Introduction
Welcome to the IMIKI SP1 Wireless Earbuds user manual. This guide provides detailed instructions on how to set up, operate, and maintain your new earbuds. Please read this manual carefully before using the product to ensure optimal performance and longevity.
Product Overview
The IMIKI SP1 Wireless Earbuds are designed for comfort and high-quality audio. Familiarize yourself with the components and key features:
Key Features:
- Ergonomic Design: Weighing just 5g per earbud for all-day comfort and a secure fit.
- 10mm Dynamic Drivers: For rich bass and crystal-clear highs.
- Bluetooth 5.4: Ensures fast and stable wireless connections.
- IPX4 Water Resistance: Protects against sweat and splashes.
- Long Battery Life: Up to 5 hours on a single charge, and up to 24 hours of extended battery life with the charging case.
Package Contents
Ensure all items listed below are present in your package:
- 1 x Pair of IMIKI SP1 Earbuds
- 1 x Charging Case (USB-C)
- 1 x USB-B to USB-C Charge Cable
- 1 x User Manual
Setup Guide
1. Charging the Earbuds and Charging Case
Before first use, fully charge your IMIKI SP1 earbuds and charging case.
- Place the earbuds into the charging case. Ensure they are correctly seated.
- Connect the USB-B end of the provided charging cable to the charging case and the USB-C end to a compatible USB power adapter (not included).
- The indicator lights on the charging case will show the charging status. A full charge typically takes about 2 hours.
2. Bluetooth Pairing
To connect your IMIKI SP1 earbuds to your device:
- Open the charging case. The earbuds will automatically power on and enter pairing mode (indicator light will flash).
- On your smartphone or Bluetooth-enabled device, go to the Bluetooth settings.
- Search for "IMIKI SP1" in the list of available devices and select it to connect.
- Once connected, you will hear an audio prompt, and the indicator light on the earbuds will stop flashing.
Note: The earbuds will automatically reconnect to the last paired device when taken out of the case, if Bluetooth is enabled on the device.
Operating Instructions
The IMIKI SP1 earbuds are designed for intuitive use, primarily through touch controls. While specific gestures are not detailed, typical functions are as follows:
Power On/Off
- Power On: Open the charging case, and the earbuds will automatically power on and attempt to connect to the last paired device.
- Power Off: Place the earbuds back into the charging case and close the lid. They will automatically power off and begin charging.
Music Playback
- Play/Pause: Typically a single tap on either earbud.
- Next Track: Often a double tap on the right earbud.
- Previous Track: Often a double tap on the left earbud.
Call Management
- Answer/End Call: Typically a single tap on either earbud during an incoming call or an active call.
- Reject Call: Often a long press on either earbud during an incoming call.
Volume Control
The IMIKI SP1 earbuds support volume control. This is typically achieved through multiple taps or a long press on specific earbuds. Refer to your device's Bluetooth settings or the earbud's quick start guide for exact gestures.
Wearing the Earbuds
The earbuds are designed for a secure and comfortable fit. Insert each earbud gently into your ear canal and rotate slightly until it feels snug. The ergonomic design helps prevent them from falling out during activities.
Maintenance
Cleaning
- Regularly clean the earbuds and charging case with a soft, dry, lint-free cloth.
- Do not use abrasive cleaners, alcohol, or chemical solvents.
- Gently remove any earwax or debris from the earbud tips and speaker mesh using a small, soft brush or cotton swab.
Water Resistance (IPX4)
The IMIKI SP1 earbuds are IPX4 water-resistant, meaning they are protected from splashing water from any direction. This makes them suitable for workouts and light outdoor activities.
- Do NOT submerge the earbuds in water.
- Do NOT expose them to pressurized water or high-velocity water, such as showering or swimming.
- Ensure the earbuds are completely dry before placing them back into the charging case to prevent damage.
Storage
- When not in use, store the earbuds in their charging case to protect them and keep them charged.
- Store in a cool, dry place away from extreme temperatures and direct sunlight.
Troubleshooting
If you encounter any issues with your IMIKI SP1 earbuds, try the following solutions:
| Problem | Possible Solution |
|---|---|
| Earbuds not powering on | Ensure the charging case and earbuds are fully charged. Place earbuds in the case and close the lid, then open again. |
| Earbuds not pairing with device |
|
| Only one earbud working |
|
| Low volume or poor sound quality |
|
| Charging case not charging |
|
Specifications
| Feature | Detail |
|---|---|
| Brand | IMIKI |
| Model | SP1 |
| Type | Wireless Earbuds |
| Color Options | Black, Blue |
| Material | Metal |
| Connectivity | Bluetooth 5.4 Wireless Technology |
| Wireless Range | <10m |
| Vocalism Principle | Dynamic |
| Driver Size | 10mm |
| Audio Codecs | SBC |
| Battery Capacity (Earbud) | 40mAh (each earbud) |
| Battery Capacity (Charging Case) | 300mAh |
| Music Playtime (Single Charge) | Up to 5 hours |
| Total Playtime (with Charging Case) | Up to 24 hours |
| Charging Time | Approx. 2 hours to 100% |
| Charging Method | Charging case (USB-C port) |
| Water Resistance | IPX4 (Sweat and splash resistant) |
| Microphone | Yes |
| Active Noise-Cancellation | No |
| Volume Control | Yes |
| Control Button | No (Touch controls assumed) |
| Voice Assistant Built-in | No |
| Support APP | No |
| Earbud Weight | 5g (each) |
| Earbud Dimensions (approx.) | 29.8mm (L) x 23.2mm (W) x 34.1mm (H) |
| Charging Case Dimensions (approx.) | 69.2mm (L) x 43.5mm (W) x 28.6mm (H) |
| Product Weight (Earbuds + Case) | 53g |
| Package Weight | 180g |
| Package Dimensions | 10.6 x 10.6 x 6 cm |
| Operating Temperature | -10°C to 60°C (14°F to 140°F) |
| Certifications | CE, EAC, FCC, RoHS |
User Tips
- Optimal Fit: Experiment with the earbud placement to find the most comfortable and secure fit for your ears. A good seal enhances sound quality and bass response.
- Regular Cleaning: Clean your earbuds regularly to maintain hygiene and prevent sound degradation from earwax buildup.
- Battery Preservation: Store earbuds in the charging case when not in use to keep them protected and ensure they are always ready for use. Avoid fully draining the battery frequently.
- Connectivity: For the most stable connection, keep your connected device within the recommended Bluetooth range (<10m) and avoid physical obstructions.
Warranty and Support
IMIKI products are manufactured to the highest quality standards. For detailed warranty information and customer support, please refer to the official IMIKI website or contact your retailer. Keep your proof of purchase for warranty claims.
