Introduction
This manual provides detailed instructions for the installation and configuration of the RZ-DF02 16 Pin Plug Canbus Box and its associated wiring harness. This product is designed to integrate an Android car radio with various Nissan models, including Versa, X-Trail, Qashqai, Sylphy, Teana, and Kicks. It covers the setup of the vehicle frame, radio cable, CANBUS system, and includes general guidance for related components like window control modules and oil filters.
Important Safety Notice:
The contents of this manual are for reference only. Always follow the specific requirements of your vehicle when performing any installation or maintenance. If you are not experienced with vehicle modifications, it is strongly advised to consult a professional local installer.
Safety Precautions
- Always disconnect the negative terminal of the vehicle's battery before starting any electrical work to prevent short circuits and ensure safety.
- Ensure all connections are secure and free from looseness to prevent malfunctions or damage.
- Handle tools and components with care to avoid damage to the vehicle or the product.
- Refer to your vehicle's owner's manual for specific details regarding component locations and capacities (e.g., oil type and volume).
Package Contents
The package typically includes the following components:
- RZ-DF02 CANBUS Decoder Box
- 16 Pin Wiring Harness
- Various connectors and adapters (e.g., RCA, antenna adapter)
Setup: Android Car Radio Installation
1. Pre-Installation Preparation
Before starting, disconnect the negative pole of the vehicle's battery to prevent short circuits and ensure safety.
Ensure you have the following essential accessories:
- Android host unit
- Installation fascia frame (if applicable, see video for examples)
- Power cable and CANBUS adapter (included)
- GPS antenna
- USB extension cable
- Rearview camera cable (if required)
- Screwdriver
- Plastic prying tools
- Electrical tape
- Insulation sleeves
2. Removing the Original Center Console
- Using a plastic prying tool, carefully pry off the decorative panel around the edges of the center console. Be gentle to avoid damaging mounting clips.
- Unscrew any fasteners securing the original head unit.
- Disconnect the factory wiring harness and antenna connector. Keep them organized for later use.
3. Installing the Android Host and Conducting Functional Tests
Wiring Harness Connection:
Connect the power cable of the Android host to the vehicle's original wiring harness. If a CANBUS module is provided (like the RZ-DF02), first confirm its compatibility with your vehicle model before making connections. Ensure the ACC wire, power supply wire, and speaker wires are securely connected.
Wiring Diagram Details:
| Wire Color | Function | Pin Number |
|---|---|---|
| White | Front speaker L+ | - |
| White/black striped | Front speaker L- | - |
| Gray | Front speaker R+ | - |
| Gray/black striped | Front speaker R- | - |
| Purple | Rear speaker L+ | - |
| Purple/black striped | Rear speaker L- | - |
| Green | Rear speaker R+ | - |
| Green/black striped | Rear speaker R- | - |
| Black | Ground Wire / B- | 1 |
| Yellow | Constant Power Supply +12V (BATTERY) | 2 |
| Red | Ignition Switch (ACC) | 3 |
| Orange | Illuminate Backlight (ILLUMINATION) | 4 |
| Pink | Reversing camera control line (REVERSE) | 5 |
| Brown | Steering Wheel Control 1 (KEY1) | 6 |
| Blue | Auto Antenna Power (ANT) | 7 |
Peripheral Device Connection:
- Attach the GPS antenna and position it above the center console or near the A-pillar.
- Route the USB extension cable to a convenient location.
- If using a backup camera, connect the video cable and trigger wire as instructed.
Functional Testing:
Temporarily reconnect the vehicle battery and turn on the system to perform the following tests:
- The Android host starts up smoothly and normally.
- Speakers deliver audio output correctly.
- Steering wheel control buttons function as intended.
- Backup camera, radio, and Bluetooth features work properly.
4. Securing the Installation and Finalizing
- Install the Android host into the fascia frame and fix it in place using the provided screws.
- Align the mounting clips of the decorative panel with the corresponding slots on the center console, then gently press until it snaps into position.
- Use cable ties to organize any redundant wiring, ensuring it is firmly secured and free from unnecessary movement, vibration, or potential damage during vehicle operation.
5. CANBUS Protocol Configuration
Access the settings menu on your Android host unit:
- Navigate to "Factory Settings" or "Protocol Settings" (for some models, go to "Car Settings → Protocol Settings").
- Enter the password (refer to your product manual for specific details).
- Select the appropriate CANBUS protocol brand (common options include Hiworld (WC), Raise (RZC), Simple Soft (XP), OuDi (OD)).
- From the protocol list, choose your vehicle's brand, model, and year of production.
- Verify that the steering wheel control buttons are correctly recognized by the system.
Operating Instructions
Once the Android car radio and CANBUS system are installed and configured, operate your new system as per the Android head unit's specific user manual. The CANBUS decoder ensures seamless integration with your vehicle's existing systems.
- Steering Wheel Controls: Use the original steering wheel buttons to control audio volume, track changes, and answer/end calls.
- Vehicle Information Display: Air conditioning information and parking radar data should now be displayed on the Android head unit screen.
- Rearview Camera: The rearview camera should automatically activate when the vehicle is put into reverse gear.
Maintenance
General Maintenance for Wiring and CANBUS
- Periodically check all wiring connections for tightness and signs of wear or corrosion.
- Ensure the CANBUS module is securely mounted and free from moisture or excessive heat.
- Keep the Android head unit's software updated to ensure optimal performance and compatibility with the CANBUS system.
Car Window Regulator Switch Replacement
- Power Cutoff Preparation: Switch off vehicle power. Disconnect the negative terminal of the vehicle battery or follow manufacturer guidelines to shut off power.
- Locate the Switch: Find the window regulator switch on the interior side of the door panel, usually near the door handle or on the integrated door control panel.
- Remove Old Switch Panel: Use a screwdriver or suitable tool to carefully detach the old switch panel. It's typically held by screws or mounting clips. Handle gently to prevent damage.
- Install New Switch: Fit the new window regulator switch into position, ensuring a secure connection with the door's wiring harness. Connect the wiring plug to the new switch and fasten with screws if needed.
- Reinstall Switch Panel: Place the switch panel back onto the door, aligning it with mounting points. Ensure it's firmly fixed and operates smoothly.
- Restore Vehicle Power: Reattach the negative cable to the battery terminal.
- Test New Switch: Turn on vehicle power and test the new switch. Verify windows move smoothly and respond correctly.
Car Oil Filter Replacement Steps
- Prepare for Replacement: Park the vehicle on a flat, level surface and engage the parking brake. Turn off the engine and allow oil to cool for 10-15 minutes. Gather a new oil filter (matched to your vehicle model), an oil filter wrench, a drain pan, a funnel, and fresh engine oil.
- Drain Old Engine Oil: Locate the oil drain plug (refer to owner's manual). Place the drain pan beneath it, loosen and remove the plug. Allow all old oil to drain completely. Clean the plug and reinstall, tightening securely but not over-tightening.
- Remove Old Oil Filter: Find the oil filter (typically on the side or bottom of the engine). Position the drain pan beneath it. Use an oil filter wrench to loosen it counterclockwise. Unscrew by hand and carefully remove, tilting to prevent spills.
- Prepare New Oil Filter: Check the new oil filter's rubber gasket for intactness. Apply a thin layer of fresh engine oil to the gasket. Do not pre-fill the filter with oil.
- Install New Oil Filter: Screw the new oil filter onto the engine clockwise until the gasket contacts the mounting surface. Use the oil filter wrench to tighten an additional 3/4 of a turn (do not over-tighten).
- Refill with Fresh Engine Oil: Locate the oil fill cap, remove it, and insert a funnel. Pour the recommended amount of fresh engine oil (check vehicle's manual). Replace the oil fill cap securely.
- Verify and Test: Start the engine and let it run for 1-2 minutes at idle. Turn off the engine and wait a few minutes for oil to settle. Check the oil level with the dipstick, adding more if needed. Inspect for leaks around the drain plug and new oil filter. Dispose of old oil and filter properly.
Troubleshooting
Abnormal Display of Air Conditioning or Parking Radar
- Confirm that the correct vehicle protocol is selected in the CANBUS configuration.
- Check if the CANBUS module connector is loose.
No Sound or Abnormal Audio Output
- Ensure that the correct protocol is selected for the factory amplifier (if applicable).
- Verify that the speaker wiring or optical decoder module is properly connected and supported by the system.
Specifications
| Feature | Detail |
|---|---|
| Model | RZ-DF02 |
| Item Type | Cables, Adapters & Sockets |
| Voltage | 12 V |
| Origin | Mainland China |
| Compatibility | Nissan Versa, X-Trail, Qashqai, Sylphy, Teana, Kicks (Specific years/models as per CANBUS module label) |
| Package Weight | 0.15 kg |
| Package Dimensions | 10cm x 10cm x 10cm |
User Tips
- Always double-check the CANBUS protocol settings after installation, especially if steering wheel controls or climate display are not working correctly.
- When connecting the wiring harness, ensure all pins are fully seated to avoid intermittent connectivity issues.
- For optimal GPS performance, place the GPS antenna in a clear, unobstructed location, typically on the dashboard or near the A-pillar.
Warranty and Support
For warranty information, technical support, or further assistance, please contact the seller or manufacturer directly. Keep your purchase records handy when seeking support.
A user manual in PDF format is available for download: User Manual (PDF)
