EzoneTronics RM-BZBK03

Contents

EzoneTronics OEM Screen Upgrade Decoder Box

CarPlay Android Auto Retrofit Kit for Mercedes-Benz NTG4.5 System

Model: RM-BZBK03

1. Introduction

The EzoneTronics OEM Screen Upgrade Decoder Box is a retrofit kit designed to add CarPlay and Android Auto functionality to Mercedes-Benz vehicles equipped with the NTG 4.5 System. This kit provides an 'OEM' feel and appearance by utilizing your existing NTG system display, transforming your car radio from a single-function unit to a multi-functional infotainment system without replacing the original car radio.

It supports both wireless CarPlay and wireless Android Auto, allowing for automatic connection upon entering the vehicle. The kit also includes a Mirroring function and camera mode, enhancing driving safety and convenience.

Key Features:

  • Supports Mercedes-Benz A/B/C/E/CLA/GLK/ML/SLD models with NTG 4.5 System (requires Harman Becker port).
  • Provides wireless CarPlay and Android Auto for a smart and safe driving experience.
  • Plug and Play installation, designed for a perfect fit with the original car kit.
  • Built-in 2.4G and 5.8G Wi-Fi for stable connection and Bluetooth 5.0 technology.
  • Control via original steering wheel controls, touch control (vehicle-dependent), and Siri voice control.
  • Access GPS navigation apps like Google Maps, Waze, and Apple Maps with live traffic information.
  • Seamlessly switch between CarPlay display and factory controls at any time.

2. Safety Instructions

Please read the following instructions thoroughly before installation or connecting to avoid the risk of serious injury or potential violation of laws.

  • Always use specified accessory parts and install them securely.
  • Do not damage wiring. Failure to do so may result in electric shock or fire due to electrical shorts.
  • Do not install the unit in locations with high moisture or dust. Moisture or dust penetrating the unit may lead to product failure.

3. Product Contents

The package includes the following items:

  • EzoneTronics OEM Screen Upgrade Decoder Box (Main Unit)
  • Main Wiring Harness (with USB, AUX, CAN-L, CAN-H, CCD 12V, BACK connections)
  • USB Extension Cable
EzoneTronics Decoder Box and Wiring Harness
The main decoder box unit and the included wiring harness.
Side view of the decoder box showing USB/CAN port and Reset button
Side view of the decoder box, highlighting the USB/CAN port and Reset button.

4. Compatibility

This upgrade kit is compatible with Mercedes-Benz vehicles featuring the NTG 4.5 System with a BECKER NAVI-DOCK. Please verify your vehicle's compatibility before installation.

Compatible Models (NTG 4.5 System with Becker Navi-Dock):

  • 2012-2015 A-Class
  • 2011-2015 B-Class
  • 2011-2014 C-Class
  • 2012-2012 CLA
  • 2012-2015 GLA
  • 2012-2015 GLK
  • 2011-2016 ML/GL
  • 2011-2015 SLK

Notice: Even if your model is on the list, you must confirm the presence of a HARMAN BECKER slot in your vehicle when placing an order.

Compatible Mercedes-Benz models for NTG4.5 system
List of compatible Mercedes-Benz models for the NTG4.5 system.

How to Identify NTG4.5 vs NTG4.7:

The NTG4.5 system features a HARMAN BECKER slot in the glove box on the passenger side, which is absent in NTG4.7. Additionally, the NTG4.5 system uses an LVDS port.

Diagram showing Harman Becker slot and LVDS port for NTG4.5 identification
Visual guide to distinguish between NTG4.5 and NTG4.7 systems by checking for the HARMAN BECKER slot and LVDS port.

5. Installation

The EzoneTronics Decoder Box is designed for a 'Plug and Play' installation. Ensure your vehicle is turned off and the battery is disconnected before beginning installation.

Installation Steps:

  1. Align and Plug: Simply align the decoder box and plug it into the HARMAN-BECKER socket in your vehicle.
  2. Connect Wiring Harness: Connect the provided wiring harness to the decoder box and the corresponding ports in your car's audio system.
  3. USB Expansion: The USB port on the harness can be used to connect to a mobile phone or for software upgrades.
Installation steps for the EzoneTronics Decoder Box
Visual guide for the installation process: plugging into the HARMAN-BECKER socket, pairing Bluetooth, and connecting smartphones.

Connection Diagram:

Refer to the diagram below for detailed wiring connections.

Wiring connection diagram for the EzoneTronics Decoder Box
Detailed connection diagram for the decoder box, showing inputs for USB, AUX, Reversing Video, CAN-H, CCD 12V, CAN-L, and BACK.
  • USB: Connect to mobile phone and for software upgrades.
  • AUX: Connect to the original car AUX input.
  • Reversing video input: For aftermarket rear view camera.
  • CAN-H
  • CCD 12V
  • CAN-L
  • BACK

6. Operation

Steering Wheel Button Control:

The unit supports control via your original car's steering wheel buttons.

Steering wheel controls for CarPlay/Android Auto
Illustration of steering wheel controls: 1. Siri voice control, 2. Volume up/down, 3. Short press to answer, 4. Short press to hang up.
  • Siri Voice Control: Activate Siri.
  • Volume Up/Down: Adjust audio volume.
  • Short Press to Answer: Answer incoming calls.
  • Short Press to Hang Up: End calls.

CarPlay & Android Auto Requirements:

  • iPhone: iOS 10 or Newer
  • Android: Android 11 or Newer

Initial Bluetooth Connection (Mandatory for Wired/Wireless):

Before using any wired or wireless connection, you must first connect the 'MB Bluetooth'.

  1. Turn on Bluetooth Audio: On your car's stereo, turn on Bluetooth audio and select "Connect via BT audio device".
  2. Pair with MB Bluetooth: Pair your phone's Bluetooth with the 'MB Bluetooth' device.
Bluetooth pairing steps for wireless CarPlay/Android Auto
Step-by-step guide for connecting your phone's Bluetooth to the car's audio system and then pairing with the 'MB Bluetooth' device.

Accessing the Becker Interface:

  1. Press the "NAVI" button on your car's console to enter the Becker interface.
  2. In the Becker interface, click the "Bluetooth" icon and select "Auto Connect".

Wireless CarPlay Connection:

  1. Ensure your iPhone's Wi-Fi and Bluetooth are turned on.
  2. On your phone, click the CarPlay icon, then pair with the Bluetooth device named "BK-xxxx".
  3. Allow all requested permissions and click "Use CarPlay". Your iPhone will connect to wireless CarPlay within a few seconds.

Wireless Android Auto Connection:

  1. Ensure your Android phone's Wi-Fi and Bluetooth are turned on.
  2. Pair your phone with the Bluetooth device named "BK-xxxx".
  3. Tap "Pair-Allow" on any pop-up notifications on your Android smartphone. Your phone will connect to wireless Android Auto within a few seconds.

Wired CarPlay & Android Auto Connection:

After ensuring the factory 'MB Bluetooth' is paired, simply plug your phone's data cable into the USB port on the Becker box. The system will automatically enter the corresponding mobile phone system's interconnection method.

Wired CarPlay connection diagram
Diagram showing wired CarPlay connection via USB.
Wired Android Auto connection diagram
Diagram showing wired Android Auto connection via USB.

7. Rear View Camera Connection

The Becker box supports the installation of a CVBS format aftermarket rear view camera. If your car already has a factory rear view camera, this feature cannot be added or used.

Rear view camera wiring diagram
Wiring diagram for connecting an aftermarket CVBS rear view camera, showing connections for trigger wire, GND 12V-, BACK, and video input.

8. Specifications

FeatureSpecification
Operating Voltage5V
Operating Temperature-30°C to +75°C
Power Consumption1A (rated), 3A (Max)
Stored Temperature-30°C to +85°C
Environment Humidity≤98% (at 45°C), 65±5% (rated)
Shutdown Current300mA (Clock is on)
Quiescent CurrentLess than 3mA
Charging Current≤2A (If USB charging current >1A, unit activates circuit protection to control current below 1.5A to prevent product damage.)

9. Troubleshooting (FAQ)

Q1: CarPlay works but there is no sound after connecting 'MB Bluetooth'.

A1: Please check if the Bluetooth connection has been lost. Also, verify the Audio Source setting on your phone. If necessary, switch the audio source to 'MB Bluetooth' and disconnect any other connections that might be interfering.

Q2: I paired Bluetooth and allowed all permissions, but I cannot enter the CarPlay interface.

A2: First, in the Becker box interface, navigate to "Settings > System > Factory reset" to reset the box. Simultaneously, reset your mobile phone's network settings. If the issue persists, please contact our aftersales service for further assistance.

10. User Tips

  • Verify Compatibility: Double-check your Mercedes-Benz model and confirm it has the NTG 4.5 system with the HARMAN BECKER slot before installation to ensure proper functionality.
  • Firm Connections: Ensure all wiring harness connections are secure and fully seated to prevent intermittent issues.
  • Software Updates: Keep your smartphone's operating system (iOS or Android) updated to the latest version for optimal CarPlay/Android Auto performance and compatibility.
  • Initial Bluetooth Setup: Always perform the initial 'MB Bluetooth' pairing as instructed, as this is crucial for both wired and wireless connections.

11. Warranty and Support

Our products undergo strict functional and performance tests before leaving the factory to ensure they are delivered in good condition. All products are covered by the three guarantees policy for vehicle electronics.

If you encounter any problems while using the product, please contact your dealer for support.

For additional information, you may refer to the official user manual PDF: User Manual (PDF)

© 2024 EzoneTronics. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.