Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your ANYFAR Wireless Carplay Android Auto Interface Retrofit Kit. This kit is designed to integrate Apple CarPlay and Android Auto functionalities into your Audi A6 (C7) or A7 vehicle equipped with the RMC system, model years 2012-2016, utilizing the original 6.5-inch screen.
The system maintains the original vehicle's aesthetics and control methods, including the MMI rotary controller and steering wheel controls, providing a seamless "OEM" feel.

Compatibility
This interface is specifically designed for Audi vehicles with the RMC platform and a 6.5-inch screen. Please verify your car's system before installation.
| Car Model | Years | Screen Size |
|---|---|---|
| Audi A6 | 2012-2016 | 6.5" |
| Audi A7 | 2012-2016 | 6.5" |
To confirm your car's system, navigate to the "Version information" menu in your MMI system and look for "RMC" in the software version. If you are unsure, please contact customer support with photos of your car's center console and the software version screen.

Setup and Installation
The ANYFAR interface is designed for a plug-and-play, non-destructive installation, meaning no wire cutting is required. However, professional installation is recommended due to the complexity of automotive electronics.
Package Contents:
The product package includes the main decoder box and all necessary wiring harnesses.
Wiring Diagram:
Follow the detailed wiring diagram below for proper connection. Ensure all connections are secure before powering on the system.

- LVDS Cable: Connect the provided LVDS cable to the original display cable and the decoder box.
- Power Connections: Connect the CAN POWER and other power cables to the original power cable and air conditioning panel as indicated.
- USB: Connect your USB flash drive or smartphone via the USB port.
- MIC IN: Connect the external microphone for voice control.
- RCA Inputs: Utilize the 2 RCA inputs for rear and front cameras (PAL, NTSC, CVBS AHD compatible).
- AUX: Connect the AUX cable if needed for audio output.
- Noise Reduction: If you experience noise, try unplugging the indicated cable (refer to diagram).
Operating Instructions
The ANYFAR interface allows you to seamlessly switch between your car's original MMI system and the CarPlay/Android Auto interface.
Switching Systems:
You can switch between the original car system and the CarPlay/Android Auto system at any time using the factory controls. The system is designed for a dual-system switch, allowing free and seamless transitions.

Wireless Connectivity:
The unit features built-in 2.4G and 5.8G Wi-Fi for stable connections and Bluetooth 5.0 technology for audio and calls.
Key Features:
- Wireless CarPlay: Connect your iPhone wirelessly to access navigation, music, calls, and messages directly on your car's display.
- Wireless Android Auto: Connect your Android phone wirelessly to enjoy Android Auto services, including navigation, music, and voice commands, for a safer driving experience.
- Mirror Link: Mirror your smartphone screen to the car's display for visual effects.
- Voice Control: Use voice commands like "Hey Siri..." for hands-free operation. The system supports both Siri and Google Voice assistants.
- Navigation: Access GPS navigation apps such as Google Maps, Waze, Apple Maps, NAVER Maps, and T Maps with live traffic information.
- Music Playback: Play mobile music and USB music synchronously with high-fidelity sound quality, enhanced by a built-in DSP with fully adjustable Audio EQ.
- Camera Support: Supports factory original reverse cameras, parking radar, and aftermarket reverse cameras, including 360-degree cameras. Features dynamic guidance lines and parking distance control in OEM parking style.







Control Methods:
The system can be controlled using:
- Steering wheel controls
- Touch control (if your vehicle's screen supports it)
- MMI rotary controller
- Voice commands
Maintenance
The ANYFAR Wireless Carplay Android Auto Interface Retrofit Kit requires minimal maintenance. Keep the unit and connections clean and dry. Avoid exposing the unit to extreme temperatures or moisture. Periodically check all cable connections to ensure they are secure.
No user-serviceable parts are inside the decoder box. Do not attempt to open or repair the unit yourself, as this may void the warranty.
Troubleshooting
If you encounter issues with your ANYFAR interface, please refer to the following common solutions:
- No Power/No Display:
- Check all power connections as per the wiring diagram.
- Ensure the vehicle's ignition is on.
- No Audio:
- Verify the AUX connection is properly made and selected as the audio source in your car's MMI system.
- Check volume levels on both your phone and the car's audio system.
- If experiencing noise, refer to the wiring diagram for the specific cable to unplug.
- CarPlay/Android Auto Not Connecting:
- Ensure Wi-Fi and Bluetooth are enabled on your smartphone.
- Forget and re-pair the Bluetooth connection between your phone and the interface.
- Restart your smartphone and the car's infotainment system.
- Confirm your phone's operating system is up to date.
- Intermittent Connection:
- Check for any interference from other wireless devices.
- Ensure your phone is within close proximity to the interface.
- Display Issues (e.g., distorted image):
- Check the LVDS cable connections for looseness or damage.
If the problem persists, please contact customer support for further assistance.
Specifications
| Feature | Detail |
|---|---|
| Brand Name | ANYFAR |
| Compatible Car Models | Audi A6, A7 (2012-2016) with RMC system |
| Display Size | Supports original 6.5" screen |
| Din Size | Double Din |
| Touch Screen | Yes (if original screen is touch-enabled) |
| Digital Media Format | MP3, MP4 |
| Connectivity | Wireless CarPlay, Wireless Android Auto, Mirror Link, Bluetooth 5.0, 2.4G/5.8G Wi-Fi, USB |
| Audio Processing | Built-in DSP, fully adjustable Audio EQ |
| Camera Inputs | 2 RCA inputs (Rear/Front PAL, NTSC, CVBS AHD camera support), HD 360 panoramic camera support |
| Control Methods | Steering wheel controls, touch control, MMI rotary controller, voice control (Siri, Google Voice) |
| Installation | Plug and play, non-destructive |
| Item Weight | 0.9 kg |
| Package Dimensions (approx) | Length: 26 cm, Width: 20 cm, Height: 12 cm |
Warranty and Support
The ANYFAR Wireless Carplay Android Auto Interface Retrofit Kit comes with a 365-day warranty, ensuring quality assurance and support.

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact the seller's customer support. They offer 1-on-1 engineer services and a professional support team.
User Tips
- Cables Included: The product package includes all necessary cables for installation.
- System Verification: Always double-check your car's MMI software version (looking for "RMC") and screen size (6.5 inches) to ensure full compatibility before attempting installation.
- Professional Installation: While designed for plug-and-play, professional installation is highly recommended to avoid potential damage to your vehicle's electrical system or the unit itself.