1. Introduction
Welcome to the OOTD T10 Electric Scooter user manual. This document provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your new electric scooter. The OOTD T10 is designed for urban and outdoor riding, featuring a powerful 48V brushless motor, 11-inch tubeless off-road tires, and a robust braking system for a reliable and enjoyable riding experience across various terrains.
Please read this manual thoroughly before using the scooter to ensure proper handling and to maximize its lifespan.
2. Safety Information
⚠ WARNING: Potential Fire Risk
Please strictly follow the instruction manual for charging and storage to mitigate potential fire risks. Always wear appropriate protective equipment, including a helmet, knee pads, and elbow pads, while operating the scooter. Fully comply with all applicable local laws and regulations regarding electric scooter use.
- Always wear a helmet and other protective gear.
- Do not ride in heavy rain or through standing water.
- Avoid riding on slippery surfaces.
- Ensure all bolts and quick releases are securely fastened before each ride.
- Do not perform stunts or ride recklessly.
- Keep hands and feet away from moving parts.
- Do not exceed the maximum load capacity of 150kg.
- Children should only operate the scooter under adult supervision.
3. Product Overview
The OOTD T10 Electric Scooter is engineered for performance and durability. Below are key components and features:
Figure 3.1: OOTD T10 Electric Scooter, front-side view.
Figure 3.2: OOTD T10 Electric Scooter, side view.
Figure 3.3: OOTD T10 Electric Scooter, front view.
Figure 3.4: OOTD T10 Electric Scooter, rear view.
Figure 3.5: OOTD T10 Electric Scooter, folded view.
3.1. Key Features
- Motor: 48V Brushless Motor, Rated Power 500W, Peak Power 900W
- Tires: 11-inch Tubeless Off-Road Pneumatic Tires
- Brakes: Front and Rear Disc Brakes (140mm brake disc)
- Suspension: Front-Arm Shock Absorber
- Battery: 48V 13.5Ah High-Density Lithium
- Max Speed: 50 km/h
- Range: 35-45 km (at medium speed)
- Charging Time: 4-5 hours
- Max Load: 150 kg
- Climb Angle: 25-35°
- Display: New Large-Screen LED Instrument
- Portability: One-Click Folding Mechanism
- Waterproof Grade: IP54
Figure 3.6: Product Highlights of the OOTD T10 Electric Scooter.
3.2. Handlebar Controls and Display
The handlebar features an intuitive layout for easy control and real-time data viewing.
Figure 3.7: Handlebar Controls and Display Layout.
- Speed: Current riding speed.
- Gear: Current speed mode (Eco, Low Speed, High Speed).
- Power: Battery level indicator.
- Total Mileage: Accumulated distance traveled.
- Light Button: Activates headlights and taillights.
- Gear Switch: Toggles between speed modes.
- Accelerator: Controls acceleration.
- On/Off Voltage Lock: Main power switch for the scooter.
4. Setup
4.1. Unfolding the Scooter
- Place the scooter on a flat surface.
- Locate the quick folding buckle mechanism near the base of the handlebar stem.
- Release the buckle and carefully lift the handlebar stem until it locks into an upright position. Ensure the locking mechanism is fully engaged and secure.
- Adjust the handlebar height if necessary and secure it.
Figure 4.1: Scooter dimensions and quick folding buckle.
4.2. Initial Charge
Before your first ride, fully charge the scooter's battery. Connect the charger to the charging port on the scooter and then to a power outlet. The charging indicator on the charger will typically change color (e.g., red to green) when charging is complete. Charging time is approximately 4-5 hours.
Figure 4.2: Battery specifications and charging details.
4.3. Pre-Ride Check
Always perform the following checks before each ride:
- Ensure tires are properly inflated and free from damage.
- Verify that the brakes are functioning correctly.
- Check that the handlebar stem is securely locked.
- Confirm that all lights (headlight, taillight, turn signals) are working.
- Ensure the battery is sufficiently charged.
5. Operating Instructions
5.1. Powering On/Off
To power on the scooter, use the On/Off Voltage Lock on the handlebar. To power off, turn the key to the off position.
5.2. Riding the Scooter
- Starting: Place one foot on the deck and push off with the other foot to gain some initial momentum.
- Acceleration: Once moving, gently press the Accelerator lever with your thumb to engage the motor and accelerate.
- Speed Modes: Use the Gear Switch button to cycle through the three available speed modes: Eco Gear, Low Speed Gear, and High Speed Gear.
- Braking: To slow down or stop, gently squeeze the brake levers on the handlebars. The scooter is equipped with front and rear disc brakes for effective stopping power. The brake light will flash when braking.
- Turning: Lean slightly in the direction you wish to turn and gently steer the handlebars. Use the turn signals for visibility.
Figure 5.1: Headlight and Taillight operation.
5.3. Folding for Transport/Storage
To fold the scooter, ensure it is powered off. Release the quick folding buckle and carefully fold the handlebar stem downwards until it clicks into its folded position. This compact design allows for easy storage and transport in a car trunk, on public transport, or in small spaces.
Figure 5.2: Compact portability of the OOTD T10 when folded.
6. Maintenance
6.1. General Cleaning
Clean the scooter regularly with a damp cloth. Do not use high-pressure water jets or corrosive cleaning agents, as this can damage electrical components and bearings. Ensure the charging port cover is securely closed when not charging.
6.2. Tire Care
Regularly check the tire pressure of the 11-inch tubeless pneumatic tires. Maintain the recommended pressure (refer to the tire sidewall for details) to ensure optimal performance, range, and safety. Inspect tires for any signs of wear, punctures, or damage.
Figure 6.1: 11-inch off-road pneumatic tire and disc brake.
6.3. Brake System
Periodically inspect the front and rear disc brakes for wear on the brake pads and discs. Ensure the brake levers operate smoothly and provide adequate stopping power. Adjust or replace components as needed by a qualified technician.
6.4. Battery Care and Storage
- Always use the original charger provided with the scooter.
- Do not overcharge or completely drain the battery.
- For long-term storage, charge the battery to approximately 50-70% and store the scooter in a cool, dry place away from direct sunlight and extreme temperatures. Recharge every 1-2 months to prevent deep discharge.
- Avoid exposing the battery to temperatures below -10°C (14°F) or above 40°C (104°F).
7. Troubleshooting
If you encounter issues with your OOTD T10 Electric Scooter, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Scooter does not power on | Battery is low or dead; On/Off Voltage Lock is off; Loose connection | Charge the battery; Turn the On/Off Voltage Lock to 'on'; Check all visible connections. |
| Motor not engaging/weak power | Low battery; Incorrect speed mode; Faulty accelerator | Charge the battery; Switch to a higher speed mode; Contact support if accelerator is unresponsive. |
| Brakes are not effective | Worn brake pads; Loose brake cable; Disc damage | Inspect and replace brake pads; Adjust brake cable tension; Have brakes inspected by a professional. |
| Unusual noises during operation | Loose components; Debris in wheels/motor; Worn bearings | Check for loose bolts; Inspect wheels for obstructions; Contact support for internal issues. |
| Lights not working | Light button off; Loose wiring; Faulty LED | Press the Light Button; Check visible wiring; Contact support for replacement. |
If the problem persists after attempting these solutions, please contact customer support for further assistance.
8. Specifications
Detailed technical specifications for the OOTD T10 Electric Scooter:
Figure 8.1: Product Parameter Table.
| Parameter | Value |
|---|---|
| Product Model | OOTD T10 |
| Dimensions (Folded) | 126 × 66.5 × 58 cm |
| Maximum Speed | 50 km/h |
| Motor | Rated Power 500W, Peak Power 900W |
| Battery | 48V 13.5Ah High-Density Lithium |
| Wheel Size | 11-Inch Tubeless Tires |
| Maximum Range | 45 km (at medium speed) |
| Climb Angle | 25-35° |
| Motor Rated Voltage | 48V |
| Max Load | 150 kg |
| Charger Output Voltage | 54.6V |
| Charger Output Current | 3A |
| Charging Time | 4-5 hours |
| Product Weight | 29.5 (±3-5%) kg |
| Brakes | Front and Rear Disc Brakes |
| Waterproof Grade | IP54 |
| Foldable Body | Yes |
| Certification | CE |
| Applicable People | Unisex |
| Origin | Mainland China |
9. User Tips
- Familiarize Yourself: Before your first ride, spend some time in a safe, open area to get accustomed to the scooter's controls, acceleration, and braking.
- Local Regulations: Always check and adhere to local laws and regulations regarding electric scooter usage, including speed limits, helmet requirements, and where you can ride.
- Regular Checks: Make it a habit to perform a quick safety check before every ride, focusing on brakes, tires, and handlebar stability.
- Battery Management: For optimal battery life, avoid completely draining the battery and try to keep it charged between 20% and 80% during regular use.
- Visibility: Always use the scooter's lights when riding in low-light conditions or at night. Consider wearing reflective clothing to enhance your visibility to others.
- Terrain Awareness: While the T10 is equipped with off-road tires, always be mindful of the terrain. Avoid excessively rough or hazardous surfaces that could damage the scooter or cause a fall.
10. Warranty and Support
For any warranty claims, returns, or technical support, please contact the seller or retailer from whom you purchased the OOTD T10 Electric Scooter. Keep your proof of purchase for warranty validation.
The seller offers a 'Return & Refund Policy' for eligible items. Please refer to the specific terms and conditions provided at the time of purchase or on the seller's platform.
For information regarding data privacy and security, please refer to the 'Security & Privacy' policy provided by the seller or platform.
