jar assembly is correctly attached to the motor unit and the lid is securely in place. The blender has a safety interlock feature.
• **Ingredients are not blending smoothly:**
  • Ensure there is enough liquid in the jar to allow ingredients to circulate properly. Add more liquid if necessary.
  • Cut larger ingredients into smaller pieces (e.g., 15mm cubes for fruits/vegetables).
  • Do not overload the blender. Ensure the mixture does not exceed the MAX level.
  • Use the "Pulse" function for tough ingredients or to break down larger chunks before continuous blending.
• **Blender stops during operation:**
  • The blender may have overheated. Allow the unit to cool down for at least 10 minutes between continuous cycles.
  • Check for any obstructions or hard items (like bones or large frozen chunks) that might be jamming the blades. Unplug the unit before checking.
• **Leakage from the jar:**
  • Ensure all seal rings (seal ring 1 and seal ring 2) are correctly positioned and not damaged.
  • Make sure the blade assembly is tightly secured to the jar base.
  • Verify that the lid and measure cup are properly seated and twisted to lock.

If the problem persists after following these steps, please contact customer support for assistance.

Specifications

Figure: Blender dimensions. Main unit: 150mm (width) x 390mm (height). Portable bottle: 215mm (height). Grinder cup: 140mm (height).

User Tips

• For optimal blending, always add liquids first, then soft ingredients, and finally harder ingredients or ice.
• If making smoothies, using frozen fruit can help achieve a thicker, colder consistency without needing as much ice.
• When grinding dry ingredients like coffee beans, ensure the grinder cup is completely dry to prevent clumping.
• To prolong the life of your blender, avoid continuously running it for more than 3 minutes. Give it a 10-minute break between cycles.
• For quick cleaning, blend a small amount of warm water with a drop of dish soap, then rinse thoroughly.

Warranty and Support

This product is manufactured by Biolomix. For any service, support, or warranty inquiries, please contact the distributor directly.

Distributor: BIOLOMIX GROUP LIMITED

Address: FLAT/RM 5003, 5/F, YAU LEE CENTRE, 45 HOI YUEN ROAD, KWUN TONG, KOWLOON, HONG KONG CHINA.

Email: support@biolomixusa.com / biolomix@vigormix.com

A user manual in PDF format is available for download. You can view it here.

Product Demonstration Video