1. Safety Information
- Warning: Not suitable for children under 36 months due to small parts. Adult supervision is required.
- Always operate the vehicle in a safe, open area away from people, pets, and obstacles.
- Do not operate near water or in wet conditions to prevent damage to electronics.
- Ensure all batteries are correctly installed and charged before use.
- Turn off the vehicle and remote control when not in use.
2. Package Contents
Please inspect the package contents to ensure all items are present and undamaged.
- MN82T 1/12 4WD Remote Control Tow Truck
- Remote Control Transmitter
- 7.4V 1200mAh Lithium Battery (18650 type)
- USB Charging Cable
- Metal Shafts (upgrade parts)
- Original Box (for storage and transport)

3. Setup Guide
3.1. Battery Installation & Charging
- Vehicle Battery: The MN82T uses a 7.4V 1200mAh 18650 lithium battery. Ensure the battery is fully charged before first use. Connect the battery to the included USB charging cable and plug it into a suitable USB power source (e.g., computer, USB wall adapter). The charging indicator will show the charging status (refer to charger instructions for specific light patterns).
- Remote Control Batteries: Install the required batteries (typically AA, not specified in data, assume standard) into the remote control transmitter. Ensure correct polarity.
3.2. Initial Pairing (Binding)
The vehicle and remote control are usually pre-paired from the factory. If re-pairing is needed:
- Turn on the remote control.
- Turn on the vehicle.
- The remote control and vehicle should automatically connect. If not, refer to the detailed PDF user manual for specific binding instructions.

4. Operating Instructions
4.1. Remote Control Functions

- Proportional Throttle: Controls forward and reverse speed with precision.
- Proportional Steering: Allows for delicate and realistic steering control.
- Steering Trim: Adjusts the steering to ensure the vehicle drives straight when the steering wheel is centered.
- Speed Adjustment: Allows you to set the maximum speed, suitable for different skill levels and terrains.
- Lighting Control: Activates and controls the vehicle's headlights, brake lights, turn signals, and reverse lights.
- Hook Ascending/Descending: Controls the simulated crane's lifting and lowering functions.
- Power Switch: Turns the remote control on/off.
4.2. Driving the Vehicle
The MN82T is an all-terrain off-road pickup designed for rugged environments. It features 4x4 mid-drive for powerful performance.
- Use the proportional throttle for smooth acceleration and deceleration.
- Steer with the proportional steering wheel for precise control.
- Adjust the driving speed according to your proficiency and the terrain.
- The vehicle is equipped with vacuum wear-resistant and slip-resistant tires for stability on various surfaces, including rugged, muddy, and sandy conditions.

4.3. Crane Operation
The MN82T features a simulation controllable crane with remote lifting and lowering capabilities.
- Use the dedicated hook ascending/descending control on the remote to operate the crane.
- The boom's lifting range is adjustable.
- The lifting rope can be adjusted remotely for precise positioning.
- The metal hook is designed for durability.

4.4. Lighting System
The vehicle is equipped with a comprehensive lighting system for enhanced realism and visibility.
- Controllable Headlamps: Provide guidance in low-light conditions.
- Controllable Tail Lights: Enhance visibility from the rear.
- Brake Lights: Illuminate when braking.
- Reverse Lights: Activate when the vehicle is moving in reverse.
- Front and Rear Hazard Lights/Turn Signals: Indicate turns or hazards.

4.5. Functional Details
The MN82T includes several realistic and functional details:
- Openable Hood: Reveals a simulated engine compartment.
- Simulation Interior: Detailed cabin for enhanced realism.
- Simulated Rearview Mirrors: Adds to the authentic appearance.
- Rear Canopy: The rear canopy features openable compartments for storage, and can hold a spare tire.
5. Maintenance
5.1. General Cleaning
- After each use, especially in dusty or dirty conditions, gently wipe down the vehicle with a soft, dry cloth.
- Avoid using water or chemical cleaners directly on electronic components.
- Remove any debris from the wheels, suspension, and chassis.
5.2. Battery Care
- Always fully charge the lithium battery before storage if it will not be used for an extended period.
- Do not overcharge or over-discharge the battery.
- Store batteries in a cool, dry place away from direct sunlight and extreme temperatures.
- If the battery shows signs of swelling or damage, discontinue use immediately and dispose of it properly.
5.3. Inspection
- Regularly check for loose screws or connections, especially after rough play.
- Inspect the tires for wear and tear. The vacuum wear-resistant tires are designed for durability, but extreme conditions can still cause damage.
- Ensure the suspension components (independent shock absorbers, steel plate suspension) are free of obstructions and functioning correctly.
6. Troubleshooting
- Vehicle Not Responding:
- Check if both the vehicle and remote control are powered on.
- Ensure batteries in both the vehicle and remote control are fully charged.
- Verify that the vehicle and remote control are properly paired.
- Poor Range or Intermittent Control:
- Ensure there are no strong interference sources (e.g., Wi-Fi routers, other RC devices) nearby.
- Check the remote control batteries.
- Ensure the vehicle's antenna (if visible) is not obstructed or damaged. The remote distance is up to 50m.
- Vehicle Not Moving Straight:
- Adjust the steering trim on the remote control.
- Inspect the steering mechanism for any damage or obstructions.
- Crane Not Operating:
- Check if the vehicle is powered on and the remote control is connected.
- Ensure no physical obstructions are preventing the crane's movement.
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | MN-82T |
| Brand Name | MENGXI |
| Scale | 1:12 |
| Type | Truck (Remote Control) |
| Material | Metal, Plastic |
| State of Assembly | Ready-to-Go |
| Vehicle Size (L x W x H) | 37cm x 15cm x 16cm |
| Driving Speed | 6 km/h |
| Remote Distance | 2.4G / 50m |
| Play Time (Flight Time) | Approx. 45 minutes |
| Body Battery | 7.4V 1200mAh Lithium battery (18650 type) |
| Is Batteries Included | Yes |
| Motor | 280 Strong Magnetic Motor |
| Steering Gear | 17g Waterproof Servo Motor |
| Steering Angle | ≤ 30° |
| Climbing Performance | ≤ 45° slope |
| Drive System | 4x4 Mid-drive |
| Controller Mode | MODE1, MODE2 |
| Lighting Configuration | Headlights, Brake Lights, Turn Signals, Reversing Lights |
| Traction Weight | 3kg |
| Loading Capacity | 3kg |
| Tire Diameter | 62mm |
| Tire Width | 24mm |
| Wheel Diameter | 37mm |
| Adapter | 5mm |
| Recommended Age | 14+y |
| Certification | CE |
| Origin | Mainland China |

8. User Tips
- For optimal off-road performance, ensure the tires are clean and free of debris.
- Experiment with the speed adjustment feature to find the perfect balance between control and excitement for different terrains.
- Utilize the crane's remote adjustment features for creative play scenarios, such as lifting small objects or assisting other RC vehicles.
- The independent shock absorbers and steel plate suspension are designed for rugged terrain; observe how they perform on various surfaces.
9. Warranty and Support
9.1. Warranty Information
This product comes with a 30-day warranty from the date of purchase. The warranty covers manufacturing defects and malfunctions under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper maintenance.
9.2. Additional Support
For further assistance, detailed diagrams, or specific troubleshooting steps, please refer to the official user manual PDF available for download. You can find it at the following link: MN82T User Manual (PDF)