XGP X1 Motorcycle Helmet Bluetooth Headset User Manual

1. Introduction

The XGP X1 Motorcycle Helmet Bluetooth Headset V5.3 is designed to enhance your riding experience by providing convenient communication and entertainment features. It allows you to connect your phone via Bluetooth to answer calls, listen to music, or activate voice assistants for navigation and other functions, enabling you to focus on your ride safely.

2. Package Contents

Please check the package to ensure all items are present:

Image: All components included in the XGP X1 package.

• 1 x X1 Main Unit
• 1 x 40mm Hi-Fi Speaker Set
• 1 x Boom Microphone
• 1 x Button Microphone
• 1 x USB-C Cable
• 1 x Metal Bracket
• 1 x 3M Sticker Bracket
• 1 x User Manual (this document)
• 1 x Speaker Pads
• Gift Box (packaging)

3. Specifications

4. Setup

4.1. Charging the Device

Before first use, fully charge the X1 main unit.

1. Connect the provided USB-C cable to the charging port on the X1 main unit.
2. Connect the other end of the USB-C cable to a USB power adapter (not included) or a computer's USB port.
3. The indicator light will show charging status (e.g., red for charging, blue for fully charged).
4. A full charge takes approximately 1.5-2 hours.

Image: X1 unit connected via Type-C cable for charging, showing battery life indicators.

4.2. Installing on Helmet

The X1 headset is designed for universal compatibility with most riding helmets. Two types of brackets are provided for installation:

Image: X1 mounted on a full-face helmet, demonstrating universal fit.

1. Choose your bracket:
   • Metal Bracket: Ideal for helmets with a suitable edge to clamp onto.
   • 3M Sticker Bracket: Suitable for helmets where clamping is not feasible, providing a strong adhesive mount.
2. Mount the main unit: Securely attach the X1 main unit to the chosen bracket on the side of your helmet.
3. Install Speakers: Place the 40mm Hi-Fi speakers inside the helmet's ear pockets. Use the provided speaker pads for comfort and optimal sound positioning.
4. Install Microphone:
   • Boom Microphone: Recommended for open-face or modular helmets, position it close to your mouth.
   • Button Microphone: Suitable for full-face helmets, attach it to the inside of the chin bar.
5. Route the speaker and microphone cables neatly within the helmet lining to avoid obstruction.

4.3. Bluetooth Pairing with Mobile Phone

The X1 uses Bluetooth 5.3 for a fast and stable connection.

Image: Close-up of the Bluetooth 5.3 chip, highlighting stable connection.

1. Ensure the X1 headset is turned off.
2. Press and hold the main function button on the X1 until the indicator light flashes rapidly (e.g., red and blue alternately), indicating pairing mode.
3. On your mobile phone, go to Bluetooth settings and search for available devices.
4. Select "XGP X1" from the list of devices.
5. Once connected, the indicator light on the X1 will change (e.g., slow blue flashes).

5. Operating Instructions

5.1. Power On/Off

• Power On: Press and hold the main function button for approximately 3 seconds until you hear a prompt and the indicator light turns on.
• Power Off: Press and hold the main function button for approximately 5 seconds until you hear a prompt and the indicator light turns off.

5.2. Music Playback

Image: Detailed graphic of a speaker driver, emphasizing Hi-Fi Audio quality.

Once connected to your mobile phone via Bluetooth, you can control music playback directly from your phone or using the X1's controls (refer to the quick start guide for specific button functions):

• Play/Pause: Short press the main function button.
• Next Track: Short press the '+' button.
• Previous Track: Short press the '-' button.
• Volume Up: Long press the '+' button.
• Volume Down: Long press the '-' button.

5.3. Call Management

Image: Rider on a motorcycle with the X1 headset, showing an incoming call being auto-answered.

• Auto-answer Incoming Call: The X1 is configured to automatically answer incoming calls after a few rings for convenience and safety.
• Manual Answer/End Call: Short press the main function button to answer or end a call.
• Reject Call: Long press the main function button to reject an incoming call.

5.4. Voice Control (Siri/Google Assistant)

Image: Illustration of a helmeted rider using voice commands for Siri/Google Assistant.

Activate your phone's voice assistant (Siri or Google Assistant) with a single button press:

• Activate Voice Assistant: Double-press the main function button.
• Once activated, you can use voice commands for GPS navigation, music selection, making calls, and more, without taking your hands off the handlebars.

5.5. Connecting Two Mobile Phones

Image: X1 unit shown connected to two smartphone screens simultaneously.

The X1 headset supports connecting to two mobile phones or Bluetooth devices simultaneously:

1. Pair the first phone following the steps in Section 4.3.
2. After the first phone is connected, put the X1 back into pairing mode (refer to the quick start guide for specific steps, usually a long press of a different button or a specific combination).
3. Pair the second phone following the same steps as for the first phone.
4. Once both phones are paired, the X1 will manage connections, allowing you to receive calls from either device.

5.6. Intercom Function

The XGP X1 supports intercom functionality, allowing two X1 units to connect directly for rider-to-rider communication.

1. Ensure both X1 units are powered on and not connected to any other Bluetooth devices.
2. Initiate intercom pairing mode on both units (refer to the quick start guide for specific button presses, typically a long press of a dedicated intercom button or a combination).
3. The units will search for each other and automatically connect.
4. Once connected, you can communicate directly with the other rider.

6. Maintenance

Image: X1 unit mounted on a helmet in the rain, demonstrating its IP67 waterproof capability.

• Waterproofing: The X1 headset has an IP67 waterproof rating, meaning it is protected against dust and can withstand immersion in water up to 1 meter for 30 minutes. It is designed to resist rainwater during cycling. However, avoid prolonged submersion or high-pressure water jets.
• Cleaning: Wipe the main unit with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure all ports are dry before charging.
• Storage: Store the device in a cool, dry place when not in use. Avoid extreme temperatures.

7. Troubleshooting

• Device won't turn on: Ensure the battery is charged. Connect to a power source and try again.
• Cannot pair with phone:
  • Ensure the X1 is in pairing mode (flashing indicator light).
  • Turn off and on your phone's Bluetooth.
  • Forget the device from your phone's Bluetooth list and try pairing again.
  • Ensure the X1 is not already connected to another device.
• No sound or poor sound quality:
  • Check the volume levels on both the X1 and your phone.
  • Ensure speakers are correctly positioned inside the helmet.
  • Verify the Bluetooth connection is stable.
• Intercom not connecting:
  • Ensure both X1 units are in intercom pairing mode.
  • Make sure both units are within range of each other.
  • Confirm both units are not connected to other Bluetooth devices.
• Compatibility with other brands: The XGP X1 is designed to work optimally with other XGP X1 units for intercom. While it uses standard Bluetooth protocols for phone connection, intercom functionality with other brands is not guaranteed.

8. User Tips

• Safety First: Utilize the automatic call answering and voice control features to minimize distractions and keep your hands on the handlebars while riding.
• Intercom for Group Rides: If riding with a companion, consider purchasing two X1 units to take advantage of the direct intercom communication for enhanced safety and coordination.
• Microphone Choice: Select the appropriate microphone (boom for open-face, button for full-face) for optimal voice clarity and noise reduction.
• Battery Management: Charge your device fully before long rides to enjoy uninterrupted music and communication. The 800mAh battery offers extended usage times.

9. Warranty and Support

For warranty information and technical support, please refer to the official XGP website or contact your retailer. Keep your proof of purchase for warranty claims.