BAOFENG UV-5R Mini

Contents

BAOFENG UV-5R Mini Multi-Band Walkie Talkie User Manual

Model: UV-5R Mini

1. Introduction

Thank you for purchasing the BAOFENG UV-5R Mini, a dual-band, dual-display, and dual-watch FM handheld transceiver. This radio is designed to provide secure, instant, and reliable communications with peak efficiency. Please read this manual carefully before use to ensure maximum performance and safe operation of your device.

WARNING!

  • European Users should note that operation of this unit in Transmit mode requires the operator to have a valid Amateur Radio License from their respective Countries Amateur Radio Licensing Authority for the Frequencies and Transmitter Power levels that this Radio transmits on. Failure to comply may be unlawful and liable for prosecution. Refer to the “EU” specification guide 2014/53/EU.
  • When programming the radio, start by reading the factory software data, and then rewrite this data with your frequency etc., to a new saved code plug, otherwise errors may occur. Use a programming cable with a PC to program authorized frequencies, bandwidth, power, etc. Your programming must comply with your FCC (or EU other country) license certification.
  • Before using this product, read the RF Energy Exposure and Product Safety Guide that ships with the radio, which contains instructions for safe usage and RF energy awareness and control for compliance with applicable standards and regulation.
  • PMR446, FRS, GMRS, MURS: You may be tempted to use PMR446 (in Europe) or FRS, GMRS, MURS (in the USA) frequencies. Do note however that there are restrictions on these bands that make this transceiver illegal for use.

2. Product Overview

The BAOFENG UV-5R Mini is a compact and powerful multi-band walkie talkie. Its design emphasizes portability and ease of use, featuring a 1.44" TFT large screen and dual PTT keys.

BAOFENG UV-5R Mini Walkie Talkie with multi-band frequencies, 999 channels, Dual PTT, 1600mAh battery, AM/FM, Bluetooth Programming, Wireless Copy Frequency.

Figure 1: BAOFENG UV-5R Mini Walkie Talkie

2.1 Items in the Package

The standard package includes the following items. Note that the charger and power adapter are subject to the final configuration of the dealer.

ItemQuantity (PCS)ItemQuantity (PCS)
Radio1Lanyard1
Battery1Operation Manual1
Antenna1Belt Clip1
Image showing the walkie-talkie and its accessories: Antenna, Battery, Clip, Type-C Charger, Lanyard.

Figure 2: Package Contents

2.2 Product Diagram

Diagram of the BAOFENG UV-5R Mini Walkie Talkie with numbered parts: 1. Antenna, 2. SK1-Customized Function Keys/Monitor button, 3. PTT-A Button, 4. OK/Menu button, 5. V/M-VFO/MR, 6. PTT-B Button, 7. Numeric Keypad, 8. Flashlight, 9. Volume/Power Knob, 10. Screen, 11. Accessory Port, 12. Cancel/Back button, 13. Up button/Down button, 14. A/B, 15. Microphone, 16. LED Indicator, 17. Battery Latch, 18. Type-C Charging indicator light, 19. Type-C Charging Port, 20. Search/Flashlight button.

Figure 3: Product Overview Diagram

2.3 LCD Display Icons

The LCD screen provides visual feedback on the radio's status and settings. Below is a table explaining the common icons:

IconDescription
RSSISquelch Open/Close Indicator
H/LTransmit power level indicator, According to Power
♪Make sure you can hear the DTMF side tone from the radio speaker, set to DT-ST, ANI-ST, DT+ANI.
DDCS enabled
CCTCSS enabled
+Enables access of repeaters in VFO/Frequency Mode. TX will be shifted higher in frequency than RX.
-Enables access of repeaters in VFO/Frequency Mode. TX will be shifted lower in frequency than RX.
DDual watch enabled
🔒Keypad lock enabled
VVOX enabled
☎The confidential calling feature is activated
NNarrowband enabled
🔋Battery level indicator
RReverse function enabled
TThe terminal is switched from transit mode to pass-through mode.
SCRThe voice scramble function has been activated

3. Setup

3.1 Attaching the Antenna

Turn the antenna clockwise until it is tight. To remove the antenna, turn it counterclockwise.

CAUTION:

  • Do not hold the radio antenna in your hand, as this will reduce the performance of the radio and the life of the antenna.
  • Do not shake the radio with the top of the antenna in your hand, as this will degrade the performance and life of the radio antenna.

3.2 Battery Charging

When using the terminal for the first time, a low battery warning may occur. It is recommended to turn off the radio during charging. The battery's LEDs provide an indication of the current state of charge:

Indicator lightCharging status
Red light is always onCharging
Green light is always onCharging complete
Image showing the Type-C charging port on the walkie-talkie.

Figure 4: Type-C Charging Port

The UV-5R Mini supports Type-C charging, allowing you to charge it with various universal chargers, such as those used for phones, power banks, or laptops.

4. Operating Instructions

4.1 Basic Operations

Turning your Radio On and Off

  • To turn your radio ON, turn the [Volume/Power] rotary knob clockwise.
  • To turn your radio OFF, turn the [Volume/Power] rotary knob counterclockwise.

Setting the Volume

  • Increase volume by turning the [Volume/Power] rotary knob clockwise.
  • To decrease volume, turn the [Volume/Power] rotary knob counterclockwise.
  • Do not hold the radio close to your ear. If the volume is set to an uncomfortable level, it could hurt your ear.

Locking or Unlocking Keypad

To avoid accidentally changing radio settings:

  1. Press and hold the [*] key to lock the keypad until the screen displays the "🔒" icon.
  2. In lock mode, you can turn the intercom on and off, adjust the volume, receive, transmit, send call tones, send emergency alerts, and listen to channels. All other functions remain locked.
  3. In lock mode, press and hold the [*] key to unlock the keypad until the "🔒" icon is no longer displayed to unlock the radio.

4.2 Channel and Frequency Management

Keypad Entry

You can enter radio aliases, channel aliases, numbers, etc. using the radio's numeric keypad.

  1. To switch between input methods, press [# ↑ ] key.
  2. Press 1 to enter a special character (except in numeric input mode, where the number 1 is entered).
  3. Press 0 to enter a space (except in the numeric input mode, in which special characters are entered).

Select a Channel

The channel is the channel through which the signal is transmitted. Press the [V/M] button to toggle between VFO and channel mode to select channel mode. Press the ▲/▼ buttons or the rotary encoder to select the desired channel. Enter the channel number using the keypad. For example, to switch to channel 64, enter 064 totaling 3 digits to switch to channel 64.

Channel Memory

In Frequency and in Standby mode, you can store frequencies and parameters.

  1. Press [MENU] [3] [MENU] [1] [5], the screen will display “MEMCH”.
  2. Press [MENU] to enter the function. Press the ▲/▼ buttons to select the channel, then press [MENU] to store it. A sound tone will confirm the storing succeeded. Press [EXIT] to exit to return to standby mode.

NOTE:

If you want to set CTCSS tones, DCS codes or the frequency offset, you have to do it before storing the channel. Stored channels are displayed as CH-, other channels have no CH- display.

Delete a Channel (DEL-CH)

In VFO mode and in standby mode, press [MENU] [3] [MENU] [1] [6], the screen will display “DELCH”. Press [MENU] to enter the function. Press the ▲/▼ buttons or rotate the encoder to select the channel you want to delete, then press [MENU] to confirm. To return to the standby mode press [EXIT] key.

NOTE: Channel 1 cannot be deleted.

Main Band/Sub Band Switch

In standby mode, press the [A/B] key to toggle between the A and B bands to switch between the main/sub bands. The main band is the highlighted band. The darker displayed band is the sub-band.

VFO/Channel Switch

Press the [V/M] button to switch between VFO and channel display. VFO mode will display the ‘VFO' icon. MR mode will display the channel serial number.

Setting the VFO Frequency

Turn the radio to VFO mode, then press the [A/B] key to switch to the main channel.

  1. Input the VFO frequency directly with the keypad.
  2. Press the ▲/▼ button or rotary encoder to adjust the VFO frequency in the set frequency step.

4.3 Communication Functions

Call Service

All radios in the group must be set to the same channel and sub-code to communicate. To ensure optimal reception volume, keep the distance between the microphone and your mouth at 2.5 cm to 5 cm when transmitting.

  • Initiate a call: Select a channel, press and hold the [PTT-A] key, the radio transmits on segment A (upper screen) and the red indicator light is always on. Then speak into the microphone with normal voice tone. Press and hold the [PTT-B] key, the radio transmits on the B segment (lower screen), and the red indicator light is always on. Then speak into the microphone in a normal voice tone.
  • Receive a call: After releasing the [PTT] key, the radio is in a receivable state. When receiving a call, the green indicator light is always on.

Emergency Alarm

Emergency alarm means that the terminal can initiate an emergency alarm to seek help from the companion or the control center when it encounters an emergency. In standby mode, press the preset [SOS] key to enable or disable the emergency alarm function.

Flashlight

In standby mode, press the preset 💡 key to turn the flashlight on or off.

FM Radio Function

Set the [SK1] key to the radio function via Menu >> Radio Set >> Press SK1. Turn on the radio and press the SK1 key [FM Radio] to enter radio mode and the screen displays the tuning frequency. The following operations can be performed:

  • Press ▲/▼ key to search for radio channels at the preset step frequency.
  • Press the [# ↑ ] key to search for radio channels automatically, the screen displays 'SEEK...'
  • Press [EXIT] key to switch frequency band between 65.0/75.0MHz.
  • Press SK1 key [FM Radio] to exit radio mode.

Monitor

Press and hold the pre-programmed [Monitor] key to enter monitor mode and listen for weak signals on the current channel. You can also listen to the volume level of the radio when you are not receiving. This allows you to adjust the volume, if necessary. Release the [Monitor] key to exit the monitor mode.

Press the pre-programmed [SEARCH] key or press and hold 🔍 key, the radio enters into frequency search state, the screen displays "SEARCH...". Press [# ↑ ] key to switch the searching band, such as VHF/UHF, etc. The frequency and CTCSS/DCS code will be displayed after searching is completed. Press [MENU] to save the channel.

Reverse Frequency Function

Short press the [*] key in relay mode can invert the receive frequency and transmit frequency, the screen shows 'R' icon. This function is often used in repeater channels, and is effective when there is a frequency difference between the receive frequency and the transmit frequency.

Talk Around Function

In repeater mode, press [*] to switch between Talkaround Mode and Repeater Mode, the screen displays between ‘T' icon and 'R' icon. In Talkaround mode, the receive frequency is equal to the transmit frequency.

Repeater Activation Tone

Turn on the radio, press and hold the [PTT] key, then press the [SK1] to transmit 1750Hz audio to activate a repeater in hibernation.

Voice-activated transmit (VOX)

Enable VOX function, you don't need to press PTT key to transmit. Through the voice of normal speech, it automatically transmits, and after the speech stops, it will stop transmitting automatically and wait for receiving. VOX function is enabled:

  1. Standby status, press [MENU][2][MENU][4] to enter Vox Switch.
  2. Press [MENU][2][MENU][5] to enter Vox Level, press ▲/▼ to select VOX level (level 1-9);
  • Open VOX, select VOX level 1 level-9, the smaller the value, the higher the sensitivity, the 'V' icon is displayed at the top of the screen. Default is off.
  • Turn off VOX, select OFF OFF, V icon disappears.
  1. Press [MENU] key to save the setting and return to the upper menu.
  • Repeat the above operation and select OFF to turn off the VOX function.

Dual Watch

When in Dual watch mode, the radio can receive the frequency set for channel A or B. Operation is as follows:

  1. Press [MENU] [2] to enter Radio Set.
  2. Press [MENU] + ▲ to select "15 Dual Watch".
  3. Press [MENU] key to enter Dual Watch Setting, press ▲/▼ key to select “On”.
  4. Press [MENU] key to save and return to the upper menu. The dual watch function will be turned on, and the icon 'D' will be displayed on the first line of the screen.
  • Repeat the above operation and select "Off”, the Dual Watch function is turned off and the icon 'D' disappears from the first line of the screen. The sub-band displays the ▤ icon.

Stopwatch Function

Press and hold the [MENU] key to enable the stopwatch function. The stopwatch timing operates as follows:

  • Press the [MENU] key to start the stopwatch.
  • Press the [MENU] key again to stop the stopwatch.
  • Press the [EXIT] key to exit the stopwatch function.

Weather Radio/Scan Weather Channel

Your radio has a NOAA Weather Radio function, to enable the user to receive weather reports from designated NOAA stations. Your radio also has a NOAA Weather Scan function, to enable the user to scan all 10 channels of the NOAA Weather Radio.

  1. To turn the NOAA Weather Scan on, press and hold the [0] key for 3 seconds, ▤ icon appears. The radio will go to Weather band mode.
  2. Press and hold the [# ↑ ] key for 3 seconds to start automatic scanning of all 10 channels and stop on active channels. Pressing and holding the [# ↑ ] key for 3 seconds during a NOAA weather scan will stop the scan.
  3. After stopping NOAA weather scan, it is allowed to manually select the weather channel by press the ▲ or ▼ key.
  4. To exit the Weather Radio broadcast mode, press the ▤ key or [PTT] key.
Weather Channel Frequencies and Names
Channel NumberRX Frequency MHzChannel NumberRX Frequency MHz
CH-01162.550CH-06162.500
CH-02162.400CH-07162.525
CH-03162.475CH-08161.650
CH-04162.425CH-09161.775
CH-05162.450CH-10163.275

NOTE:

Weather Channels Wx 1 Thru 10, Receive-only channels for NOAA and Canadian weather broadcasts. You cannot transmit on these channels.

4.4 Menu Functions

Basic Use of Menu

Using the menu with arrow keys:

  1. Press the [MENU] button to enter the menu.
  2. Use the ▼/▲ buttons or the encoder to navigate between menu items.
  3. Once you find the desired menu item, press [MENU] again to select that menu item.
  4. Use the ▼/▲ buttons or the encoder to select the desired parameter.
  5. When you've selected the parameter you want to set for a given menu item;
  • A) To confirm your selection, press [MENU] and it will save your setting and bring you back to the main menu.
  • B) To cancel your changes, press [EXIT] and it will reset that menu item and bring you out of the menu entirely.
  1. To exit out of the menu at any time, press the [EXIT] button.

Using the Menu with Short-cuts

  1. Press the [MENU] button to enter the menu.
  2. Use the numerical keypad to enter the number of the menu item.
  3. To enter the menu item, press the [MENU] button.
  4. For entering the desired parameter you have two options:
  • A) Use the arrow buttons as we did in the previous section; or
  • B) Use the numerical keypad to enter the numerical short-cut code.
  1. And just as in the previous section;
  • A) To confirm your selection, press [MENU] and it will save your setting and bring you back to the main menu.
  • B) To cancel your changes, press [EXIT] and it will reset that menu item and bring you out of the menu entirely.
  1. To exit out of the menu at any time, press the [EXIT] button.

Wireless Program Radio

You can program the radio wirelessly using a smartphone app. Before programming, install the APP program by scanning the QR codes below:

QR code for iOS App

iOS App

QR code for Android App

Android App

The radio operates as follows:

  1. Press [MENU] + [4] to enter Wireless CPS.
  2. Press [MENU] + ▲/▼ to select "On"; The Bluetooth icon will be displayed on the first line of the screen.

After the APP is opened, allow the Bluetooth of the cell phone and open the location function, select the walkie-talkie model 5Rmini Series, connect the radio, click Walkie-talkie. A prompt will confirm connection success and return to the home page.

Wireless Copy Frequency

The one-click quick copy frequency feature allows the 5R MINI to search for another radio's transmission frequency and privacy code. Once found, press the menu to store the frequency. This enables two walkie-talkies to communicate normally without needing to manually program each other's frequencies.

Image illustrating the one-touch frequency pairing feature.

Figure 5: One-Touch Frequency Pairing

4.5 Shortcut Menu Operations

The radio features a comprehensive menu system accessible via shortcuts. Below is a summary of key menu items and their functions:

MenuNameSettingDescription
SCANFreq RangerNNNNnnnInput VFO range lower and upper frequency
Scan ModeTime, Carrier, SearchTime Operation - scanning will resume after a fixed time has passed. Carrier Operation - scanning will resume after the signal disappears. Search Operation - scanning will not resume.
Scan MemoryALL, DECODER, ENCODERRX_TX are saved (default is all, encoding and decoding are the same). Save only in Transmitter CTCSS/DCS. Save only in Receiver CTCSS/DCS.
Radio SettingStep2.5-100KSelects the amount of frequency change in VFO/Frequency mode when scanning or pressing the ▲ or ▼ keys.
SquelchOFF, LEVEL1-LEVEL5Squelch silences the receiver when there is no signal. Setting the squelch to 0 will open up the squelch entirely.
Power SaveOFF, ONTurn off radio sleep. The battery consumption is large, and the standby time may be shortened. Turn on radio sleep. Turning on is more power efficient, but you might miss the first few syllables before the RX turns on.
VOX SwitchOFF, ONTurn off the radio VOX. Turn on the radio VOX.
VOX LevelLEVEL1-LEVEL9When enabled it is not necessary to push the [PTT] button on the transceiver. Adjust the gain level to an appropriate sensitivity to allow smooth transmission.
VOX Delay0.5......2.0sWhen the VOX is enabled, set up the VOX delay to help to extend the transmission time to avoid stopping a transmission too early. 0.5s-2s, Step 0.1 second. a total of 16 times offered.
TOT15;30;45...180Maximum allowed time for transmission while holding down the PTT key.
TOAOFF, 1......10Disable TOA function. Activate TOA function. Range 0 – 10 seconds, Step 1 second.
VoiceOFF, ONDisable voice prompts. Activate voice prompts.
LanguageChinese, EnglishDisplay menus and voice prompts in Chinese language. Display menus and voice prompts in English language.
ROGEROFF, BEEP, TONE 1200Disable ROGER function. Release PTT key without ROGER audio. Activate the ROGER function. Sends an end-of-transmission tone to indicate to other stations that the transmission has ended. Activates the ROGER function. Sends the DMC1200 transmission end tone to indicate to other stations that the transmission has ended.
BeepOFF, ONDisable key confirmation tone. Activation key to confirm tone. Allows audible confirmation of a key press.
BackLightALWAYS ON, 5......20The backlight is always on. Set the backlight off time in no-operation delay time. 5-20, step value is 5.
Power onPICTUREShow preset picture when radio is on.
Dual WatchOFF, ONDisplay battery voltage when radio is on. Disable dual table, dual receive. Monitor [A] and [B] at the same time. The display with the most recent activity ([A] or [B]) becomes the selected display.
AutoLockOFF, ONDisable automatic keypad lock. Allow manual keypad lock (press and hold the * key to lock/unlock the keyboard). When ON, the keypad will be locked if not used in 8 seconds. Pressing the * key for 2 seconds will unlock the keypad.
Alarm ModeOn Site, Send Sound, Send CodeSounds alarm through your radio speaker only. Transmits a cycling tone over-the-air. Transmits '119' (911 in reverse) followed by the ANI code over-the-air.
Alarm ToneOFF, ONThe radio speaker blocks the alarm sound. The radio speaker sounds an alarm.
ANI-Edit100View the ANI ID, and if necessary, will allow to change the ANI ID.
Display ANIOFF, ONDisable the ANI code display function. Enable ANI code display.
DTMF-STOFF, DT-ST, ANI-ST, DT+ANINo DTMF Side Tones are heard. Side Tones are heard only from manually keyed DTMF codes. Side Tones are heard only from automatically keyed DTMF codes. All DTMF Side Tones are heard.
PTT-IDOFF, BOT, EOT, BOTHNo ID is sent. The selected S-CODE is sent at the beginning. The selected S-CODE is sent at the ending. The selected S-CODE is sent at the beginning and ending.
ALERT1000Hz, 1450Hz, 1750Hz, 2100HzThe following configurations will transmit accordingly: PTT + SK1 = Transmits 1000Hz Tone Burst, PTT + SK1 = Transmits 1450Hz Tone Burst, PTT + SK1 = Transmits 1750Hz Tone Burst, PTT + SK1 = Transmits 2100Hz Tone Burst.
TAILOFF, ONDisable Squelch Tail Elimination. Enable Squelch tail elimination. to prevent any squelch tails from being heard.
Press SK1FM Radio, SCAN, SEARCH, VOX, LAMP, SOSFM Radio on/off. SCA on/off. Search on/off. VOX on/off. Flashlight on/off. SOS on/off.
ResetVFO MODE, RESET ALLReset the radio's VFO menu to factory defaults (no reset for bank, scan settings). Resets the radio to factory defaults, with some exceptions.
Program ChannelCH.NAMEChannel 1View channel name, allows to rename the current channel. Press the #z key to switch the input method, allowing the input of letters, numbers and symbols.
RX FrequencyView the current channel Receiver frequency.
TX FrequencyView the current channel Transmitter frequency.
Trans PowerHigh, LowSelects between HIGH transmitter power when in VFO/Frequency mode. Selects between LOW transmitter power when in VFO/Frequency mode.
BandwidthWide, NarrowWideband (25 kHz bandwidth). Narrowband (12.5 kHz bandwidth).
RX CTCSSOFF;67-254.1Mutes the speaker of the transceiver in the absence of a specific and continuous sub-audible signal. If the station you are listening to does not transmit this specific and continuous signal, you will not hear anything.
RX DCSOFF;023N-7541Mutes the speaker of the transceiver in the absence of a specific low-level digital signal. If the station you are listening to does not transmit this specific signal, you will not hear anything.
TX CTCSSOFF;67-254Transmits a specific and continuous sub audible signal to unlock the squelch of a distant receiver (usually a repeater).
TX DCSOFF;023N-7541Transmits a specific low-level digital signal to unlock the squelch of a distant receiver (usually a repeater).
EncryptionOFF, ONDisable encrypted mode, your conversations are not private. Activating encryption mode ensures the privacy of your conversations. To use the Encryption function, the other part of the radio must also have Encryption activated and must be tuned on the same DCS code.
Signaling1-20Selects 1 of 20 DTMF codes. The DTMF codes are programmed with software and are up to 3 digits each.
CH-MDFNAME, FREQ, CHMR/Channel mode is displayed in NAME format. Note: NAME allows CPS program or edit in the channel name (Munu 1). MR/Channel mode is displayed in frequency format. MR/Channel mode is displayed in CH format.
SP-MuteQT, QT+DTMFWhen radios is set in this mode, the monitor feature is activated only when the radio receives the correct CTCSS/DCS. With this option, the monitor is activated when the radio receives the correct CTCSS/DCS and the correct DTMF code.
Wireless CPSOFF, ONTurn off Wireless CPS and disable the Wireless programming function. Enable Wireless CPS to program the radio via Wireless.
Radio InfoRadio ID\Firmware\HardwareDisplays radio ID, firmware version, hardware version. to check the radio information.

5. Maintenance

Your Two Way Radio is an electronic product of exact design and should be treated with care. The suggestions below will help you to fulfill any warranty obligations and to enjoy this product for many years.

5.1 General Care

  • Do not attempt to open the radio for any reason! The radio's precision mechanics and electronics require experience and specialized equipment; for the same reason, the radio should under no circumstances be realigned as it has already been calibrated for maximum performance. Unauthorized opening of the transceiver will void the warranty.
  • Do not store the Radio under direct sunshine or in hot areas.
  • High temperatures can shorten the life of electronic devices, and warp or melt certain plastics.
  • Do not store the radio in dusty and dirty areas.
  • Keep the Radio dry. Rainwater or damp will corrode electronic circuits.
  • If it appears that the Radio diffuses peculiar smell or smoke, please shut off its power immediately and take off the charger or battery from the radio.
  • Do not transmit without antenna.

5.2 Battery Maintenance

Charging Prohibitions

To protect you against any property loss, bodily injury or even death, be sure to observe the following safety instructions:

  1. Do not charge or replace your battery in a location containing fuels, chemicals, explosive atmospheres and other flammable or explosive materials.
  2. Do not charge your battery that is wet. Please dry it with a soft and clean cloth prior to charge.
  3. Do not charge your battery suffering deformation, leakage and overheat.
  4. Do not charge your battery with an unauthorized charger.
  5. Do not charge your battery in a location where strong radiation is present.
  6. Overcharge shall always be prohibited for it may shorten the life of your battery.

Battery Maintenance Instructions

To help your battery work normally or prolong its life, be sure to observe the following instructions:

  1. Accumulated dust on charging connector may affect normal charging. Please use a clean and dry cloth to wipe it on a regular basis.
  2. It is recommended to charge the battery under 5°C~40°C. Violation of the said limit may cause battery life reduction or even battery leakage.
  3. To charge a battery attached to the product, turn it off to ensure a full charge.
  4. Do not remove the battery or unplug the power cord during charging to ensure a smooth charging process.
  5. Do not dispose of the battery in fire.
  6. Do not expose the battery to direct sunlight for a long time nor place it close to other heating sources.
  7. Do not squeeze and penetrate the battery, nor remove its housing.

6. Troubleshooting

  • No Power: Ensure the battery is properly installed and charged. Turn the Volume/Power knob clockwise to power on.
  • No Transmission/Reception: Check if the antenna is securely attached. Verify that the radio is on the correct channel and frequency. Ensure the PTT button is fully pressed during transmission.
  • Poor Audio Quality: Adjust the volume. Check for obstructions between radios. Ensure the microphone is 2.5-5 cm from your mouth during transmission.
  • Keypad Unresponsive: Check if the keypad lock is enabled (look for the "🔒" icon). Press and hold the [*] key to unlock.
  • Radio Overheating: Continuous transmission for a long time may lead to heat accumulation. Allow the radio to cool down in a proper location.
  • Unusual Smell or Smoke: Immediately shut off the radio, remove the charger or battery, and discontinue use. Contact support if this occurs.
  • Programming Issues: If using wireless programming, ensure Bluetooth is enabled on your phone and the location function is active for the app.

7. Specifications

7.1 General Specifications

AttributeValue
Brand NameBAOFENG
Model Number5R MINI
Walkie Talkie TypeMINI Walkie Talkie
MaterialPlastic
Dimensions107*52*37mm (without antenna)
Weight200g (Battery pack included)
Is DisplayYes (1.44" TFT Large screen)
Waterproof / Water-ResistantNo
Battery IncludedYes
Battery Capacity1600mAh
Operation VoltageDC 7.4 V ±10%
Connection for accessories2 pin Kenwood jack
Antenna impedance50 Ohm

7.2 Performance Specifications

AttributeValue
Frequency Range (RX)FM 65-108 MHz, AM 108-136 MHz, VHF 136-174 MHz, UHF 350-390 MHz, UHF 400-520 MHz
Frequency Range (TX)VHF 144-148 MHz, UHF 420-450 MHz
Output Power (w)5W-10W (Adjustable 5W/2W RF output)
Maximum Range5km-10km
Storage Channel999 Groups
Channel Spacing25.0KHz (Wide)/12.5KHz (Narrow)
Receive Sensitivity0.25μV (12dB SINAD)
Rated Audio Power Output1W @16 ohms
Transmission current≤1600mA
Receive current≤380mA

NOTE:

All specifications may be modified without prior notice or liability.

8. User Tips

  • Screen Visibility: The screen visibility outdoors may not be optimal; pressing a button can help improve clarity.
  • Antenna Performance: The included antenna is shorter than some standard models. For extended range, consider upgrading to a longer antenna (e.g., Baofeng BF-701pro).
  • Belt Clip Removal: The belt clip can be difficult to remove once attached due to its design. Exercise caution when attaching or removing.
  • Bluetooth Programming: Utilize the built-in Bluetooth for easy programming via the 'Walkie-talkietool' app on your smartphone. This simplifies frequency customization.
  • USB-C Charging: Take advantage of the convenient USB-C charging feature, allowing you to charge the radio with common chargers like those for phones, power banks, or laptops.
  • Menu Navigation: The menu system is designed to be intuitive, offering a more convenient experience compared to some older models.

9. Regulatory Conformance & Disclaimer

9.1 EU Regulatory Conformance

As certified by the qualified laboratory, the product is in compliance with the essential requirements and other relevant provisions of the Directive 1999/5/EC (2014/53/EU). All applicable EU regulations are regarded (2006/66/EC, 2011/65/EU, 2012/19/EU). This information is applicable to EU countries only.

9.2 FCC Part15/IC Compliance

FCC Part 15 Compliance

This device complies with Part 15 of the FCC rules. Operation is subjected to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.

IC Compliance

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.

FCC RF Exposure

WARNING!

It is up to the user to properly operate this radio transmitter to insure safe operation. Please adhere to the following:

  • Do not use the radio with a damaged antenna. If a damaged antenna comes into contact with the skin, a minor burn may result.
  • Please contact your local dealer for a replacement antenna.
Hand-Held Operation (Held-to-Face)

This device was evaluated for typical hand-held (held-to-face) operations with a 1 inch spacing from the front of the radio. For hand-held operation, the radio should be held 1 inch from the user's face in order to comply with FCC RF exposure requirements.

Body-Worn Operation

This device was evaluated for body-worn operations with the supplied belt-clip accessory. (All necessary accessories are included in the package; any additional or optional accessories are not required for compliance with the guidelines.) Third party accessories (unless approved by the manufacturer) should be avoided as these might not comply with FCC RF exposure guidelines.

9.3 Disclaimer

The accuracy and completeness of the contents are sought in the process of compilation, but we do not bear any responsibility for possible errors or omissions. With the continuous development of technology, we reserve the right to change the design and specification of the product without notice. No copy, modification, translation and dissemination of this handbook may be made in any form without the prior written authorization of our department.

FCC, Recycle, and WEEE symbols indicating compliance and proper disposal.

Figure 6: Compliance and Disposal Symbols

For a detailed user manual, please refer to the official PDF document: User manual (PDF)

10. Product Video

Video 1: BAOFENG 5R Mini FM Handheld Transceiver Overview. This video highlights key features such as dual PTT, one-press frequency capture, clear signals, compact size, smart knob control, universal USB-C charging, and multi-band capabilities.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.