1. Introduction
This document provides important safety information, usage instructions, and technical specifications for the ESP32-P4 ESP32-C6 4.3 inch Capacitive Touch Screen Display Development Board. This product is an advanced development board integrated with ESP32-C6, supporting Wi-Fi 6 and Bluetooth 5 wireless connectivity. It offers a wide range of human-machine interface options, including MIPI-CSI (with an integrated image signal processor ISP), MIPI-DSI, SPI, I2S, I2C, LED PWM, MCPWM, RMT, ADC, UART, and TWAI. Additionally, it supports USB OTG 2.0 HS.
The ESP32-P4 features a 360MHz dual-core RISC-V processor, supports up to 32MB of PSRAM, and includes peripherals such as USB 2.0, MIPI-CSI/DSI, and H.264 encoding, making it ideal for low-cost, high-performance, and low-power multimedia development needs. Additionally, the ESP32-P4 integrates a digital signature peripheral and a dedicated key management unit to ensure data and operational security.
2. Safety & Warnings
WARNING: To reduce the risk of injury, fire, electric shock, or property damage, please read and follow all safety information and instructions before using this product.
- This product is intended for users aged 16 years and above.
- Not suitable for children under 3 years. Small parts may present a choking hazard.
- Keep away from fire, high temperature, water, moisture, and corrosive environments.
- Do not disassemble, modify, or repair the product without authorization.
- Use the product only for its intended purpose. Misuse may cause injury or damage.
- If the product (especially electronic parts) is damaged, overheated, emits smoke, unusual odor, or noise, stop using it immediately and contact support.
- Keep packaging materials (plastic bags, foam, etc.) away from children to avoid suffocation risk.
- For indoor use only unless otherwise specified on the product or packaging.
3. Key Features
- High-performance MCU with RISC-V 32-bit dual-core and single-core processors.
- 128KB HP ROM, 16KB LP ROM, 768KB HP L2MEM, 32KB LP SRAM, 8KB TCM.
- Robust image and audio processing capabilities, with image and audio processing interfaces including a JPEG codec, pixel processing accelerator (PPA), image signal processor (ISP), and H.264 video encoder.
- 32MB PSRAM stacked within the chip package, with 16MB Nor Flash integrated into the module.
- On-board interfaces for MIPI-CSI, MIPI-DSI, USB 2.0 OTG, and SDIO 3.0 SD common peripheral interfaces.
- Security mechanisms: Secure boot, Flash encryption, hardware encryption accelerator, and hardware random number generator. Additionally, it supports hardware access protection, enabling access per-mission management (APM) and permission separation.
4. Components Overview
The development board features a variety of interfaces for flexible expansion and development.
- Microphone
- MX 1.25 2P speaker interface
- MX 1.25 2P lithium battery interface
- Full-speed Type-C
- High-speed Type-C
- 2*13 2.54 pin header
- MX 1.25 4P UART0
- Camera interface
- MX 1.25 4P UART interface
- MX 1.25 4P 485 interface
- HS 1.0 2P I2C interface
- ESP32P4+ESP32-C6 core board
5. Setup Instructions
- Preparation: Remove all protective films or packaging materials from the development board.
- Power Supply: Connect the provided cable to a certified 5V power adapter.
6. Operating Instructions
- Power On: Press and hold the power button for 3 seconds.
- Operation: Short press the button to cycle through functions or interact with the display.
- Intended Use: Use the product only as described in this manual and for development purposes.
7. Maintenance & Storage
Cleaning
- Turn off the device before cleaning.
- Use a soft, lint-free cloth. Do not use harsh chemicals or abrasive materials.
Storage
- Store in a dry place at room temperature (15°C-35°C).
- Keep away from direct sunlight and moisture.
Long-term Storage
- If not used for a long time, charge the device to 50% every 3 months (to protect battery life).
8. Troubleshooting
This section provides general guidance for common issues. For more complex problems, please contact customer support.
- Device not powering on: Ensure the power cable is securely connected to a certified 5V power adapter. Press and hold the power button for at least 3 seconds.
- Display not responding: Check if the device is powered on. If the screen is frozen, try restarting the device by holding the power button until it turns off, then power it back on.
- Connectivity issues (Wi-Fi/Bluetooth): Verify that the device is within range of the network/Bluetooth device. Ensure correct credentials are being used for Wi-Fi connections.
- Unusual behavior (smoke, odor, overheating): Immediately disconnect power and cease use. Contact customer support.
9. Technical Specifications
| Feature | Details |
|---|---|
| Model Number | JC4880P443C_I_W |
| Brand Name | DIYmalls |
| Type | IPS |
| Display Mode | 800*480 |
| Resolution | 800x480 |
| Input Voltage | 5V=1A |
| Rated Power | ≤5W |
| Material | ABS/Electronic Components |
| Operating Temperature | -10°C - 40°C |
| Recommended Age | 16+ |
| Certifications | CE, ROHS |
| Origin | Mainland China |
10. Customer Support
If you encounter any problems such as product damage, missing parts, or have questions regarding customization or bulk orders, please contact us through the following channels:
- Phone/WhatsApp/WeChat: +86 15079814066
- Email/Skype: sales02@flyfuntech.com
We will reply to you as soon as possible.
An official user manual PDF is available for download: Download User Manual (PDF)
11. Disposal & Recycling
This symbol (♻) indicates that this product should not be treated as household waste.
According to the WEEE Directive (2012/19/EU), it must be disposed of at an appropriate electronic waste collection point for recycling to prevent potential negative consequences for the environment and human health.
Dispose of packaging materials responsibly. Recycle paper, cardboard, and plastic where facilities exist.
Protect our environment. Thank you for your cooperation.