CUCU-NAVI 9-inch Android 15 Multimedia Stereo for Audi A6 C7 A7

Contents

User Manual

CUCU-NAVI 9-inch Android Car Multimedia Stereo with CarPlay and GPS Navigation for Audi A6 C7 A7 (2012-2018)

Introduction

Thank you for purchasing our CUCU-NAVI 9-inch Android Car Multimedia Stereo. This manual provides detailed instructions to help you properly install, operate, and maintain your new car stereo system. Please read all instructions carefully before use to ensure safe and optimal performance.

User Manual Icon

User Manual Icon

This multimedia stereo is designed for Audi A6 C7 A7 models from 2012 to 2018, offering features like Android 15 operating system, CarPlay, Android Auto, GPS Navigation, Bluetooth, and Wi-Fi connectivity.

Safety Information

  • Ensure the vehicle is turned off and the battery is disconnected before installation to prevent electrical shorts or damage.
  • Professional installation is recommended for complex wiring or if you are unsure about any steps.
  • Do not operate the device in a way that distracts you from driving. Always prioritize road safety.
  • Keep the device away from water, moisture, and extreme temperatures.
  • Use only approved accessories and cables.

Setup and Installation

1. Distinguishing Original Vehicle System

Before proceeding with installation, it is crucial to identify your vehicle's original multimedia system configuration. This will determine the correct installation method and settings.

Compatible Audi Headunit Models

Image: Compatible Audi Headunit Models (AUDI multimedia, AUDI Symphony, AUDI concert)

The unit supports various Audi head unit models including AUDI multimedia, AUDI Symphony, and AUDI concert. Ensure your vehicle has one of these compatible systems.

1.1. Lower Version Car (No Original GPS MMI 3G)

For vehicles without an original GPS MMI 3G system, or with Audi concert/symphony head units, follow the low configuration installation guide.

Low Configuration Backside Connection Diagram

Diagram: Low Configuration Backside Connection for Audi A6 C7 A7. Shows connections for Radio Antenna, USB, Rear Camera, GPS Antenna, 4G Antenna, LVDS Connector, and Air Conditioner Panel Plug Transfer.

This diagram illustrates the connections for the radio antenna, USB ports, rear camera, GPS antenna, and 4G antenna (if applicable). The LVDS connector and air conditioner panel plug transfer are also shown.

1.2. High Version Car (With Original GPS MMI 3G)

For vehicles equipped with an original GPS MMI 3G system, or Audi multimedia head units, follow the high configuration installation guide.

High Configuration Backside Connection Diagram

Diagram: High Configuration Backside Connection for Audi A6 C7 A7. Shows connections for Radio Antenna, USB, Rear Camera, AMI Output, SIM Card Slot, GPS Antenna, 4G Antenna, Extra MIC Input, LVDS Connector, and Gateway Cable.

This diagram details connections for the radio antenna, USB ports, rear camera, AMI output, SIM card slot (for 4G devices), GPS antenna, 4G antenna, extra MIC input, LVDS connector, and the gateway cable. The gateway line is typically located in the passenger storage box.

1.3. Incompatible Headunits

The system is NOT compatible with vehicles that have a CD changer or Chorus head unit.

Incompatible Audi Headunits

Image: Examples of incompatible head units (CD changer and Chorus).

2. Airbag Cable Connection

Proper connection of the airbag cable is essential. If your car has an airbag button, an additional airbag cable may be required.

Airbag Cable Connection Tip

Image: Tip for connecting airbag cable if the car has an airbag button.

  1. Unplug the original airbag cable.
  2. Connect the original airbag cable to our provided cable.
  3. Pry open the original car armrest panel and install the hazard lights in the appropriate locations on the panel.

Note: If you plug the cable into the wrong insertion port, the screen may display an error message. Simply readjust the insertion port.

3. Rear View Camera Wiring

The system supports rear view cameras for easier parking.

Rear View Camera Support

Image: Rear View Camera, ADAS DVR, and DAB+ support.

3.1. Universal Camera Wiring

  • Manual Transmission: Connect the camera's positive wire to the positive pole of the backup lamp, and the negative wire to the negative pole of the backup lamp.
  • Automatic Transmission: No connection to the backup lamp is needed.
Universal Camera Wiring Diagram

Diagram: Universal Camera Wiring. Shows connections for 12V power, rear camera input, and backup lamp connections.

3.2. Dedicated Camera Wiring

  • Manual Transmission: Connect the camera's positive wire to the positive pole of the backup lamp, and the negative wire to the negative pole of the backup lamp.
  • Automatic Transmission: No connection to the backup lamp is needed.
Dedicated Camera Wiring Diagram

Diagram: Dedicated Camera Wiring. Shows connections for 12V power and rear camera input.

4. GPS Antenna Installation

The GPS antenna is crucial for navigation functionality. It can be mounted inside or outside the car, typically on the dashboard or roof.

GPS Antenna Placement in Car

Image: Recommended GPS antenna placement on the dashboard.

Installation Guide:

  • The GPS antenna must be installed in an open position. Satellite signals may be weakened if explosion-proof or insulation film is installed on the windshield. In such cases, it is recommended to install the GPS antenna outside the vehicle.
  • Before affixing the GPS antenna, clean the designated surface with a suitable cleaner.
  • Tear off the back of the tape and firmly press to place the GPS antenna.
  • Remove the side cover, move the cable through the storage box until it reaches the control panel of the machine. Fix the cable with a cable tie.
  • Connect the GPS antenna's plug to the machine.

5. Checking for AUX or AMI

Before purchase and installation, please confirm whether your car has an AUX or AMI port. This is important for audio connectivity.

AUX and AMI Port Check

Image: Visual guide to check for AUX and AMI ports in your Audi.

If your car has AMI but not AUX, you will need to purchase an extra AMI cable.

6. Video Installation Guide

For a visual guide on the installation process, please refer to the video below. This video demonstrates the steps for connecting the cables and mounting the unit.

Video: Demonstration of the installation process for the car multimedia system.

Operating Instructions

1. Basic System Overview

The unit features a large touch screen display, offering an intuitive interface for various functions.

Android Car GPS Navi Screen Interface

Image: Android Car GPS Navigation Screen showing the main interface with navigation, music, and Bluetooth options.

You can switch between the original car system and the Android system with a single click.

2. Initial Basic Settings

After installation, perform the following basic settings to ensure proper functionality:

2.1. Car Model Protocol Settings

  • Go to [Setting] > [Factory] > [3368] > [Car Model].
  • Select the appropriate car model (e.g., LZ(HZ)-BBA-BBA BOX-LZ(HZ)).
  • Important: These settings are pre-configured. Avoid arbitrary changes as incorrect selections can compromise vehicle functionality.

2.2. Original Menu Resolution Adjustment

  • Go to [Vehicle Settings] > [Vehicle settings] > [Screen ginseng type].
  • If your original car is Audi A4/A5, Q3, Q5, etc., select the correct original car resolution and year.

2.3. Original AUX Setting

To ensure audio from the Android navigation machine is heard:

  1. On the interface, click "Car" and then "Media".
  2. When prompted "The external audio player is selected", click "Confirm".
  3. Click "AUX -External audio player".

2.4. Factory Password/Code

The factory password is 3368. Access this via [Setting] > [Factory] > [3368].

2.5. Rear Camera Type

Configure rear camera settings:

  • If you add a rear-view camera, set the option to [on].
  • If your car has an original rear camera, set the option to [off].

2.6. Language Settings

  1. Go to [Setting] > [Languages And Input] > [Languages].
  2. Click "Add a language" and select your desired language.

2.7. Left and Right Door Settings

Configure door settings based on your vehicle's steering wheel position:

  • Go to [Setting] > [Driver's Door position] > [Rear Door Exchange].
  • For left-hand drive cars, select [Left] - [off].
  • For right-hand drive cars, select [Right] - [on].

2.8. Temperature Unit Switch

To change the temperature unit (e.g., Celsius/Fahrenheit):

  1. Go to [Setting] > [Factory] > [3368] > [Original Car Agreement].
  2. Click "Temperature unit switch" to change the unit.

2.9. Mileage Unit Switching

To change the mileage unit:

  1. Go to [Setting] > [Factory] > [3368] > [Original Car Agreement].
  2. Click "Mileage unit switching" to change the unit.

3. CarPlay & Android Auto

The unit supports both Wireless CarPlay and Wired Android Auto for seamless smartphone integration.

CarPlay and Android Auto Connection

Image: CarPlay and Android Auto connection methods via Bluetooth and USB.

3.1. Wireless CarPlay (for iPhone)

Connect your iPhone to the car stereo for navigation, calls, messages, and music.

  1. Connect your iPhone to the machine via Bluetooth.
  2. Click the "Car Link 2.0" app icon to enter.
  3. When your iPhone prompts "Allow using CarPlay when it is locked", click "Allow".

3.2. Wired Android Auto (for Android Smart Phone)

Connect your Android phone to the unit via USB for navigation, media, and apps.

  1. Connect your Android Phone to the device using a USB data cable.
  2. Click the "Car Link 2.0" app icon to enter.
  3. Connect your Phone to the car stereo's Android Auto USB port by using the Phone USB cable.
  4. When your Phone prompts "Allow using Android Auto when it is locked", click "Allow".

4. Split Screen Multitasking

The unit supports split-screen display, allowing you to run two applications simultaneously.

Split Screen Display Feature

Image: Split-Screen Display showing two applications running side-by-side.

  1. Click the "running apps" icon on the status bar to view all running apps.
  2. Press and hold the "running apps" icon for 3 seconds.
  3. When two apps appear on the right screen, tap to select your preferred app to finish split-screen setup.

5. Boot Logo Setting

You can customize the boot logo of the device.

  • Picture resolution and image format: PNG or BMP.
  • For 10.33-inch displays: Resolution not less than 1600x720P.
  • For 12.3-inch displays: Resolution not less than 2400x900P.
  • Store pictures in the "mycar" folder in the root directory of a USB disk. Insert the USB disk into the machine's USB interface.
  • Go to [Settings] > [Boot Screen Logo]. Click the buttons on the right side of the screen to select a picture.

6. DSP Equalizer

Adjust audio settings for optimal sound quality.

  • Click the "DSP/ASP/Field" icon to enter the settings interface.
  • Adjust equalizer bands, sound effects, and other audio parameters.

7. Other Features

  • App Store Support: Download and install any app from the Play Store (Google Map, YouTube, Email, Facebook, etc.).
    App Store Support

    Image: Device supporting various apps from the Play Store.

  • Steering Wheel Control: Control functions directly from your vehicle's steering wheel for convenience.
    Steering Wheel Control

    Image: Steering wheel with control buttons.

  • 4G & WiFi Support: Supports LET 4G SIM card (slot on the back of the radio) and Wi-Fi for high-speed internet access and online media. (Note: Some memory configurations may not have 4G functionality).
    4G and WiFi Support

    Image: Device displaying 4G and WiFi connectivity.

  • Bluetooth: Enhanced compatibility for the latest Bluetooth devices, providing high audio quality for hands-free calls and music streaming.
    Bluetooth Functionality

    Image: Bluetooth interface for calls and music.

  • Video Out Support: Share the screen from the car radio to headrest monitors for rear seat passengers. (Note: Video output cables are not included and must be purchased separately).
    Video Out Feature

    Image: Car multimedia screen displaying video output to rear headrest monitors.

  • ADAS DVR Support: Capture events that occur while driving with ADAS (Advanced Driver-Assistance Systems) functionality for safer driving. (ADAS DVR is not included).
  • DAB+ Support: EU DAB+ Radio Universal for all Android radios, providing better sound quality and stronger signal in EU countries. (DAB+ is not included).

Maintenance

  • Cleaning: Use a soft, dry cloth to clean the screen and exterior. Avoid abrasive cleaners or solvents.
  • Software Updates: Periodically check for software updates to ensure optimal performance and access to new features. Updates can usually be found on the manufacturer's website or through the device's settings.
  • Environmental Conditions: Avoid exposing the unit to extreme temperatures, direct sunlight for prolonged periods, or high humidity.
  • Cable Connections: Ensure all cables are securely connected. Loose connections can lead to intermittent issues.

Troubleshooting

If you encounter any issues, please refer to the following common troubleshooting steps:

  • No Power: Check all power connections. Ensure the vehicle's ignition is on. Verify fuses.
  • No Sound: Check speaker connections. Ensure the volume is not muted or set too low. Verify AUX settings are correct (refer to Operating Instructions).
  • Touch Screen Unresponsive: Try restarting the unit. Ensure the screen is clean and free from obstructions.
  • GPS Signal Issues: Ensure the GPS antenna is installed in an open position with a clear view of the sky. Avoid areas with signal interference.
  • CarPlay/Android Auto Not Connecting: Ensure Bluetooth is enabled on your phone and the unit. For wired Android Auto, try a different USB cable or port. Confirm "Allow" prompt on your phone.
  • Error Message on Screen: If an error message appears during installation, especially related to cables, recheck all cable connections, particularly the airbag cable and ensure they are in the correct ports.
  • Lagging Performance: Close unnecessary background applications. Ensure sufficient storage space.

If problems persist, please contact customer support for further assistance. You may be asked to provide your unit's software version (found in [Menu] > [Setup MMI] > [Version information]).

Specifications

FeatureSpecification
Brand NameCUCU-NAVI
Display Size9"
Resolution1024*600p
Operating SystemAndroid
RAM4G/8G
ROM32G/64G/128G
Max External Memory128G
Special FeaturesWiFi function, Built-in GPS, MP3 players, CarPlay, Android Auto, Reversing Input, Split Screen, Support steering wheel control
Digital Media FormatMp3, MP4, WMA, JPEG
OSD LanguageMulti-language support (Chinese, Arabic, English, French, German, Italian, Japanese, Korean, Portuguese, Russian, Spanish, etc.)
Voltage12 V
Item Weight2 kg
Material TypeIPS+ABS
Tuner TypeRDS
Built-in CD playerNo
Is touch screenYes
Built-in ScreenYes
DinOne Din
OriginMainland China
For Vehicle Brands/ModelAudi
CertificationCE, FCC, RoHS
Warranty1 year

User Tips

  • The head unit operates quickly and smoothly with no noticeable lag, providing an excellent user experience.
  • The screen offers clear visuals, both day and night, and fits well without causing glare during driving.
  • CarPlay connects quickly, enhancing convenience for navigation, calls, and music.
  • Consider professional installation if you are not confident with car electronics, although many users found the plug-and-play aspect straightforward.
  • Ensure to verify your car's specific model and existing head unit type (e.g., RMC, MHI2, HNR) to select the correct version and ensure compatibility.
  • If you encounter installation issues, the seller is generally responsive and helpful in resolving problems.

Warranty and Support

This product comes with a 1-year warranty. For any technical support, troubleshooting, or warranty claims, please contact the seller or manufacturer directly.

You can also refer to the official user manual PDF for more detailed information: View User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.