ipega PG-SW2186

Contents

ipega PG-SW2186 Charging Dock Instruction Manual

Model: PG-SW2186

1. Product Overview

The ipega PG-SW2186 Charging Dock is an 8-slot charging station specifically designed for use with the Nintendo Switch 2 Official Dock. It is fully compatible with original Joy-Con controllers for Nintendo Switch, Nintendo Switch OLED, and Nintendo Switch 2 consoles.

This charging station allows for simultaneous charging of 1 to 4 Joy-Con controllers. It features a built-in smart chip for protection against over-charge, over-voltage, over-current, and over-protection functions, ensuring safe and reliable operation. Equipped with LED charging indicators, it provides real-time status display for each charging slot.

Front view of the ipega PG-SW2186 charging dock with four Joy-Con controllers inserted, showing the individual charging slots A, B, C, D and the ipega logo.
Front view of the ipega PG-SW2186 charging dock with four Joy-Con controllers inserted.
Product packaging for the ipega 8-in-1 Charging Station, listing features like Fast Charge, Safe & Reliable, Magnetic Connection, and LED Indicators, compatible with NS/NS 2.
Product packaging highlighting key features and compatibility.

2. Setup Instructions

  1. Connect to Switch 2 Official Dock: Ensure your Nintendo Switch 2 Official Dock is powered on and connected to its official power adapter. The ipega PG-SW2186 charging dock is powered directly by the Switch 2 Dock.
    Side view of the ipega PG-SW2186 charging dock, highlighting the compact design and the USB connector for the Switch 2 Official Dock.
    Side view showing the USB connector for the Switch 2 Official Dock.
  2. Placement: Place the charging dock on a stable, flat surface, away from strong magnetic fields.

3. Operating Instructions

  1. Charging Joy-Cons: Gently slide your Joy-Con controllers into any of the 8 available charging slots (A, B, C, D). The design allows for easy plug-and-charge functionality.
    The ipega PG-SW2186 charging dock with Joy-Con controllers and a Nintendo Switch OLED console, showing compatibility.
    Joy-Cons inserted into the charging dock, compatible with Switch OLED.
  2. LED Indicators: Each charging slot is equipped with an LED indicator. These indicators will illuminate to show the charging status of the inserted Joy-Cons. Refer to the 'Specifications' section for indicator behavior.
    Angled view of the ipega PG-SW2186 charging dock with four Joy-Con controllers, emphasizing the individual charging indicators.
    Close-up view of the charging slots and LED indicators.
  3. USB 2.0 Expansion Port: The dock includes a USB 2.0 expansion port (5V DC output) for data transfer and charging of other compatible devices, such as the Nintendo Switch Pro Controller. This port is located at the rear of the unit.
    Rear view of the ipega PG-SW2186 charging dock, illustrating the USB 2.0 expansion port and the connection interface.
    Rear view showing the USB 2.0 expansion port.

4. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the charging dock. Do not use liquid cleaners or abrasive materials.
  • Environment: This device is intended for indoor use only. Avoid exposing the charging dock to extreme temperatures, humidity, or direct sunlight. Keep it away from strong magnetic fields.
  • Storage: When not in use for extended periods, disconnect the charging dock from the Switch 2 Official Dock and store it in a cool, dry place.

5. Troubleshooting

  • Joy-Cons not charging:
    • Ensure the charging dock is properly connected to the Switch 2 Official Dock.
    • Verify that the Switch 2 Official Dock is powered on and receiving power from its official adapter.
    • Check if the Joy-Cons are correctly seated in the charging slots.
    • Try charging a different Joy-Con to rule out an issue with the controller itself.
  • LED indicators not working:
    • Confirm the charging dock is receiving power.
    • Ensure a Joy-Con is properly inserted into the slot.
  • USB 2.0 port not functioning:
    • Ensure the charging dock is powered.
    • Verify the connected device is compatible and properly connected.

6. Specifications

Feature Description
Model Number PG-SW2186
Compatibility Nintendo Switch 2 Official Dock, Nintendo Switch Joy-Cons, Nintendo Switch OLED Joy-Cons, Nintendo Switch 2 Joy-Cons
Charging Slots 8 (supports 1-4 Joy-Cons simultaneously)
Power Source Powered by Switch 2 Official Dock (requires official power adapter)
USB Expansion Port 1 x USB 2.0 (5V DC output & data transfer for Switch Pro Controller only)
Charging Time Approximately 2.5 – 3.5 hours per cycle (for fully depleted Joy-Cons)
Protection Features Over-charge, over-voltage, over-current, over-protection
LED Indicators Equipped with charging indicators that easily identify the charging status.
Dimensions (approx.) Length: 22cm, Width: 11cm, Height: 4cm
Weight (approx.) 0.206 kg

7. Warranty and Support

For warranty information and technical support, please refer to the documentation provided with your purchase or contact the manufacturer directly. Keep your proof of purchase for any warranty claims.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.