SEMBO BLOCK Progenitor Effect Volume 2

Contents

SEMBO BLOCK MOSHOW Progenitor Effect Building Blocks Volume 2

Model: Progenitor Effect Volume 2

Brand: SEMBO BLOCK

1. Introduction

Thank you for choosing the SEMBO BLOCK MOSHOW Progenitor Effect Building Blocks Volume 2. This product features highly detailed, movable models such as Takeda Shingen and Bontenmaru, designed for both budding builders and collectors. Crafted from high-quality ABS plastic, these micro building blocks offer a rewarding assembly experience and a high level of detail, providing excellent value compared to larger, more expensive kits.

2. Safety Warnings

  • WARNING: DO NOT SWALLOW. This product contains small parts and is not suitable for children under 3 years old due to choking hazards.
  • The smooth surface and circular design of the blocks are intended to ensure the safety of children during play.
  • California Proposition 65 Warning: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

3. Package Contents

Each SEMBO BLOCK MOSHOW Progenitor Effect Volume 2 kit typically includes the following items:

  • Main Body (x1)
  • Instruction Manual (x1)
  • Character Card (x1)
  • Display Base (x1)
  • Assorted Weapon Accessories (specific to model variant)

Weapon accessories may include:

  • Single-blade Axe Form (1 PCS)
  • Double-blade Axe Form (1 PCS)
  • Katana (2 PCS)
  • Detachable Beam Assault Rifle (1 PCS)
  • Battle Axe - Genzaemon (1 PCS)
  • Cross Spear (1 PCS)
Contents of one model kit: main body, instruction manual, character card, and display base.
Figure 3.1: Typical kit contents.
Weapon accessories for the red Takeda Shingen model, including axes and katanas.
Figure 3.2: Example weapon accessories.

4. Assembly Instructions

The SEMBO BLOCK MOSHOW models are designed for simple and straightforward assembly. Please follow the detailed diagrams provided in the included instruction manual for your specific model variant.

General Assembly Steps:

  1. Unpack Components: Carefully remove all parts from the packaging.
  2. Identify Parts: Refer to the parts list in your instruction manual to identify all components.
  3. Follow Diagrams: Assemble the model step-by-step according to the visual instructions. Pay close attention to the orientation of each piece.
  4. Attach Weapons/Accessories: Once the main body is assembled, attach any desired weapon or accessory pieces.
  5. Mount on Base: Secure the assembled model onto the provided display base.
Disassembled parts of the red Takeda Shingen model, illustrating simple assembly.
Figure 4.1: Example of disassembled parts for easy assembly.

Articulation and Posing:

These models feature a highly articulated internal skeleton, allowing for dynamic posing. The main body boasts 25 points of super articulation, including multiple ball joints. Arms can be raised over 130 degrees, and the thigh, calf, and foot sections are designed for separation to achieve various lower limb poses.

Diagram showing 25 points of articulation on the model's internal skeleton and assembled figure.
Figure 4.2: Articulation points for dynamic posing.

5. Operating Features

Once assembled, your SEMBO BLOCK MOSHOW model is ready for display and posing. The advanced articulation allows for a wide range of dynamic stances. You can also interchange certain weapon accessories to customize your model's appearance and combat readiness.

Diagram illustrating interchangeable forms of the axe weapon.
Figure 5.1: Example of interchangeable weapon forms.

6. Maintenance

To keep your model in excellent condition:

  • Cleaning: Use a soft, dry cloth to gently wipe away dust. For stubborn dirt, a slightly damp cloth can be used, followed by immediate drying. Avoid harsh chemicals or abrasive cleaners.
  • Storage: Store the model away from direct sunlight and extreme temperatures to prevent material degradation or discoloration.
  • Handling: Handle the model carefully, especially when posing, to avoid stressing joints or detaching parts.

7. Troubleshooting

Missing Parts:

If any parts are found missing after receiving the package, please contact customer support immediately for assistance.

Size Inaccuracy:

Please note that due to manual measurement, the size of the product may have an inaccuracy of up to 2 cm / 1 inch. This is within expected manufacturing tolerances.

8. Specifications

FeatureDetail
Product NameProgenitor Effect - Heavenly Flow Class - Regular Version - Second Bullet
Item Number900020
MaterialHigh-quality ABS Plastic
Block SizeSmall building block (Compatible with Lego)
Plastic Block ShapeIrregular Shape
Plastic TypeABS
CertificationCE
GenderUnisex
Recommended Age14+ years, 18+ years
WarningDO NOT SWALLOW
OriginMainland China
ThemeTECHNICAL
Educational ObjectiveCreative Thinking, Cognitive Flexibility, Imagination Development
Model Number0
Package Dimensions72mm x 72mm x 120mm
Display Box Dimensions222mm x 152mm x 125mm
Packing Quantity72 boxes
Display Box Specification6 boxes / set box
Barcode6941827011630
Product information table including product name, item number, package dimensions, and quantity.
Figure 8.1: Product information details.

9. User Tips

  • Enhance Skills: Engaging with these building blocks can help improve overall and refined motor skills, spatial awareness, and storytelling abilities.
  • Creative Posing: Experiment with the model's numerous articulation points to create unique and dynamic display poses.
  • Collect and Display: These models are perfect for collectors, offering high detail and an impressive display piece.

10. Warranty and Support

While specific warranty details are not provided, if you encounter any issues such as missing parts upon receiving your package, please contact the seller immediately for assistance. Ensure you retain your proof of purchase for any support inquiries.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.