TUOSEN 21-in-1 Multi-Tool Wire Stripper Pliers

Contents

TUOSEN 21-in-1 Multi-Tool Wire Stripper Pliers User Manual

Professional Crimper, Cable Stripper & Coil Winder for Electricians

Introduction

Thank you for choosing the TUOSEN 21-in-1 Multi-Tool Wire Stripper Pliers. This versatile tool is designed for electricians and DIY enthusiasts, offering a wide range of functions including wire stripping, cutting, crimping, and winding, all in a compact, foldable design. Made from durable carbon steel, it ensures precision and longevity for various electrical tasks.

Please read this manual carefully before using the tool to ensure safe and efficient operation.

Safety Information

  • Always wear appropriate personal protective equipment, such as safety glasses, when using this tool.
  • Ensure the tool is clean and free from debris before and after use.
  • Do not use the tool for purposes other than its intended design.
  • Keep out of reach of children.
  • Exercise caution when handling sharp edges and moving parts.
  • Always ensure the safety lock is engaged when the tool is folded for storage or transport.

Setup

The TUOSEN 21-in-1 Multi-Tool is designed for portability and ease of use. It comes in a folded configuration.

  1. To unfold the tool, locate the safety lock mechanism.
  2. Disengage the safety lock.
  3. Carefully unfold the handles until the tool is fully extended and ready for use.
  4. To fold for storage, reverse the process, ensuring the safety lock is engaged to prevent accidental opening.
Folded and unfolded views of the 21-in-1 multi-tool wire stripper
Figure 1: Folded and Unfolded Tool Views
Demonstration of the collapsible feature of the wire stripper
Figure 2: Collapsible Feature Demonstration

Operating Instructions

The TUOSEN 21-in-1 Multi-Tool offers a variety of functions. Refer to the diagram below for the location of each feature.

Detailed diagram labeling all 21 functions of the multi-tool wire stripper
Figure 3: Multi-Tool Function Diagram

Key Functions:

  • Clamping (Luya open ring eagle beak): Use the pliers' jaws for gripping and holding objects.
  • Pipe Wrench: Integrated into the jaw design for gripping pipes or rounded fasteners.
  • Hex Wrench: Specific cutouts for hexagonal nuts and bolts.
  • Wire Stripping: Use the designated stripping holes (marked with AWG/mm sizes) to remove insulation from wires. Insert the wire, squeeze the handles, and pull.
  • Wire Cutting: The sharp cutting edges are suitable for cleanly cutting various types of wires.
  • Thread Trimming: For precise cutting of small threads or thin materials.
  • Nail Broken Winding Hole: A specialized hole for winding or straightening small nails or wires.
  • Branch Hole Crimping: For crimping terminals or connectors onto wires.
  • Screw: Integrated screwdriver bit or function.
  • Winding: For bending or shaping wires.
  • Crimp Terminal: Dedicated sections for crimping various terminal types.
  • Tighten: General tightening function for small fasteners.
  • Hook Cable: Feature for hooking or pulling cables.
Close-up of wire stripping action using the multi-tool
Figure 4: Wire Stripping in Action

For a visual guide on how to use the various functions of the tool, please watch the demonstration video below:

Video 1: Product Demonstration - Shows various functions including stripping, cutting, and crimping.

Maintenance

  • After each use, clean the tool to remove any wire fragments, dust, or debris. A dry cloth is usually sufficient.
  • For stubborn grime, use a mild cleaner and ensure the tool is thoroughly dried afterwards to prevent rust.
  • Periodically apply a light oil to the pivot points and moving parts to ensure smooth operation and prevent corrosion.
  • Store the tool in a dry environment, preferably in its folded and locked position, to protect the blades and mechanisms.
  • Inspect the cutting edges and stripping holes regularly for wear or damage. Replace the tool if significant damage is observed to ensure safety and performance.

Troubleshooting

Most issues can be resolved with proper maintenance and usage. Here are some common scenarios:

  • Difficulty Stripping Wire: Ensure you are using the correct stripping hole size for the wire gauge. If the wire is too small, it may not strip cleanly; if too large, it may damage the wire. Check for dull blades and clean any debris from the stripping holes.
  • Tool Feels Stiff: Apply a small amount of lubricating oil to the pivot points and work the handles to distribute the oil.
  • Inaccurate Cuts: Inspect the cutting blades for damage or dullness. Sharp blades are essential for clean cuts.
  • Safety Lock Malfunction: Ensure no debris is obstructing the locking mechanism. If it remains faulty, discontinue use.

Specifications

Diagram showing dimensions and stripping specifications of the multi-tool
Figure 5: Dimensions and Stripping Specifications
Product Specifications
Attribute Value
Brand TUOSEN
Material Carbon Steel
Handle Style Straight
Features Multifunctional
Application Cutting, Stripping, Crimping, Winding
Plier Style Chinese
Origin Mainland China
Total Length 205mm
Handle Length 95mm
Foldable Size 115mm x 84mm
Opening Range 40mm
Weight 183g

Stripping Specifications

US Wire Number (AWG) Metric Wire Diameter (mm)
8 3.2mm
10 2.6mm
12 2.0mm
14 1.6mm
16 1.3mm

User Tips

  • For optimal wire stripping, ensure the wire is inserted straight into the correct gauge hole and apply steady pressure.
  • When cutting, position the wire deep into the cutting jaws for maximum leverage and a clean cut.
  • Utilize the folding feature for safe and compact storage in your toolbox or pocket.
  • Regularly check the tool's moving parts for any signs of wear or looseness to maintain precision.

Warranty and Support

Your TUOSEN 21-in-1 Multi-Tool is built for durability and performance. We stand by the quality of our products.

Returns

This product is eligible for free returns within 90 days of purchase. Please ensure the product is in its original condition for a successful return.

Delivery Guarantees

We offer fast delivery services. In the event of delivery delays, lost packages, or damaged items, specific compensation and refund options may be available. For detailed information, please refer to the seller's official policies or contact customer support.

Customer Support

For any questions, concerns, or assistance with your TUOSEN Multi-Tool, please contact the seller directly through the platform where you made your purchase. They will be able to provide the most accurate and timely support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.