1. Introduction
Thank you for choosing the SHKD HOKASDA M8 Dual Lens Dash Cam. This device is designed to provide reliable front and interior recording for your vehicle, enhancing driving safety and providing evidence in case of incidents. Featuring 1080P Full HD recording, a wide-angle lens, G-sensor, loop recording, night vision, and WiFi connectivity, the M8 dash cam offers comprehensive surveillance. Please read this manual carefully before use to ensure proper installation and operation.
2. Package Contents
Please check the box for the following items:
- 1x SHKD HOKASDA M8 Dual Lens Dash Cam
- 1x User Manual
- 1x Car Charger
- 1x Suction Cup Holder
3. Product Overview
The M8 Dash Cam features a compact design with dual lenses for simultaneous front and interior recording. It includes a 3.16-inch HD screen for real-time viewing and playback, and intuitive push-button controls.
4. Setup
4.1. Inserting the Memory Card
The M8 Dash Cam requires a TF (MicroSD) card for recording. Ensure the card is Class 10 or higher for optimal performance. The device supports memory cards up to 128GB.
- Locate the memory card slot on the side of the dash cam.
- Gently insert the TF card with the gold contacts facing the back of the camera until it clicks into place.
- To remove, push the card in slightly until it springs out.
4.2. Mounting the Dash Cam
Use the provided suction cup holder to securely mount the dash cam on your vehicle's front windshield.
- Clean the area on your windshield where you intend to mount the dash cam.
- Attach the suction cup holder to the dash cam.
- Press the suction cup firmly against the windshield and flip the lever to secure it.
- Adjust the angle of the dash cam to ensure a clear view of the road ahead and the vehicle's interior.
4.3. Power Connection
Connect the dash cam to your vehicle's power supply using the included car charger.
- Plug the small end of the car charger cable into the dash cam's power port.
- Plug the larger end of the car charger into your vehicle's cigarette lighter socket.
- Route the cable neatly to avoid obstructing your view or interfering with driving.
5. Operating Instructions
5.1. Power On/Off
The M8 Dash Cam is designed for automatic operation. It will power on and begin recording automatically when your vehicle's ignition is turned on, and power off when the ignition is turned off.
5.2. Recording Modes
- Continuous Loop Recording: The dash cam records video in seamless loops. When the memory card is full, it automatically overwrites the oldest non-essential video files to make space for new recordings.
- G-Sensor (Emergency Recording): In the event of a sudden impact or collision, the built-in G-sensor will automatically detect the event and lock the current video file, preventing it from being overwritten by loop recording.
- Night Vision: The dash cam features enhanced night vision capabilities to ensure clear recordings even in low-light conditions.
5.3. WiFi Connectivity
The M8 Dash Cam supports WiFi connectivity, allowing you to connect your smartphone to the dash cam for easy access to recordings, settings, and live view via a dedicated app. Refer to the app's instructions for detailed connection steps.
5.4. Reversing Assist
When connected to a compatible reverse camera (if applicable to your model), the dash cam can automatically switch to reversing image mode when you engage reverse gear, providing visual assistance to avoid blind spots during parking.
6. Maintenance
6.1. Cleaning the Device
To maintain optimal performance, regularly clean the dash cam's lenses and screen.
- Use a soft, lint-free cloth to wipe the lenses and screen.
- For stubborn smudges, slightly dampen the cloth with water or a lens cleaning solution.
- Avoid using harsh chemicals or abrasive materials that could scratch the lenses or screen.
6.2. Memory Card Management
It is recommended to format the memory card periodically (e.g., once a month) to prevent data corruption and ensure smooth recording. This can usually be done through the dash cam's settings menu. Back up any important recordings before formatting.
7. Troubleshooting
If you encounter issues with your M8 Dash Cam, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Dash cam does not power on. | No power supply; faulty car charger; loose connection. | Check car charger connection; ensure vehicle's cigarette lighter socket is working; try a different power source if available. |
| Recording stops or freezes. | Memory card full or corrupted; slow memory card; G-sensor sensitivity too high. | Format the memory card; use a Class 10 or higher TF card; adjust G-sensor sensitivity in settings. |
| Poor video quality. | Dirty lens; protective film still on lens; low light conditions. | Clean the lenses; remove any protective film; ensure night vision is active in low light. |
| WiFi connection issues. | Incorrect app settings; interference; dash cam WiFi not enabled. | Ensure WiFi is enabled on the dash cam; restart both devices; check app instructions for connection steps. |
| Date/Time is incorrect. | Settings not saved; internal battery low. | Set the date and time in the settings menu and ensure they are saved. Keep the dash cam powered for a while to charge its internal battery. |
8. Specifications
| Feature | Detail |
|---|---|
| Product Name | Driving Recorder |
| Product Model | M8 |
| Brand Name | SHKD HOKASDA |
| Assembly Mode | Portable Recorder |
| Chipset Manufacturer | MediaTek |
| Video Resolution | 1920x1080 (1080P Full HD) |
| Frames Per Second (FPS) | 20 |
| Photo Resolution | 5 Million |
| Screen | 3.16-inch HD IPS Screen |
| Shooting Angle | 140 degrees |
| Main Lens Aperture | F20 |
| Number of Lenses | Multi-lens (Dual Lens Front and Interior/Rear) |
| Memory Card Support | TF card (MicroSD), up to 128GB (Class 10 or higher recommended) |
| Data Storage Time | Loop recording |
| Data Transmission Interface | USBAV |
| Network Type | WIFI |
| Installation Location | Front windshield |
| Operation Mode | Push Button |
| Is Batteries Included | No |
| Single Set Weight | 230g |
| Color Box Size | 16.5 x 11.5 x 7.5 cm |
9. User Tips
- Optimal Card Choice: Always use a high-quality Class 10 or U3 speed rated MicroSD card from a reputable brand to ensure reliable recording, especially for high-resolution video.
- Regular Formatting: Format your memory card monthly to prevent file corruption and maintain optimal performance. This can be done through the dash cam's settings.
- G-Sensor Sensitivity: Adjust the G-sensor sensitivity to an appropriate level for your driving conditions. Too high a sensitivity might lead to too many locked files from minor bumps, filling up your card quickly.
- Cable Management: Properly route the power cable along the windshield trim and under the dashboard to keep it out of sight and prevent it from interfering with driving.
- Parking Monitoring: If your model supports parking monitoring, ensure it's correctly configured and powered (e.g., via a hardwire kit, if required) to protect your vehicle while parked.
10. Warranty and Support
The SHKD HOKASDA M8 Dash Cam comes with a standard manufacturer's warranty. For specific warranty terms, duration, and conditions, please refer to the warranty card included in your package or contact the seller directly. For technical support, troubleshooting assistance beyond this manual, or inquiries about replacement parts, please reach out to the customer service department of your retailer or the manufacturer.