1. Introduction
The GuliKit ES/ES PRO Wireless Controller is a versatile e-sports controller designed for an enhanced gaming experience across multiple platforms. It features advanced technologies such as Hall Effect joysticks (ES model) or TMR joysticks (ES PRO model) for anti-drift and high precision, GuliKit Hyperlink Gen 2 wireless technology, and a built-in gyroscope for motion controls. This manual provides detailed instructions for setting up, operating, and maintaining your controller.
The controller is compatible with Nintendo Switch, Nintendo Switch 2, Windows PCs, Android devices, and iOS devices.
2. Package Contents
Please check the contents of your package. The exact items may vary slightly between the ES and ES PRO models.
- GuliKit ES or ES PRO Wireless Controller
- USB-C to USB-A Data Cable (Included with ES PRO, not included with ES)
- Thumb Grip Caps (May be included with ES controller)
- User Manual (This document)

3. Controller Overview
Familiarize yourself with the buttons and features of your GuliKit controller:

- USB-C Port: For charging and wired connection.
- Indicator Light:
- Orange: Charging
- Green: Fully charged
- Flashing light: Pairing mode
- Solid White: No custom settings configured
- Solid Blue: Custom settings configured
- Power-Off Button: Press to power on, press and hold to power off.
- Home Button: Press to wake up the console (e.g., Nintendo Switch).
- Setting Button: Used in combination with other buttons for custom settings.
- Pairing Button: Press and hold to enter pairing mode.
- Slide Switch: Used to change controller mode (e.g., PC mode, NS mode).
- Joysticks (L3/R3): Left and Right analog sticks, also clickable buttons.
- D-pad: Directional pad.
- Action Buttons: A, B, X, Y.
- Shoulder Buttons: L, R.
- Trigger Buttons: ZL, ZR.
- Plus (+) / Minus (-) Buttons: System function buttons.
The controller will automatically power off after 15 minutes of inactivity. When connected via USB or Auto-Continuous Fire (Turbo) is active, the controller will not power off.
4. Setup and Pairing
4.1 Pairing Methods with PC
4.1.1 Bluetooth Pairing (730Hz Polling Rate)
Requires your computer to have Bluetooth functionality.
- Switch the controller to PC mode using the slide switch.
- Press and hold the Pairing Button for 2 seconds until the indicator light begins flashing rapidly. This indicates that pairing mode has started.
- On your computer, open the Bluetooth settings, search for new devices, and select "GuliKit XW Controller" to pair.
- Once the interface displays "Connected", the pairing is complete.
4.1.2 Wired Connection (1000Hz Polling Rate)
- Set the controller to PC mode.
- Connect one end of the USB-C to USB-A data cable to the controller, and insert the other end into a USB-A port on your computer.
Tip: If you're using a desktop computer, it is recommended to use one of the USB ports on the back of the computer case for a more stable connection.
4.2 Wireless Pairing with Android Devices
- Set the controller to PC mode.
- Press and hold the Pairing Button for 2 seconds until the indicator light starts blinking quickly, indicating that pairing mode has been activated.
- On your Android phone, go to Bluetooth settings, search for new devices, and select "GuliKit XW Controller".
- The interface displays "Connected" to the new controller, indicating that the pairing is complete.
4.3 Pairing Methods with Nintendo Switch / Switch 2
- Set the controller to NS mode, turn it on, then press and hold the Pairing Button for 2 seconds. The indicator light will blink quickly, indicating that pairing has started.
- When the Switch / Switch 2 is on the black screen (sleep) state, press the HOME button on the Joy-Con to wake it up. It will then enter the controller pairing interface.
- Once the interface shows that a new controller is connected, the pairing is complete.


5. Operation and Custom Settings
All customized settings mentioned below require holding the Setting Button while pressing the corresponding buttons. When customized settings are configured, the indicator light will turn blue. When no customized settings are configured, the indicator light will remain white. When the battery is low, the indicator light will flash, and the vibration function will automatically turn off. Once the battery level is restored, vibration will turn back on automatically.
5.1 Joysticks Calibration
- While the controller is powered on, press and hold the "L," "R," "D-pad Left," and "B" buttons simultaneously for 6 seconds to enter calibration mode.
- During calibration, rotate both the left and right joysticks in full circles 2 to 3 times.
- Once calibration is complete, the controller will vibrate once to indicate success and will automatically exit calibration mode.
5.2 Gyroscope Calibration
- While the controller is powered on and placed on a flat surface, press and hold the "+", "-", "D-pad Left", and "B" buttons simultaneously to initiate automatic gyroscope calibration.
- Once calibration is complete, the controller will vibrate once to indicate success.
Note: Calibration is not necessary when the gyroscope is functioning normally.

5.3 Custom Settings (Hold Setting Button + Button Combination)
- Clear All Settings (Reset):
Hold Setting Button + Power-Off Button. Long vibration indicates that the reset process is complete and the controller has been restored to its default settings. - Joystick Dead Zone Setting:
Hold Setting Button + Home Button. One vibration: Dead zone enabled on joysticks. Long vibration: Dead zone disabled on joysticks (Default).
Joystick Deadzone Off/On Adjustable (Off by Default). - Continuous Fire (Turbo) Setting:
Hold Setting Button + A Button. One vibration: Manual Turbo Mode - Continuous fire is activated while holding the button and stops when released. Two vibrations: Auto Turbo Mode - Press the button once to start continuous fire, and press it again to stop. Long vibration: Disables both manual and auto turbo modes (Default).
Semi-auto Turbo/Full-auto Turbo Function (A/B/X/Y/R/ZR). - A-B X-Y Button Swap (ES PRO Only):
Hold Setting Button + Plus (+) Button. One vibration: Swaps the input functions of the A-B and X-Y buttons. Long vibration: Restores the default button assignments (Default).
Non-physical A-B/X-Y Button Swap Between PC-layout And Switch-Layout Functions (ES PRO Only). - Adjust Vibration Intensity:
Hold Setting Button + Minus (-) Button. One vibration: Weak vibration. Two vibrations: Standard vibration (Default). Three vibrations: Strong vibration. Long vibration: Turn off vibration.
Asymmetric Rotory Vibration Motors For Immersive Gaming (3-level Vibration Intensity Adjustment, Optional On/off). - Adjust Joystick Sensitivity (ES PRO Only):
Hold Setting Button + R3 (Right Joystick Press) or L3 (Left Joystick Press). One vibration: Sensitivity 50%. Two vibrations: Sensitivity 100% (Default). Three vibrations: Sensitivity 150%. Each joystick can be configured individually.
3 Levels Of Adjustable Joystick Sensitivity (ES PRO Only). - Set 4-Direction Mode on D-Pad (ES PRO Only):
Hold Setting Button + D-pad Up. One vibration: Switches the D-pad to 4-direction mode. Long vibration: Restores the default 8-direction mode (Default).
Tactile Switch D-pad: Sensitive And Accurate. - Adjust Motion Aim Assist for PC FPS Games (ES PRO Only):
Hold Setting Button + ZL Trigger. One vibration: Low-sensitivity aim assist. Two vibrations: Medium-sensitivity aim assist. Three vibrations: High-sensitivity aim assist. Long vibration: Motion aim assist disabled (Default).
Button Activation Settings:- Hold Setting Button + L Button: Motion assist activates while holding the L button in-game.
- Hold Setting Button + ZL Trigger: Motion assist activates while holding the ZL trigger in-game.

Patented Gyro Motion Aim Function For Faster Aiming In Pc Fps Games (ES PRO Only).
6. Specifications
| Feature | Specification |
|---|---|
| Model Number | ES/ES PRO |
| Compatible Brand/Model | Nintendo (Switch, Switch 2), PC (Windows), Android, iOS |
| Type | Gamepads |
| Trigger Button Type | Hall-Linear (256-Level Hall Effect Triggers) |
| Joysticks | ES: Hall Effect (2200-level High Precision) ES PRO: TMR (4000-level High Precision) |
| Wireless Technology | Bluetooth, GuliKit Hyperlink Gen 2 |
| Wired Polling Rate | 1000Hz (1.87ms latency) |
| Bluetooth Polling Rate | 730Hz (3.25ms latency) |
| Battery | 950mAh Polymer Battery |
| Battery Life | Up to 30 hours (based on full-auto Turbo mode testing with non-vibration) |
| Vibration | Asymmetric Rotory Vibration Motors (3-level adjustment) |
| D-pad | Tactile Switch D-pad (ES PRO: Quick Switch to 4-direction from 8-direction) |
| Dimensions (L x W x H) | 20 cm x 10 cm x 8 cm |
| Weight | 0.4 kg |




7. Troubleshooting
- Controller not turning on: Ensure the battery is charged. Connect the controller via USB-C cable to a power source.
- Controller not pairing:
- Ensure the controller is in the correct mode (PC mode for PC/Android/iOS, NS mode for Switch).
- Ensure the controller is in pairing mode (flashing indicator light).
- Check your device's Bluetooth settings and try re-scanning for devices.
- If connecting to a PC via Bluetooth, disable "Show notifications to connect using 'Swift Pair'" in Windows settings to avoid potential latency issues.
- Input lag or low polling rate:
- For wired connections, ensure you are using a stable USB port, especially on desktop PCs (rear USB ports are often more stable).
- When connecting multiple Bluetooth devices to one adapter, bandwidth sharing may lower polling rates. For optimal performance, use one adapter per controller.
- Use 5GHz Wi-Fi to avoid 2.4GHz interference with Bluetooth, which may reduce polling rates.
- Joystick drift: Perform the Joysticks Calibration procedure as described in Section 5.1.
- Motion control issues: Perform the Gyroscope Calibration procedure as described in Section 5.2.
- Vibration not working: Check if vibration is turned off in custom settings (Section 5.3, Adjust Vibration Intensity). If the battery is low, vibration may automatically turn off.
8. User Tips
- Optimal Polling Rate: For displays with a refresh rate of 240Hz or lower, a polling rate of 300Hz+ is generally sufficient. However, lower latency is always preferable for competitive gaming.
- Joystick Sensitivity (ES PRO):
- 50%: Recommended for anti-motion sickness or more precise aiming.
- 100%: Default setting for regular use.
- 150%: Recommended for games requiring faster diagonal movement or FPS games needing quicker turning.
- ES Controller Data Cable: Remember that the GuliKit ES controller does not include a USB-C data cable in the package. You will need to provide your own for wired connection or charging.
- Custom Keycaps: Switch-layout keycaps for physical button swapping are sold separately for the ES PRO model.
9. Safety Information
CAUTION!
This product contains small parts (such as buttons, joystick caps, and screws) that may pose a choking hazard if swallowed by children. Keep out of reach of small children.
10. Support and Further Information
For more questions, answers, and detailed support, please visit the official GuliKit website and navigate to the "Support" section. Look for the "Frequently Asked Questions" (FAQ) related to your controller model.
Official Website: www.gulikit.com
A user manual in PDF format is also available for download: GuliKit ES PRO Controller User Manual (PDF)