King Kong X7pro

Contents

KING KONG X7pro LED Bicycle Light Instruction Manual

Model: X7pro | Brand: King Kong

Introduction

Thank you for choosing the KING KONG X7pro LED Bicycle Light. This manual provides essential information for the safe and efficient use of your new bicycle light. The X7pro is designed to enhance your cycling safety with its powerful illumination, intelligent features, and durable construction. It features a clear cut-off line to prevent glare, a USB rechargeable 5000mAh battery that doubles as a power bank, and an IPX5 waterproof rating.

KING KONG X7pro 1500LM Bicycle Light with 5000mAh reverse charging capability
Figure 1: KING KONG X7pro 1500LM Bicycle Light

Setup

Package Contents

Ensure all items are present:

  • KING KONG X7pro LED Bicycle Light
  • Mounting Bracket
  • USB Type-C Charging Cable
  • GoPro Conversion Mount (if included with your model)
  • Bandage/Strap (if included with your model)

Installation of the Mounting Bracket

The X7pro light is designed for formal installation and easy lifting/removal from its mount.

  1. Attach the mounting bracket to your bicycle handlebar. Ensure it is securely fastened.
  2. Use the provided screw and tool to firmly attach the light's base to the mounting bracket.
  3. Slide the X7pro bicycle light onto the mounted base until it clicks into place.
  4. To remove the light, press the release tab and slide the light off the mount.
Diagram showing formal installation and lifting of the light from the mount
Figure 2: Formal Installation and Lifting
Diagram showing the light being attached to the mounting bracket with a screw
Figure 3: Attaching the light to the mount with a screw
Diagram showing the light being slid into the mount
Figure 4: Sliding the light into the mount
Diagram showing the light mounted on a bicycle handlebar
Figure 5: Light mounted on a bicycle handlebar
Diagram showing the light being removed from the mount
Figure 6: Removing the light from the mount

Operating Instructions

Power On/Off and Mode Selection

  • **Power Button**: Use the main power button on the light to turn it on and off.
  • **Mode Cycling**: Short press the power button to cycle through the constant-on brightness modes (High, Medium, Low).
  • **Flashing Mode**: With the lamp turned off, hold down the power-on button for five seconds to enter the five-mode setting. This includes two flashing modes and three constant-on modes.

Remote Control Usage

The remote control is factory-matched. For energy saving, the lamp is designed to be turned on first using the main power button, and then can be turned off using the remote control's power-off button. The lamp can be turned on and off freely with the remote within two hours of standby.

  • **Remote Control Matching**:
    1. With the lamp turned on, quickly press the main switch three times.
    2. The indicator light on the lamp will turn yellow.
    3. Then, press the wireless remote control's power-on button once to complete the pairing.

Smart Mode

The X7pro features an intelligent Smart Mode:

  • **Automatic Shut-off**: Double-click to activate Smart Mode. It will automatically turn off after 20 seconds of stopping riding.
  • **Automatic On**: When movement is detected, the light will automatically turn back on.
  • **Low Battery Adjustment**: When the battery is low, the Smart Mode automatically switches to a lower gear (brightness) to increase battery life.
Diagram explaining Smart Mode logic and comparing X7PRO optical lights with ordinary car lights
Figure 7: Smart Mode Logic and Light Beam Comparison

Light Beam and Visibility

The X7pro is designed with professional optics to provide a clear cut-off line, preventing glare for oncoming traffic while ensuring wide and effective illumination for the rider.

Diagram illustrating the bicycle headlight's professional optics with a clear cut-off line, low beam spot, and road paving simulation
Figure 8: Professional Optics for Clear Cut-off Line
Image demonstrating wider light coverage (50m) and battery/brightness indicators
Figure 9: Wider Light Coverage and Indicators

The light provides a broad beam, offering up to 50% wider coverage for total visibility, illuminating up to 50 meters ahead.

Indicators

The light features both a battery indicator and a brightness indicator:

  • **Battery Indicator**: Shows remaining battery life (e.g., 100%-30%, 30%-10%, 10%-0%).
  • **Brightness Indicator**: Shows current brightness level (High, Middle, Low, Flashing).

Charging and Power Bank Function

The X7pro is equipped with a 5000mAh lithium battery and supports USB Type-C charging.

  • **Charging the Light**: Connect the provided USB Type-C cable to the light's charging port and a suitable USB power source (e.g., wall adapter, computer USB port).
  • **Power Bank Function**: The light can also act as a power bank, allowing you to charge other devices (like your smartphone) on the go. Connect your device to the light using a compatible USB cable.
Image showing the X7pro light charging a smartphone, highlighting its power bank function
Figure 10: X7pro functioning as a power bank

Maintenance

  • **Cleaning**: Wipe the light and lens with a soft, damp cloth. Do not use abrasive cleaners or solvents.
  • **Storage**: Store the light in a cool, dry place when not in use. For long-term storage, ensure the battery is partially charged (around 50-70%) and recharge it every few months to maintain battery health.
  • **Water Resistance**: The light is IPX5 waterproof and dustproof, meaning it can withstand splashes and light rain. Do not submerge it in water.
Image highlighting IPX5 waterproof and dustproof rating, secure mounting, and high-efficiency optical lens, with dimensions
Figure 11: IPX5 Waterproof and Dustproof Design

Troubleshooting

ProblemPossible CauseSolution
Light does not turn on.Low battery or power button not pressed correctly.Charge the battery. Ensure the power button is pressed firmly.
Remote control not working.Remote not paired or out of range.Re-pair the remote control (see "Remote Control Matching" in Operating Instructions). Ensure remote is within effective range.
Light gets hot during use.Normal operation for high-power LED lights. Intelligent temperature control is active.This is normal. The light has an intelligent NTC temperature control system that automatically reduces brightness at 52°C to cool down. Brightness will return once temperature drops. If using remote, temperature control may be temporarily overridden for 1 minute.
Light output seems lower than expected.Battery low, temperature control active, or incorrect mode selected.Charge the battery. Check if the light is in a lower brightness mode. Allow the light to cool if it has been running at high brightness for an extended period.

Specifications

FeatureDetail
Model NumberX7pro
Brand NameKing Kong
TypeHEADLIGHTS
Lumen Output1000-1500 Lumen (depending on model variant)
Power SupplyBattery (5000mAh Lithium)
Mounting PlacementHandlebar
Body MaterialAluminum alloy
Waterproof LevelIPX5
Intelligent SensingYes
Support Dimmer2 - 4 Files (modes)
CertificationCE, RoHS
Dimensions (approx.)106mm x 31mm x 32mm (for 800LM/2600mAh variant)
Weight (approx.)119g (for 800LM/2600mAh variant)

User Tips

  • The X7pro light offers excellent illumination and can also serve as a convenient power bank for your mobile devices.
  • Even on the Low brightness setting, the light provides sufficient illumination for many riding conditions, helping to conserve battery life.
  • The robust aluminum alloy construction ensures durability, though some users note it can feel somewhat heavy.
  • The light's wide range and good light distribution contribute to enhanced visibility and safety during night rides.

Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the seller's official channels or contact customer support. Keep your proof of purchase for any warranty claims.

Video Demonstration

Video 1: Product demonstration showing installation, light patterns, and usage scenarios.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.