1. Introduction
This manual provides detailed instructions for the installation, setup, and operation of the Raise PSA-RZ-65 Canbus Car Stereo Harness. This harness is designed to integrate an Android 16-pin car radio with various Peugeot and Citroen vehicle models, enabling seamless communication between the new head unit and the vehicle's existing systems, including steering wheel controls and other Canbus-dependent features.
2. Compatibility
The Raise PSA-RZ-65 Canbus Car Stereo Harness is compatible with the following vehicle models and years, provided your original radio's back side matches the reference image below:
- Peugeot 3008 (2010-2019)
- Peugeot 2008 (2013-2019)
- Peugeot 307 (2010-2014)
- Peugeot 308 (2010+)
- Peugeot 407 (2009-2010)
- Peugeot 408 (2014-2019)
- Peugeot 4008 (2016-2019)
- Peugeot 607 (2009-2012)
- Peugeot 807 (2009-2014)
- Peugeot 508 (2011-2016)
- Peugeot 5008 (2017-2019)
- Peugeot Partner, ion (2010-2014)
- Citroen C3 XR (Middle/Low Trim, 2014-2019)
- Citroen DS6 (2014-2019)
- Citroen C5 (2008-2019)
- Citroen C4/C-Quatre (High Trim, 2010-2018)
- Citroen C4L (2012-2019)
Important: If your original radio's back side does not match the picture, this cable with Canbus may not be compatible with your car. Please verify compatibility before installation.
3. Package Contents
The package contents may vary depending on the specific variant purchased (Cable Only, Canbus Only, or Canbus with Cable). A typical package includes:
- Main 16-pin wiring harness
- Canbus decoder box (model P/N: G-RZ-PSA65, SW: V0129.212.06-HS, HW: BZ-GC3L-040D)
- Antenna adapter cable
4. Setup and Installation
Follow these steps to install and configure your Canbus car stereo harness:
- Pre-Installation Check: Verify that your car's original radio wiring harness has a 16-pin connector. This harness is designed for 16-pin interfaces.
- Connect the CAN Cable: Locate the 16-pin CAN plug on the wiring harness. Plug it into the corresponding 16-pin CAN socket on your Android head unit. If your head unit does not have a 16-pin CAN socket, you may need to connect the individual CAN wires as per your head unit's instructions.
- Physical Installation: Connect the main wiring harness to your new Android car stereo and the vehicle's wiring. Ensure all connections are secure.
- Canbus Software Setup (on Android Stereo):
- Turn on your Android car stereo.
- Navigate to the Settings menu.
- Look for a section like Car Info or Factory Settings.
- You may be prompted to enter a password. If you don't have it, contact your stereo vendor. Common passwords include '1234' or '8888'.
- Within the factory settings, find Protocol Setting or Canbus Settings.
- Select the correct CAN box manufacturer from the list.
- Select your specific car model and year from the available options.
- Save the settings and reboot the stereo system.
- Steering Wheel Control Learning: After the system reboots and the Canbus is correctly configured, you will need to program your steering wheel controls.
Video Guide: Canbus Update & Steering Wheel Learning
This video demonstrates how to update the Canbus version on your Android stereo, configure the protocol settings by selecting the car model, and then proceed with learning the steering wheel controls.
5. Operating Instructions
Once the harness and Canbus are correctly installed and configured, your Android car stereo should seamlessly integrate with your vehicle's systems. Key operational aspects include:
- Steering Wheel Controls: After successful 'Steering Wheel Learning' (as shown in the video), your vehicle's steering wheel buttons will control functions on your Android stereo (e.g., volume, track skip, mode).
- Vehicle Information Display: Depending on your vehicle and stereo model, the Canbus may allow the display of certain vehicle information (e.g., door status, air conditioning settings) on the stereo screen.
- Power Management: The harness ensures proper power supply and ignition sensing for the Android stereo, allowing it to turn on/off with the vehicle.
6. Maintenance
The Raise PSA-RZ-65 harness is designed for durability and requires minimal maintenance. To ensure optimal performance:
- Periodically check all connections to ensure they remain secure and free from corrosion.
- Keep the area around the harness and stereo free from excessive dust and moisture.
- Avoid pulling on the wires or connectors forcefully.
7. Troubleshooting
If you encounter issues with your Canbus car stereo harness, consider the following:
| Problem | Possible Cause | Solution |
|---|---|---|
| Android stereo not powering on. | Loose power connection, incorrect wiring. | Check all power connections. Ensure the 16-pin harness is fully seated. |
| Steering wheel controls not working. | Canbus not detected or incorrectly configured. | Verify Canbus connections. Re-enter factory settings, select correct car model, and perform 'Steering Wheel Learning'. Ensure Canbus version is updated. |
| No sound or intermittent audio. | Loose speaker connections, incorrect audio wiring. | Check all speaker wire connections on the harness and stereo. |
| Vehicle information (e.g., door status) not displayed. | Canbus configuration error, incompatible stereo feature. | Ensure the correct Canbus protocol and car model are selected in the stereo's factory settings. Not all stereos support all vehicle info displays. |
If you have any questions or persistent issues, please contact our technical support team for assistance.
8. Specifications
| Feature | Detail |
|---|---|
| Model | PSA-RZ-65 |
| Item Type | Cables, Adapters & Sockets |
| Voltage | 12 V |
| Origin | Mainland China |
| Canbus Decoder P/N | G-RZ-PSA65 |
| Canbus Decoder SW | V0129.212.06-HS |
| Canbus Decoder HW | BZ-GC3L-040D |
| Package Length | 16 cm |
| Package Width | 12 cm |
| Package Height | 12 cm |
| Package Weight | 0.3 kg |
9. User Tips
- Double-Check Compatibility: Always compare the back of your original car radio with the provided reference image to ensure the harness is suitable for your specific vehicle model and year.
- Consult Vendor for Password: If your Android stereo requires a password for factory settings or Canbus configuration and you don't have it, contact your stereo vendor for assistance.
- Update Canbus Firmware: Ensure your Canbus firmware is up-to-date for optimal performance and compatibility with your vehicle's systems. The video guide demonstrates how to check and update the Canbus version.
10. Warranty and Support
The Raise PSA-RZ-65 Canbus Car Stereo Harness comes with a 365-day warranty from the date of purchase, covering manufacturing defects and product malfunctions under normal use.
We are committed to providing excellent customer service. If you have any questions regarding the product, installation, or troubleshooting, our professional technical team is available to provide free technical services. Please do not hesitate to contact us for support.
