1. Introduction
The GuliKit ES Pro E-sports Controller is a high-performance wireless gamepad designed for a superior gaming experience across multiple platforms. It features advanced TMR joysticks for anti-drift and high precision, 256-level Hall Effect triggers for durability, and a tactile switch D-pad for sensitive and accurate input. The controller supports a wide range of devices including PC, Android, iOS, macOS, Nintendo Switch, and the upcoming Switch 2, with a special wake-up capability for Switch consoles.
Key Features:
- World's Fastest Wireless Controller with low latency (1000Hz wired, 730Hz Bluetooth polling rate).
- Support Switch / Switch 2 Wakeup.
- TMR Joysticks: Anti-Drift, Long-lasting Durability, 4000-Level High Precision.
- 256-Level Hall Effect Triggers: High Precision, Long-lasting Durability.
- 3 Levels of Adjustable Joystick Sensitivity.
- Non-physical A-B/X-Y Button Swap between PC-layout and Switch-layout functions.
- Joystick Deadzone Off/On Adjustable.
- Asymmetric Dual-rotor Vibration Motors with 3-level intensity adjustment.
- Supports Semi-Auto and Full-Auto Continuous Fire (Turbo).
- Six-axis Gyroscope for motion controls.
- Multi-platform compatibility: PC, Android, iOS, macOS, Switch, Switch 2.
- Built-in Smooth Joystick Stand for ultra-smooth feel.
- 950mAh Polymer Battery for up to 30 hours of gameplay.

GuliKit ES PRO E-sports Controller highlighting its main features and multi-platform compatibility.
2. Safety Information
CAUTION!
This product contains small parts (such as buttons, joystick caps, and screws) that may pose a choking hazard if swallowed by children. Please keep the controller and its accessories out of reach of small children.
3. Product Overview
Controller Layout:

Front view of the GuliKit ES Pro Controller.

Top view of the GuliKit ES Pro Controller.

Back view of the GuliKit ES Pro Controller.
Buttons and Indicators:
- USB-C Port: For charging and wired connection.
- Indicator Light:
- Orange: Charging
- Green: Fully charged
- Flashing light: Pairing mode
- Solid White: No custom settings configured
- Solid Blue: Custom settings configured
- Power-Off Button: Press to power on, press and hold to power off.
- Home Button: Used for system functions and waking up consoles.
- Setting Button: Used in combination with other buttons for customized settings.
- Pairing Button: Press and hold to enter pairing mode.
- Mode Switch: Slide switch to change controller mode (PC/NS).
The controller will automatically power off after 15 minutes of inactivity. When connected via USB or if Auto-Continuous Fire (Turbo) is active, the controller will not power off.
4. Setup
4.1 Charging the Controller
Connect the included USB-C to USB-A cable to the USB-C port on the controller and the other end to a USB power source (e.g., computer, wall adapter). The indicator light will show orange while charging and turn green when fully charged.
4.2 Pairing Methods
4.2.1 Bluetooth Pairing with PC (730Hz Polling Rate)
- Ensure your computer has Bluetooth functionality.
- Switch the controller to PC mode using the slide switch on the back.
- Press and hold the pairing button for 2 seconds until the indicator light begins flashing rapidly. This indicates pairing mode has started.
- On your computer, open Bluetooth settings, search for new devices, and select "GuliKit XW Controller" to pair.
- Once the interface displays "Connected", the pairing is complete.
4.2.2 Wired Connection with PC (1000Hz Polling Rate)
- Set the controller to PC mode.
- Connect one end of the USB-C to USB-A data cable to the controller, and insert the other end into a USB-A port on your computer.
- For desktop computers, it is recommended to use one of the USB ports on the back of the computer case for a more stable connection.
4.2.3 Wireless Pairing with Android Devices
- Set the controller to PC mode.
- Press and hold the pairing button for 2 seconds until the indicator light starts blinking quickly, indicating that pairing mode has been activated.
- On your phone, go to Bluetooth settings, search for new devices, and select "GuliKit XW Controller".
- The interface displays "Connected" to the new controller, indicating that the pairing is complete.
4.2.4 Pairing with Nintendo Switch / Switch 2 (Special Wake-up Method)
This method ensures the Switch 2 wake-up function works correctly. Please make sure to update to the latest firmware on the GuliKit website.
- Set the controller to NS mode using the slide switch on the back, then turn it on.
- Press and hold the pairing button for 2 seconds. The indicator light will blink quickly, indicating that pairing has started.
- When the Switch / Switch 2 is in the black screen (sleep) state, press the HOME button on a Joy-Con to wake it up.
- It will then enter the controller pairing interface.
- Once the interface shows that a new controller is connected, the pairing is complete.
Important Note:
Pairing by the regular way without setting Switch 2 into sleep mode first will cause the controller to pair, but the Switch 2 wake-up support will not function.
Video demonstrating the special pairing method for Switch 2 wake-up.

Visual guide for the special pairing method for Switch 2 wake-up.
5. Operating Instructions
All customized settings mentioned below require holding the Setting button while pressing the corresponding buttons.
When customized settings are configured, the indicator light will turn blue. When no customized settings are configured, the indicator light will remain white. When the battery is low, the indicator light will flash, and the vibration function will automatically turn off. Once the battery level is restored, vibration will turn back on automatically.
5.1 Joysticks Calibration
While the controller is powered on, press and hold the "L," "R," "D-pad Left," and "B" buttons simultaneously for 6 seconds to enter calibration mode. During calibration, rotate both the left and right joysticks in full circles 2 to 3 times. Once calibration is complete, the controller will vibrate once to indicate success and will automatically exit calibration mode.
5.2 Gyroscope Calibration
While the controller is powered on and placed on a flat surface, press and hold the "+", "-", "D-pad Left", and "B" buttons simultaneously to initiate automatic gyroscope calibration. Once calibration is complete, the controller will vibrate once to indicate success. Calibration is not necessary when the gyroscope is functioning normally.
5.3 Customized Settings
- Clear All Settings (Reset): Press and hold Setting + Power-Off Button. A long vibration indicates that the reset process is complete and the controller has been restored to its default settings.
- Joystick Dead Zone Setting: Press and hold Setting + A Button. One vibration: Dead zone enabled on joysticks. Long vibration: Dead zone disabled on joysticks (Default).
- Continuous Fire (Turbo) Setting: Press and hold Setting + ZR Button. One vibration: Manual Turbo Mode (continuous fire while holding, stops when released). Two vibrations: Auto Turbo Mode (press once to start, press again to stop). Long vibration: Disables both manual and auto turbo modes (Default).
- A-B X-Y Button Swap: Press and hold Setting + Screenshot Button. One vibration: Swaps the input functions of the A-B and X-Y buttons. Long vibration: Restores the default button assignments (Default).
- Adjust Vibration Intensity: Press and hold Setting + D-pad Up/Down. One vibration: Weak vibration. Two vibrations: Standard vibration (Default). Three vibrations: Strong vibration. Long vibration: Turn off vibration.
- Adjust Joystick Sensitivity: Press and hold Setting + R3/L3 (press down on joystick). One vibration: Sensitivity 50%. Two vibrations: Sensitivity 100% (Default). Three vibrations: Sensitivity 150%. Each joystick can be configured individually.
- Set 4-Direction Mode on D-Pad: Press and hold Setting + D-pad Right. One vibration: Switches the D-pad to 4-direction mode. Long vibration: Restores the default 8-direction mode (Default).
- Adjust Motion Aim Assist for PC FPS Games: Press and hold Setting + ZL Button. One vibration: Low-sensitivity aim assist. Two vibrations: Medium-sensitivity aim assist. Three vibrations: High-sensitivity aim assist. Long vibration: Motion aim assist disabled (Default). Activation settings: Setting + L (Motion assist activates while holding L button), Setting + ZL (Motion assist activates while holding ZL trigger).
6. Specifications
| Feature | Specification |
|---|---|
| Brand Name | GuliKit |
| Model Number | GuliKit ES Pro E-sports Controller |
| GuliKit Model | ES PRO |
| Type | Gamepads |
| Compatible Platform | Nintendo Switch, Nintendo Switch 2, PC, Android, iOS, Steam, Raspberry Pi |
| Compatible Nintendo Model | Nintendo Switch 2, Nintendo Switch, Nintendo Switch OLED, Nintendo Switch Lite |
| Interface Type | Bluetooth, Type C |
| Battery Included | Yes |
| Battery Capacity | 950mAh Polymer Battery |
| Hall Effect | Yes |
| Joystick Sensor Module Brand/Type | TMR Joysticks |
| Trigger Button Type | Hall-Linear (256-level) |
| D-pad Switch Type | Tactile switch |
| ABXY Switch Type | MEMBRANE (Gen-2 Conductive Rubber) |
| Bumpers Switch Type | MEMBRANE |
| Vibration | Rotor vibration (Asymmetric Dual-rotor) |
| Polling Rate (Wired) | 1000Hz |
| Polling Rate (Bluetooth) | 730Hz |
| Switch 1 Wakeup | Yes |
| Switch 2 Wakeup | Yes |
| Motion Control on Switch/Switch 2 | Yes (Six-axis Gyroscope) |
| PC Motion Aim Control | Yes |
| Joystick Sensitivity Adjustment | Yes (3 Levels) |
| D-pad 8-direction / 4-direction Switch | Yes |
| USB-C Charging Cable | Included |
| Non-physical A-B/X-Y Button Swap | Yes |
| Package | Yes |
| Package Dimensions (L x W x H) | 20 cm x 20 cm x 10 cm |
| Package Weight | 0.4 kg |
| Origin | Mainland China |
| Certification | CE |

Detailed comparison of GuliKit ES and ES PRO controller specifications.
7. Maintenance
To ensure the longevity and optimal performance of your GuliKit ES Pro controller, please follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to clean the controller. For stubborn dirt, a slightly damp cloth can be used, but ensure no moisture enters the device. Avoid using harsh chemicals or abrasive cleaners.
- Storage: Store the controller in a cool, dry place away from direct sunlight and extreme temperatures.
- Handling: Avoid dropping the controller or subjecting it to strong impacts, as this can damage internal components.
- Battery Care: To preserve battery life, avoid fully discharging the controller frequently. If storing for an extended period, charge the battery to about 50% and recharge every few months.
8. Troubleshooting
- Unstable PC Wired Connection: If using a desktop computer, try connecting the USB-C cable to one of the USB ports on the back of the computer case for a more stable connection.
- Gyroscope Malfunction: If the gyroscope is not functioning correctly, perform a gyroscope calibration (see section 5.2). Calibration is not necessary if it's working normally.
- Controller Not Waking Up Switch 2: Ensure you followed the special pairing method for Switch 2 wake-up (see section 4.2.4). Pairing without putting the Switch 2 into sleep mode first will prevent the wake-up function from working. Also, ensure your controller has the latest firmware.
- Controller Stuck/Unresponsive after Mode Switch: If the controller sometimes gets stuck when turning on and connecting in PC mode after using it on Switch, try turning the controller off and on again to resolve the issue.
- A Button Rattles: Some users have reported a noticeable rattle from the A button during vibration. This might be a minor quality control issue and typically does not affect functionality.
- Firmware Update for Steam: If you plan to use this controller with Steam, it is recommended to update the firmware upon receipt. Firmware updates are generally simple and do not require special software or drivers, making them compatible with various operating systems like Linux or Mac.
9. User Tips
- Gyroscope Sensitivity: The gyroscope is very precise and fast. You may need to lower the sensitivity in your console/game settings to avoid feeling dizzy, especially in fast-paced games.
- D-pad for Fighting Games: The D-pad design, while initially unorthodox, has been praised by users for its effectiveness in fighting games like Street Fighter and Gundam VS.
- Controller Size and Weight: The ES Pro controller is noted to be a comfortable size for larger hands, slightly smaller than an Xbox controller, and lighter than the Switch Pro 2 controller.
- Packaging: The product often comes well-packaged, sometimes with a plastic bubble wrap, ensuring the box and contents arrive in good condition.
- Physical Button Swap: While the controller supports non-physical A-B/X-Y button swapping, physical Switch-layout keycaps for physical swap are sold separately.
10. Warranty and Support
For further questions, technical support, or warranty information, please visit the official GuliKit website. You can find a dedicated "Support" section with Frequently Asked Questions (FAQ) related to your controller.
Official Website: www.gulikit.com
A user manual in PDF format is also available for download: GuliKit ES Pro Controller User Manual (PDF)