1. Introduction
The ZIBOO SM206E-Solar Power Meter is a precision instrument designed for measuring solar radiation. It is suitable for a wide range of applications including solar PV inspection, solar water heater installation, solar energy research, physical and optical experiments, meteorology, and agriculture. It can also be used to measure the light transmittance of glass and verify the performance of glass.
This manual provides detailed instructions for the safe and effective use of your SM206E-Solar Power Meter. Please read it thoroughly before operation.
2. Product Overview
The SM206E-Solar Power Meter features a compact design with an easy-to-read LCD display. Key components are:
- Photosensitive Window: The sensor for detecting solar radiation.
- LCD Display: Shows measurement readings, units, and indicators.
- Power On/Off Button: To turn the device on or off.
- Unit Switch Button (W/B): Toggles between W/m² and Btu/(ft²-h) measurement units.
- Data Hold Button (DH): Freezes the current reading on the display.
3. Specifications
| Feature | Specification |
|---|---|
| Measuring Range | 0.1-1999.9 W/m², 0.1-1999.9 Btu/(ft²-h) |
| Resolution | 0.1 W/m², 0.1 Btu/(ft²-h) |
| Error Range | ± (10%R + 2dgts) R: readings |
| Temperature Error | ±0.38 W/m² / ℃ [±0.12 Btu/(ft²-h)/℃] deviation at 25℃ |
| Display | 4 1/2 LCD display, maximum displayed numerical value 19999, overload “OL” |
| Drift | <±1.5% /year |
| Wave Length Range | 340nm-1100nm, Incidence Angle normal direction less than ±45 degree, peak wavelength 900nm |
| Sampling Time | 2.5 times/s |
| Operation Temperature and Humidity | 0°C to 40°C, <80%RH |
| Storage Temperature and Humidity | -10°C to 50°C, <70%RH |
| Battery Needed | 9V battery (not included) |
| Battery Operation Life | Approx. 100 hours |
| Dimensions (L x W x H) | 132mm x 60mm x 38mm (5.2in x 2.4in x 1.5in) |
| Weight | Approx. 150g |
4. Setup
- Battery Installation:
Locate the battery compartment on the back of the device (refer to Figure 5). Open the compartment cover and insert a 9V battery, ensuring correct polarity. Close the cover securely.
- Initial Power On:
Press the red Power On/Off button to turn on the device. The LCD display will illuminate.
5. Operating Instructions
- Power On/Off:
Press the red Power On/Off button to turn the meter on. Press and hold the same button for a few seconds to turn it off. The device also features automatic shutdown to conserve battery life.
- Selecting Measurement Units:
Press the "W/B" button to switch between Watts per square meter (W/m²) and British Thermal Units per square foot-hour (Btu/(ft²-h)). The selected unit will be displayed on the LCD.
Video 1: Demonstrating unit selection and data hold functions. - Taking Measurements:
Point the photosensitive window towards the solar radiation source you wish to measure. Ensure no obstructions are blocking the sensor. The current solar power reading will be displayed on the LCD.
Figure 6: High accuracy measurement capability. - Data Hold Function:
Press the "DH" button to freeze the current reading on the display. Press "DH" again to release the hold and resume live measurements.
- Understanding the Display:
The LCD display shows the measured value, the selected unit (W/m² or Btu/(ft²-h)), and other indicators such as low battery or data hold. An "OL" indicator signifies an overload, meaning the measured value exceeds the meter's maximum range.
Figure 7: LCD Display Elements.
6. Maintenance
- Cleaning: Keep the photosensitive window clean and free from dust or smudges to ensure accurate readings. Use a soft, dry cloth for cleaning. Do not use abrasive cleaners or solvents.
- Battery Replacement: When the low battery indicator appears on the display, replace the 9V battery promptly to maintain measurement accuracy.
- Storage: When not in use for extended periods, remove the battery and store the meter in a cool, dry place within the specified storage temperature and humidity ranges (-10°C to 50°C, <70%RH).
7. Troubleshooting
- "OL" Display: If "OL" appears on the display, it indicates that the measured solar radiation exceeds the meter's maximum range (1999.9 W/m² or Btu/(ft²-h)).
- No Display/Faint Display: Check the battery. Ensure it is correctly installed and has sufficient charge. Replace if necessary.
- Inaccurate Readings: Ensure the photosensitive window is clean and unobstructed. Verify that the correct measurement unit is selected.
8. User Tips
- The meter is highly effective for measuring watt-hours per square meter, making it ideal for assessing solar panel performance.
- Its straightforward operation makes it easy to use for both beginners and experienced users.
- Remember to cover the light-sensitive window when not in use or when changing units to avoid erratic readings during the transition.
9. Warranty and Support
For warranty information or technical support, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.