1. Safety Information
⚠️ Disclaimer: Please be aware of potential fire risks and strictly follow this instruction manual for charging and storage. While using the product, always wear appropriate protective equipment and fully comply with all applicable local laws and regulations.
Always prioritize safety when operating your iScooter F2. Read all instructions carefully before first use.
- Wear a helmet and other protective gear (knee pads, elbow pads) at all times.
- Ensure you are familiar with local regulations regarding electric scooter use.
- Do not ride in adverse weather conditions (heavy rain, snow, ice).
- Avoid riding on uneven surfaces, steep inclines, or in heavy traffic.
- Maintain a safe distance from other vehicles and pedestrians.
- Do not perform stunts or dangerous maneuvers.
- Keep both hands on the handlebars while riding.
- Do not carry passengers or heavy loads that exceed the maximum weight limit.
2. Product Overview
The iScooter F2 is a foldable electric scooter designed for urban commuting and leisure. It features a powerful 500W motor, a 36V 7.8AH battery, and 10-inch pneumatic tires for a comfortable ride. It also includes a removable basket and an adjustable seat for added convenience.

Figure 2.1: iScooter F2 Electric Scooter with key features (36V7.8AH Battery, 30KM/H Max Speed, 10 inch Pneumatic Tires, 500W Motor).
Component Identification

Figure 2.2: Detailed diagram of the iScooter F2 components.
- Throttle
- Battery Level Indicator
- Brake Lever
- Handlebar Height Adjustment Clamp
- Folding Latch & Lock Ring
- Headlight
- Charging Port
- Ignition Keyhole
- Bell
- Seat
- Rear Basket
- 2-in-1 Taillight & Brake Light
- Seatpost Taillight Mount
- Kickstand
3. Setup and Assembly
Unpacking and Initial Inspection
Carefully remove all components from the packaging. Verify that all parts listed below are present and undamaged.

Figure 3.1: Included items in the package.
- Electric Scooter (main unit)
- Charger (x1)
- Keys (x2)
- Rear Basket (x1)
- User Manual (multi-language)
Unfolding the Scooter
The iScooter F2 features a one-step folding design for portability.
- Locate the Folding Latch & Lock Ring (5) on the steering column.
- Release the latch and carefully unfold the steering column until it locks securely into place.
- Ensure all locking mechanisms are engaged before use.

Figure 3.2: One-step folding mechanism.
Basket and Seat Installation
Attach the rear basket to the Seatpost Taillight Mount (13) as per the instructions provided in the multi-language manual. The seat is adjustable for height; loosen the clamp, adjust to a comfortable position, and re-tighten.
Initial Charging
Before first use, fully charge the scooter's battery. The charging port (7) is located on the scooter's body.
- Connect the charger to the charging port.
- Plug the charger into a standard wall outlet.
- The charging time is approximately 5-6 hours.
- The battery level indicator (2) will show charging status. Disconnect the charger once fully charged.

Figure 3.3: Battery and charging information.
4. Operating Instructions
Power On/Off
Insert the key into the Ignition Keyhole (8) and turn it to the 'ON' position to power on the scooter. Turn the key to 'OFF' to power off.
Riding Modes and Speed Adjustment
The iScooter F2 offers two riding modes: 15 KM/H and 30 KM/H.

Figure 4.1: Speed adjustment method.
To switch between speed modes after turning on the scooter:
- Hold the Brake Lever (3).
- Turn the Throttle (1) twice.
Acceleration and Braking
- Acceleration: Gently twist the Throttle (1) to accelerate.
- Braking: Squeeze the Brake Lever (3) to engage the dual drum brakes. The 2-in-1 Taillight & Brake Light (12) will illuminate when braking.

Figure 4.2: Dual drum brakes for safe riding.
Lighting System
The scooter is equipped with a Headlight (6) and a 2-in-1 Taillight & Brake Light (12) to enhance visibility.

Figure 4.3: Complete lighting system for night visibility.
Ensure lights are on when riding in low-light conditions or at night.
Battery Level Indicator
Monitor the Battery Level Indicator (2) on the handlebar to check the remaining battery charge. Recharge the scooter when the battery level is low.
5. Maintenance
General Cleaning
Clean the scooter regularly with a damp cloth. Do not use high-pressure water jets or corrosive cleaning agents. Ensure the charging port is covered when cleaning.
Tire Care
The iScooter F2 uses 10-inch pneumatic tires. Regularly check tire pressure and inflate to the recommended PSI (refer to the tire sidewall for specific pressure). Inspect tires for wear and tear, and replace them if necessary.
Brake Inspection
Periodically check the functionality of the dual drum brakes. Ensure the brake levers operate smoothly and the brakes respond effectively. If you notice any issues, have them inspected by a qualified technician.
Battery Care and Storage
- Always use the original charger provided.
- Do not overcharge or completely drain the battery.
- For long-term storage, charge the battery to about 50-70% and store the scooter in a cool, dry place. Recharge every 1-2 months to prevent deep discharge.
- Avoid exposing the battery to extreme temperatures.
6. Troubleshooting
This section addresses common issues you might encounter with your iScooter F2. For problems not listed here, please contact customer support.
| Problem | Possible Cause | Solution |
|---|---|---|
| Scooter does not power on | Battery is drained; Key not in 'ON' position; Loose connections | Charge the battery; Ensure key is fully turned to 'ON'; Check for visible loose connections (if safe to do so) |
| Reduced range or power | Low battery charge; Overloaded scooter; Low tire pressure; Battery degradation | Fully charge battery; Ensure load is within limits; Inflate tires to correct pressure; Contact support if battery degradation is suspected |
| Brakes feel weak or unresponsive | Brake cable adjustment needed; Worn brake pads | Have brakes inspected and adjusted by a technician; Replace worn brake pads |
| Unusual noises during operation | Loose components; Debris in motor/wheel; Worn bearings | Inspect scooter for loose parts; Clean any visible debris; Contact support for further diagnosis |
7. Specifications
| Feature | Specification |
|---|---|
| Brand | iScooter |
| Model Number | F2 |
| Max Motor Power | 500W |
| Max Speed | 30 km/h |
| Battery Capacity | 36V 7.8AH |
| Range Per Charge | 25-30 km |
| Charging Time | 5-6 hours |
| Tire Size | 10 inch |
| Tire Type | Pneumatic Tire |
| Braking System | Dual Drum Brakes (Front and Rear) |
| Lighting | Headlight and Rear Safety Warning Taillight |
| Max Load | 120 KG |
| Climbing Angle | 15° |
| Foldable | Yes |
| Unfolded Dimensions (L x H) | 110 cm x 95 cm (43 in x 37 in) |
| Folded Height | 61 cm (24 in) |
| Deck Width | 21.5 cm |
| Applicable People | Men (General use, suitable for adults) |
8. User Tips
- Pre-Ride Check: Always perform a quick check before each ride: ensure tires are inflated, brakes are working, and all quick-release mechanisms are secure.
- Smooth Acceleration: For a comfortable ride and to conserve battery, accelerate gradually rather than abruptly.
- Anticipate Stops: Plan your braking in advance, especially at higher speeds, to ensure smooth and safe stops.
- Basket Usage: The removable basket is convenient for light items. Avoid overloading it to maintain scooter balance and stability.
- Adjust Seat Height: Find the optimal seat height for your comfort and control. A proper riding posture enhances safety and reduces fatigue.
- Visibility: Even with the built-in lights, consider wearing reflective clothing, especially when riding at dawn, dusk, or night.
- Road Conditions: While the pneumatic tires adapt to various conditions, always be mindful of potholes, wet surfaces, and debris.
9. Warranty and Support
For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your proof of purchase for any warranty claims.