HelloRadio VG01

Contents

HelloRadio VG01 CNC Aluminum Hall Gimbal Stabilizer User Manual

For V16, V14 Remote Controllers & Compatible with T18, TX16, BOXER

1. Introduction

The HelloRadio VG01 is a high-precision CNC Aluminum Hall Gimbal Stabilizer designed as an upgrade or replacement part for various remote controllers, including HelloRadio V16, V14, and compatible models like T18, TX16, and BOXER. Featuring aviation-grade CNC material and an elastic high-precision Hall sensor, this gimbal provides real-time, delay-free control for enhanced responsiveness and durability. This manual provides essential information for the setup, operation, maintenance, and troubleshooting of your VG01 gimbal.

HelloRadio VG01 CNC Metal Gimbal in packaging with accessories

Figure 1: HelloRadio VG01 CNC Metal Gimbal with included accessories.

2. Setup and Installation

2.1 Physical Installation

The HelloRadio VG01 gimbal is a component designed to be installed inside a compatible remote controller. Installation typically involves disassembling your remote controller, removing existing gimbals, and connecting the VG01. Due to the variety of remote controller designs, specific disassembly and wiring instructions are beyond the scope of this manual. Please refer to your remote controller's official user manual or manufacturer's guidelines for detailed steps on how to safely open your device and replace its gimbals.

  • Ensure the remote controller is powered off and batteries are removed before beginning installation.
  • Handle electronic components with care to avoid static discharge.
  • Note the orientation and wiring of the original gimbals before removal to ensure correct installation of the VG01.

2.2 Gimbal Adjustments

The VG01 gimbal offers several adjustment points to customize its feel and response. Refer to the diagram below for the location of adjustment screws.

Diagram showing VG01 gimbal dimensions and numbered adjustment points

Figure 2: VG01 Gimbal Specifications and Adjustment Features.

Adjustment Points Explained:

  1. Left and Right Spring Tension (Point 1):
    • Turn the screw socket clockwise to reduce left and right spring tension.
    • Turn the screw socket counter-clockwise to increase left and right spring tension.
  2. Up and Down Spring Tension (Point 2):
    • Turn the screw clockwise to reduce up and down spring tension.
    • Turn the screw counter-clockwise to increase up and down spring tension.
  3. Centering and Mode Adjustment (Point 3):
    • Turning the screw clockwise (to raise the arm) will disable the gimbal's auto-centering on its up and down axis when the stick is released (suitable for throttle control).
    • Turning the screw counter-clockwise (to lower the arm) will enable the gimbal to auto-center on its up and down axis when the stick is released.
    • Screw ⑥ can also be used to fine-tune arm height for centering.
  4. Stick Tension Adjustment (Point 4):
    • When there is no up and down tension, screw ⑤ adjusts the overall tension tightness.
    • Screw ④ adjusts the scale tightness (fine-tuning the feel of the stick movement).

Note: The physical orientation of the gimbal may be rotated 180 degrees from the diagram depending on your specific transmitter installation requirements.

3. Operating the Gimbal

Once installed and properly adjusted, the HelloRadio VG01 gimbal operates as an integral part of your remote controller. Its primary function is to translate your physical stick movements into precise electronic signals for controlling your drone or other RC models.

  • Precision Control: The aviation-grade CNC material and high-precision Hall sensor ensure smooth, accurate, and repeatable control inputs.
  • Real-time Response: The gimbal provides real-time linear response without delay, crucial for sensitive maneuvers and competitive flying.
  • Durable Design: The STICKY 360 joystick head is designed for anti-slip performance, ensuring a firm grip and long-lasting durability.
Features of VG01 Precision Hall sensor and STICKY 360 joystick head

Figure 3: Key features of the VG01 gimbal, highlighting precision and durability.

4. Maintenance

Proper maintenance ensures the longevity and optimal performance of your HelloRadio VG01 gimbal.

  • Protection: Protect the remote controller (and thus the installed gimbal) from water, excessive drops, and undue pressure.
  • Cleaning: Keep the gimbal area clean. Gently wipe away dust or debris from the joystick mechanism using a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
  • Avoid Impact: Prevent collisions or scratches to the joystick head and internal components.
  • Storage: When not in use for extended periods, store your remote controller in a dry, cool place, away from direct sunlight and extreme temperatures.

5. Troubleshooting

If you encounter issues with your gimbal, consider the following troubleshooting steps:

Fault PhenomenonTroubleshooting Methods
Unresponsive or erratic stick movement
  • Check internal wiring connections to the gimbal for looseness or damage.
  • Verify that the gimbal is securely mounted within the remote controller.
  • Ensure no debris is obstructing the gimbal's movement.
  • Recalibrate your remote controller's sticks via its internal menu.
Stick does not return to center
  • Check the Centering and Mode Adjustment (Point 3 in Setup) to ensure it's configured for auto-centering if desired.
  • Adjust spring tensions (Points 1 & 2 in Setup) to ensure adequate return force.
  • Ensure no physical obstruction prevents the stick from returning to center.
Stiff or loose stick feel
  • Adjust the Left/Right and Up/Down Spring Tensions (Points 1 & 2 in Setup).
  • Adjust the Stick Tension (Point 4 in Setup).

6. Specifications

FeatureSpecification
Induction TypeHall Metal Joystick
Working Voltage3.3V DC
LinearityReal-time (without delay)
Adjustable Travel38° - 54°
Adjustable ModeYes (Centering/Non-centering)
Adjustable TensionYes
BearingsFour bearings
Temperature Range-20°C to 85°C
Dimensions (Depth x Width x Height)33.3mm x 53mm x 59.92mm
CompatibilityHelloRadio V16, V14; Compatible with T18, T16, TX16, BOXER
MaterialAviation Grade CNC Aluminum

7. User Tips

  • Personalize Your Feel: Take advantage of the extensive adjustment options to fine-tune the stick tension and centering to perfectly match your flying style and preferences. Experiment with different settings to find what works best for you.
  • Enjoy the Precision: The Hall sensors and CNC construction provide exceptional accuracy and durability. Appreciate the smooth, consistent feel and real-time response during your flights.
  • Regular Checks: Periodically check the tightness of the adjustment screws and the overall mounting of the gimbal within your remote controller, especially after extensive use or if you notice any change in stick feel.

8. Warranty and Support

For any questions, technical assistance, or warranty inquiries regarding your HelloRadio VG01 CNC Aluminum Hall Gimbal Stabilizer, please contact the seller or HelloRadio customer support. Please retain your proof of purchase for warranty claims. Unauthorized modification or disassembly may void your warranty.

© 2024 HelloRadio. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.