1. Introduction
Thank you for choosing the Devoko 120x60cm Sit-Stand Desk. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your new height-adjustable desk. Please read this manual thoroughly before use and retain it for future reference.
Image: Devoko 120x60cm Sit-Stand Desk in a typical office setup.
2. Safety Information
To ensure safe operation and prolong the lifespan of your desk, please observe the following:
- Ensure all components are securely fastened before use.
- Do not overload the desk beyond its maximum weight capacity.
- Keep hands and objects clear of moving parts during height adjustment.
- Avoid placing liquids directly on the control panel or motor components.
- If any unusual noise or malfunction occurs, discontinue use immediately and consult the troubleshooting section.
- This desk is designed for indoor use only.
3. Components Overview
The Devoko Sit-Stand Desk comes with all necessary components and tools for assembly. Please verify that all parts are present before beginning assembly.
Image: Components of the Devoko adjustable desk, including three tabletop sections, frame, and accessories.
Key Features:
- Pre-drilled holes: No additional drilling is required for assembly.
- Installation tools: All necessary tools are included.
- Durable Motor: Provides stable lifting and lowering.
- Automatic Rebound Design: Enhances safety during height adjustments.
- Overheat Protection: Safeguards the motor from damage.
- Multifunctional Control Panel: Features up/down buttons and two memory presets.
- Humanized Design: Includes a headphone hook, cable grommet for wire management, and adjustable non-slip feet.
4. Assembly Instructions
Assembly of the Devoko Sit-Stand Desk is straightforward with the included tools and pre-drilled holes. Follow these steps carefully:
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches.
- Assemble the Frame: Attach the crossbars to the lifting columns using the provided screws. Ensure all connections are secure.
- Attach Feet: Secure the desk feet to the bottom of the lifting columns.
- Mount the Motor: Install the motor and control box onto the designated areas of the frame. Connect all cables as per the wiring diagram (if provided separately, otherwise ensure connections are firm).
- Attach Tabletop Sections: Place the three tabletop sections onto the assembled frame. Align the pre-drilled holes and secure them with the provided screws.
- Install Accessories: Attach the headphone hook, cable grommet, and any other accessories as desired.
- Final Check: Double-check all screws and connections to ensure they are tight and secure.
For visual guidance, refer to the assembly diagrams provided in the original packaging.
5. Operating Instructions
The Devoko Sit-Stand Desk features an intuitive control panel for easy height adjustment and memory functions.
Image: Multifunctional Control Panel.
Height Adjustment:
- To Raise: Press and hold the Up arrow (^) button until the desk reaches your desired standing height.
- To Lower: Press and hold the Down arrow (v) button until the desk reaches your desired sitting height.
Memory Presets:
The control panel allows you to save two preferred height settings for quick adjustments.
- To Save a Preset:
- Adjust the desk to your desired height using the up/down arrows.
- Press the M button (if present, otherwise proceed to step c).
- Press and hold one of the memory buttons (1 or 2) until you hear a beep or see a confirmation on the display (if available). The current height is now saved to that button.
- To Use a Preset: Simply press the corresponding memory button (1 or 2). The desk will automatically move to the saved height.
Image: Control panel details with memory functions and error indicator note.
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your Devoko Sit-Stand Desk.
- Cleaning: Wipe the desk surface and frame with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that may damage the finish. The desk surface is designed to be easy to clean.
- Inspections: Periodically check all screws and connections to ensure they remain tight. Re-tighten if necessary.
- Cable Management: Ensure cables are neatly managed using the provided grommet and cable ties to prevent snagging or damage during height adjustments.
Image: Desk stability and easy-to-clean surface.
7. Troubleshooting
If you encounter issues with your Devoko Sit-Stand Desk, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Desk does not move. | Power cable disconnected, motor error, or overload. |
|
| Red light indicator on control panel. | Anomaly or error detected by the system. |
|
| Desk moves unevenly or makes unusual noise. | Loose connections, obstruction, or motor issue. |
|
Resetting the Desk:
If the desk is unresponsive or displays an error, a reset may resolve the issue. Consult your specific control panel instructions for the exact reset procedure. Typically, this involves pressing and holding certain buttons (e.g., both up and down arrows simultaneously, or a dedicated reset button) until the desk moves to its lowest position and then slightly up, indicating a successful reset.
8. Specifications
| Feature | Detail |
|---|---|
| Desk Dimensions (L x W) | 120 cm x 60 cm (47.2 in x 23.6 in) |
| Height Adjustment Range | 71 cm to 119 cm (28 in to 46.8 in) |
| Maximum Weight Capacity | Up to 70 kg (154 lbs) |
| Noise Level | < 50 dB |
| Motor Lifespan | 50,000 lift cycles |
| Safety Features | Automatic Rebound, Overheat Protection |
| Control Panel | Up/Down buttons, 2 Memory Presets |
| Additional Features | Headphone hook, Cable grommet, Adjustable non-slip feet |
| Assembly | Requires assembly, pre-drilled holes, tools included |
Image: Desk dimensions and height range.
Image: Durable motor features and specifications.
9. User Tips
Maximize your experience with the Devoko Sit-Stand Desk with these helpful tips:
- Ergonomic Setup: Adjust your monitor height so the top of the screen is at eye level when standing or sitting. Keep your keyboard and mouse within easy reach.
- Vary Your Posture: Make it a habit to switch between sitting and standing throughout your workday. This can help reduce fatigue and improve focus.
- Utilize Memory Presets: Save your ideal sitting and standing heights to the memory buttons for quick and effortless transitions.
- Cable Management: Use the integrated cable grommet and cable ties to keep your workspace tidy and prevent cables from interfering with desk movement.
10. Warranty and Support
For warranty information, please refer to the documentation provided at the time of purchase or contact your seller directly. Devoko is committed to providing quality products and customer satisfaction.
If you have any questions, require technical assistance, or need to report a problem, please contact Devoko customer support through the seller's platform or the official Devoko website.
