ECHTPower Phantom Wireless Gamepad (EP05) User Manual

1. Introduction

Thank you for choosing the ECHTPower Phantom Wireless Gamepad, model EP05. This advanced controller is designed to enhance your gaming experience across multiple platforms, including PC, Nintendo Switch, Android, and iOS devices. Featuring innovative Hall Effect joysticks for precision and durability, a smart screen for easy settings adjustment, customizable back buttons, and adjustable vibration and RGB lighting, the EP05 offers unparalleled control and immersion. Please read this manual thoroughly to ensure proper setup and optimal use of your new gamepad.

2. Packing List

Please check the contents of your package to ensure all items are present:

• Wireless Controller (EP05) x 1
• Charging Cable (Type-C) x 1
• Receiver x 1
• Instruction Manual x 1

3. Specifications

4. Controller Layout and Button Map

Familiarize yourself with the buttons and features of your EP05 Gamepad.

Front View:

• Display Screen: Central screen for settings and information.
• /SE Button: Select/Share button.
• /ST Button: Start button.
• Left Joystick: Analog stick for movement.
• Right Joystick: Analog stick for camera/aiming.
• ABXY Buttons: Standard action buttons (Y, X, B, A).
• Turbo Button: For activating rapid-fire functions.
• Screen Button: For taking screenshots.
• Home Button: Accesses the controller's main menu (hold for 3 seconds).
• Power Switch: ON/OFF toggle.
• D-Pad / Menu Buttons: Directional pad for navigation and menu selection.

Top/Bottom View:

• R1/L1 Joysticks: Shoulder buttons.
• R2/L2 Joysticks: Trigger buttons.
• TYPE-C Charging Port: For charging the controller.
• 3.5 Audio Jack: For connecting headphones.
• Reset Button: Pinhole for factory reset.

Back View:

• Lock: Trigger lock switches.
• M1/M2: Mappable back buttons.

5. Setup and Connection

5.1 Initial Use

Before using your gamepad for the first time, please connect the included Type-C charging cable and fully charge the controller. The charging port is located on the top edge of the controller.

5.2 Switch Connection

1. Turn the power switch to "ON".
2. Press and hold the HOME button for 3 seconds to enter the controller's menu.
3. Use the D-PAD to navigate to "Mode", then press R1 to confirm.
4. Select "SW" (Switch mode) and press R1 to confirm. Press L1 to go back to the previous screen if needed.
5. Wait for the startup animation to appear. Follow the prompt: press and hold the HOME button for 3 seconds to access the menu again.
6. On the menu screen, navigate to "Pairing" and press R1 to confirm.
7. On your Nintendo Switch console, go to "Controllers" > "Change Grip/Order" and complete the pairing process.

5.3 Wireless Receiver Connection (PC-Xinput)

1. Turn the power switch to "ON".
2. Press and hold the HOME button for 3 seconds to enter the controller's menu.
3. Use the D-PAD to navigate to "Mode", then press R1 to confirm.
4. Select "Receiver" and press R1 to confirm. Press L1 to go back.
5. Wait for the startup animation to appear. Follow the prompt: press and hold the HOME button for 3 seconds to access the menu again.
6. On the menu screen, navigate to "Pairing" and press R1 to confirm.
7. Insert the receiver into an available USB port on your PC.
8. Press and hold the button on the top of the receiver for 1 second to complete the pairing.

5.4 Wireless Receiver Connection (PC-Dinput / Switch Pro Mode)

• When connected to PC in Xinput mode via the receiver, press and hold the D-PAD Left and D-PAD Right buttons simultaneously for 5 seconds to switch the controller to Dinput mode.
• Press the same button combination (D-PAD Left + D-PAD Right) again for another 5 seconds to further switch to Switch Pro mode.

5.5 Bluetooth PC Connection

1. Turn the power switch to "ON".
2. Press and hold the HOME button for 3 seconds to enter the controller's menu.
3. Use the D-PAD to navigate to "Mode", then press R1 to confirm.
4. Select "PC" and press R1 to confirm. Press L1 to go back.
5. Wait for the startup animation to appear. Follow the prompt: press and hold the HOME button for 3 seconds to access the menu again.
6. On the menu screen, navigate to "Pairing" and press R1 to confirm.
7. On your PC, enable Bluetooth in the settings, then select "Xbox Wireless Controller" from the list of available devices to complete pairing.

5.6 Wired PC Connection

Turn the power switch to "ON", then connect the controller directly to your computer using the included USB cable. The controller will automatically configure itself for PC compatibility upon detection.

5.7 Bluetooth Phone Connection (Android/iOS)

1. Turn the power switch to "ON".
2. Press and hold the HOME button for 3 seconds to enter the controller's menu.
3. Use the D-PAD to navigate to "Mode", then press R1 to confirm.
4. Select "Phone" and press R1 to confirm. Press L1 to go back.
5. Wait for the startup animation to appear. Follow the prompt: press and hold the HOME button for 3 seconds to access the menu again.
6. On the menu screen, navigate to "Pairing" and press R1 to confirm.
7. On your smartphone, enable Bluetooth in the settings and select "Xbox Wireless Controller" from the list of available devices to complete pairing.

6. Operating Instructions

6.1 Language Selection

1. Turn the power switch to "ON".
2. Press and hold the HOME button for 3 seconds to enter the controller's menu.
3. Use the D-PAD to navigate to the "Language" option, then press R1 to confirm.
4. Select your preferred language and press R1 to confirm. Press L1 to go back to the main menu.

6.2 Controller Calibration

If you experience issues with joystick or trigger accuracy, perform a calibration:

1. Ensure the controller is powered OFF.
2. Simultaneously press and hold the A + X buttons, then switch the controller to the "ON" position.
3. The controller will enter calibration mode, indicated by red/blue LED lights flashing at a rate of 2 times per second.
4. While in calibration mode:
• Rotate both the left and right joysticks at normal speed through 2-3 complete rotations.
• Press both the left and right triggers (L2/R2) at standard pressure for 2-3 full presses in linear mode.
5. After completing these steps, place the controller flat on a stable surface and press the "≡" (Menu) button to finalize the calibration process.
6. Upon successful calibration, the LED flashing will cease, and the controller will automatically return to its main interface.

6.3 Turbo Function Settings

The A, B, X, Y, L1, L2, R1, and R2 buttons can be configured with turbo functionality.

• Manual Turbo: Press and hold the Turbo button simultaneously with any action button to activate manual turbo mode. The selected button will auto-fire when pressed, and stop when released.
• Auto Turbo: Press the Turbo button plus the same action button again to enable automatic turbo. The button will continuously auto-fire until pressed once to toggle on/off.
• Disable Turbo: Press the Turbo button with the same action button a third time to completely cancel the turbo function of that key.
• Clear All Turbo: Hold the Turbo button for 3 seconds to disable all turbo configurations. This will be indicated by grayed-out icons on the screen.

Turbo Speed Adjustment:

• Turbo + D-Pad Up: Fast speed (16 presses/second)
• Turbo + D-Pad Right: Medium speed (8 presses/second)
• Turbo + D-Pad Down: Slow speed (4 presses/second)

6.4 Back Button Customization

You can map the following controls to the rear M1 and M2 buttons: A, B, X, Y, L1, L2, R1, R2, D-pad directions (Up/Down/Left/Right), L3, and R3.

1. Turn the power button to “ON”.
2. Press and hold the HOME button for 3 seconds to access the menu.
3. Navigate to "Macro" using the D-Pad, then press R1 to confirm.
4. Press R1 again to choose either M1 or M2.
5. Record the desired button inputs. After completing the recording, press the "≡" (Menu) button to confirm and save.
6. Once successfully saved, press the "□" (Back) button to exit. The settings will be ready for normal use.

To Reset Back Buttons:

1. Repeat the menu navigation process to enter "Macro" settings.
2. Hold the target back button (M1 or M2) you wish to clear.
3. Press the "≡" (Menu) button to save the cleared configuration.
4. Press the "□" (Back) button to exit.

6.5 Light Adjustment (RGB)

1. Turn the power button to “ON”.
2. Press and hold the HOME button for 3 seconds to access the menu.
3. Select either "Lighting Mode" or "Lighting Brightness" using the D-Pad to adjust the built-in LED effects or illumination intensity.

6.6 Vibration Adjustment

1. Turn the power button to “ON”.
2. Press and hold the HOME button for 3 seconds to access the menu.
3. Navigate to "Motor Settings" using the D-Pad, then press R1 to confirm.
4. Adjust to your preferred vibration intensity.

6.7 Volume Adjustment

1. Turn the power button to “ON”.
2. Press and hold the HOME button for 3 seconds to access the menu.
3. Navigate to the "Volume" option using the D-Pad.
4. Adjust the headphone output level as desired.

7. Troubleshooting

7.1 Controller Reset

If your controller is unresponsive or behaving unexpectedly, you can perform a reset:

• Method 1 (Physical Reset): Use a pointed tool (like a paperclip) to press the reset pinhole located on the back of the controller. This will restore the device to its original settings.
• Method 2 (Software Reset):
  1. Turn the power button to “ON”.
  2. Press and hold the HOME button for 3 seconds to access the menu.
  3. Navigate to "Reset" using the D-Pad.
  4. Press and hold the R1 button for 3 seconds to complete the reset.

7.2 Connection Issues

• Controller not connecting: Ensure the controller is fully charged. Verify that you have selected the correct connection mode (Switch, PC, Phone) in the controller's menu.
• Bluetooth pairing failure: Make sure Bluetooth is enabled on your device and the controller is in pairing mode. Forget previous pairings on your device and try again.
• Receiver not recognized: Ensure the receiver is fully inserted into the USB port. Try a different USB port.
• Input lag: Ensure the controller is within the 10-meter transmission range. Reduce interference from other wireless devices. For PC, consider using a wired connection for lowest latency.

8. Maintenance

To ensure the longevity and optimal performance of your ECHTPower Phantom Wireless Gamepad, please follow these maintenance guidelines:

• Cleaning: Use a soft, dry cloth to clean the controller. Do not use harsh chemicals or abrasive materials.
• Storage: Store the controller in a cool, dry place away from direct sunlight and extreme temperatures.
• Charging: Use only the provided charging cable or a certified Type-C cable. Avoid overcharging or completely draining the battery frequently.
• Physical Care: Avoid dropping the controller or subjecting it to strong impacts.

9. Safety Precautions

Please read and adhere to the following safety precautions:

• Do not expose the controller to liquid.
• Do not disassemble the controller. Unauthorized disassembly voids the warranty and may cause damage or injury.
• Avoid dropping the controller.
• Avoid exposing the controller to extremely high or low temperatures.
• Keep the controller away from children.

9.1 FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

FCC Warning:

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

FCC ID: 2BDA4STK-7052P

9.2 Disposal Information

The symbol (crossed-out wheeled bin) indicates that the product should not be disposed of with household waste but should be brought to an appropriate collection point to enable recycling. According to local regulations, do not dispose of the product or rechargeable battery with normal household waste. Appropriate disposal of used products and rechargeable batteries helps to prevent negative impacts on the environment and human health.

10. Compliance and Regulatory Information

10.1 Contact Information

• Tel: 0755-21010839
• Email: service@echtpower.com
• Web: www.echtpower.com
• Manufacturer: Shenzhen Mike Morgen Technology Co., Ltd
• Address: Room 302, 3rd Floor, Building 5, Zone C, Jinxiu Huacheng Science and Technology Park, No. 36 Xiangjiaotang Second Road, Xiangjiaotang Community, Bantian Street, Longgang District, Shenzhen

10.2 Declaration of Conformity (CE)

Model: EP05

The product conforms to EC standards for radio interference. Shenzhen Mike Morgen Technology Co., Ltd. announces that EP05 radio equipment conforms to the Directive EN IEC 62368-1:2020+A11:2020; EN 50663:2017, EN 62479:2010; ETSI EN 301 489-1 V2.2.3(2019-11); ETSI EN 301 489-17 V3.2.4(2020-09); ETSI EN 300 328 V2.2.2(2019-07).

The full text of the EU Declaration of Compliance can be found on: www.echtpower.com

10.3 UKCA Declaration of Conformity

The product conforms to UK standards for radio interference. Shenzhen Mike Morgen Technology Co., Ltd. announces that EP05 radio equipment conforms to the Directive EN IEC 62368-1:2020; BS EN 50663:2017, BS EN 62479:2020; ETSI EN 301 489-1 V2.2.3(2019-11); ETSI EN 301 489-17 V3.2.4(2020-09); ETSI EN 300 328 V2.2.2(2019-07).

The full text of the UKCA Declaration of Compliance can be found on: www.echtpower.com

10.4 Hazardous Substances Content Table

This table indicates the presence of hazardous substances in the product components, in accordance with SJ/T 11364 regulations.

○: Indicates that the concentration of the hazardous substance in all homogeneous materials for this part is below the limit requirements of GB/T26572.

X: Indicates that the concentration of the hazardous substance in at least one homogeneous material for this part exceeds the limit requirements of GB/T26572, and there is currently no mature alternative in the industry that complies with the EU RoHS directive.

The number '10' on the product indicates that the environmental protection use period of the product under normal operating conditions is 10 years.

11. Warranty and Support

For after-sales service, please fill out the product warranty card according to your actual situation and return it along with the product requiring after-sales service. Thank you!

11.1 Product Warranty Card

Please check the reason for after-sales service:

• Functionality issue
• Unsatisfactory appearance
• Uncomfortable feel
• Incomplete tutorial, don't know how to operate
• Other (please specify):

If 'Other' or 'Functionality issue' is selected, please specify the game you are trying to play:

Please select your desired after-sales option:

• Replacement
• Repair
• Return

Please provide your valuable suggestions:

11.2 Required Information (All fields are mandatory)

• Order Number:
• User Name:
• Contact Name:
• Return Address:

11.3 After-Sales Service Address

Shenzhen Longgang District, Bantian Street, Xiangjiaotang Second Road, Jinxiu Huacheng Science and Technology Park, Zone C, Building 5, 3rd Floor, Room 302.

12. Product Video

Watch this video for a visual overview of the ECHTPower Phantom Wireless Gamepad's features and functionality.