AOLION Joypad Charging Grip Bracket

Introduction

The AOLION Joypad Charging Grip Bracket is designed to enhance your Nintendo Switch gaming experience by providing a comfortable grip for your Joy-Cons while simultaneously charging them. This compact and portable accessory features a built-in 3400mAh battery, Type-C charging port, and independent LED indicators for charging status. It allows you to charge your Joy-Cons even when they are in a protective case, and includes safety features like a self-resetting fuse for overcurrent protection.

Setup

1. Inserting Joy-Cons: Align the Nintendo Switch Joy-Con controller with the slide groove on the charging grip. Gently slide the Joy-Con into the grip until it clicks into place. The upgraded slide groove is designed to prevent damage to the handles.

   

2. Removing Joy-Cons: To remove a Joy-Con, press the small removal button located on the back of the grip and slide the Joy-Con upwards and out.

Operating Instructions

1. Charging the Joy-Cons: Connect a Type-C data cable to the charging port on the grip and plug the other end into a 5V power source (e.g., a wall adapter, power bank, or computer USB port). The Joy-Cons will begin charging automatically.

   

2. LED Indicator Status:
   • A Red Light indicates that the Joy-Cons are currently charging.
   • A Green Light indicates that the Joy-Cons are fully charged.

   

3. Playing While Charging: The grip is designed to allow you to continue playing with your Joy-Cons while they are connected to a power source and charging.

   

Maintenance

• Keep the charging grip clean and dry. Use a soft, dry cloth to wipe off any dust or debris.
• Avoid exposing the device to extreme temperatures, humidity, or direct sunlight.
• Do not attempt to disassemble or modify the charging grip, as this may void any potential warranty and cause damage.

Troubleshooting

• Joy-Cons not charging:
  • Ensure the Type-C cable is securely connected to both the grip and the power source.
  • Verify that the power source is active and providing 5V output.
  • Check the LED indicators; if no light appears, try a different cable or power source.
• Difficulty inserting/removing Joy-Cons:
  • Ensure the Joy-Cons are correctly aligned with the slide groove.
  • If using third-party Joy-Cons, slight differences in molds may cause a tighter fit. This is generally normal and should not damage the handle. Apply gentle, consistent pressure.
  • Ensure the removal button is fully pressed when attempting to remove Joy-Cons.
• Overcurrent Protection: The grip features a built-in PTC self-resetting fuse to protect against overcurrent. If an overcurrent event occurs, the fuse will reset automatically. If charging issues persist after such an event, disconnect and reconnect the power source.

  

Specifications

User Tips

• Charge with Case On: One of the key advantages of this grip is its ability to charge Joy-Cons even when they are housed in a protective case. This saves time and hassle by eliminating the need to remove the case before charging.
• Portability: The compact and mini design makes this charging grip ideal for travel. It's lightweight and easy to carry, making outdoor gaming effortless.

  

• Impact Resistance: The grip has passed multiple drop tests, indicating good durability. While it is impact resistant, always handle electronic devices with care to prolong their lifespan.

  

Warranty and Support

No specific warranty information is provided for this product. For support or inquiries, please contact the seller or retailer from whom you purchased the product.