Teka Ds60 De60

Contents

Teka Ds60 De60 Extractor Hood Filter User Manual

Model: Ds60 De60 | Dimensions: 280x320 mm

1. Introduction

This manual provides essential information for the safe and effective use, installation, and maintenance of your Teka Ds60 De60 Extractor Hood Filter. Please read these instructions carefully before use and retain them for future reference.

2. Safety & Warnings

  • Always disconnect power to the range hood before attempting to remove or clean the filter.
  • Wear protective gloves to avoid cuts from sharp edges during handling.
  • Do not touch the filter immediately after operation as it may be hot and cause burns. Allow it to cool completely.
  • Disposable filters should be replaced when dirty; do not wash and reuse them.
  • Metal filters should be replaced if they are broken, deformed, or permanently clogged.

3. Product Information

This product is a replacement filter designed for Teka Ds60 and De60 extractor hoods. It is classified as a Range Hood Part.

Product Name: Range Hood Filter
Model: Ds60 De60
Batch/Serial Number: 966512289476
Type: Range Hood Parts

Front view of the Teka Ds60 De60 Extractor Hood Filter

Figure 1: Front view of the extractor hood filter.

Angled view of the Teka Ds60 De60 Extractor Hood Filter

Figure 2: Angled view of the extractor hood filter.

Side view of the Teka Ds60 De60 Extractor Hood Filter

Figure 3: Side view of the extractor hood filter.

Another angled view of the Teka Ds60 De60 Extractor Hood Filter

Figure 4: Another angled view of the extractor hood filter.

4. Installation

Follow these steps to install the filter:

  1. Ensure the range hood is powered off and cool before beginning installation. Do not operate the range hood without a filter.
  2. Identify the correct orientation: the convex or labeled side of the filter usually faces outward, while the flat side faces inward.
  3. Carefully insert the filter into the designated slots or clips within the range hood.
  4. Ensure the filter is securely fixed in place to prevent oil leakage or excessive noise during operation.

Video 1: Product demonstration showing the filter from various angles and its installation process.

5. Cleaning & Maintenance

Regular cleaning of your metal filter is crucial for maintaining the efficiency of your extractor hood.

  • Cleaning Frequency: For normal use, clean the filter every 1-2 weeks. For heavy cooking, weekly cleaning is recommended.
  • Cleaning Method: Use warm water mixed with dish soap or baking soda. Soak the filter for 20-30 minutes, then gently brush to remove grease and residue.
  • Avoid: Do not boil the filter. Do not use strong acid/alkali cleaners or abrasive materials like steel wool, as these can damage the filter.
  • Drying: Ensure the filter is completely dry before reinstalling it into the range hood. Do not use a wet filter.

6. Troubleshooting

If you experience issues with your extractor hood after filter installation or cleaning, consider the following:

  • Reduced Airflow: Ensure the filter is clean and not clogged. If it's a metal filter and appears permanently clogged or damaged, it may need replacement.
  • Unusual Noise: Check that the filter is correctly and securely installed in its housing. A loose filter can vibrate and cause noise.
  • Oil Leakage: Verify the filter is installed in the correct direction and securely fastened to prevent oil from bypassing it.

If problems persist, consult your range hood's main instruction manual or contact a qualified technician.

7. Specifications

FeatureDetail
Dimensions (Length x Width)320 mm x 280 mm
Weight0.326 kg
Package Length37 cm
Package Width30 cm
Package Height2 cm
TypeRange Hood Parts
MaterialMetal (implied from cleaning instructions)
Dimensional drawing of the filter showing 280mm width and 320mm length

Figure 5: Dimensional drawing of the filter.

8. User Tips

  • Verify Dimensions: Always measure the exact dimensions of your existing filter before purchasing a replacement to ensure perfect compatibility.
  • Quantity: Unless explicitly stated otherwise, this product typically refers to a single filter. If you require multiple filters, adjust your order quantity accordingly.
  • Regular Inspection: Periodically inspect your filter for signs of wear, damage, or excessive clogging, even if it hasn't reached the recommended cleaning interval.

9. Manufacturer & EU Representative Information

Manufacturer: Xuzhou Lete Information Technology Co.,Ltd
Manufacturer Address: CN-No. 90 Huanghe North Road, Gulou District, Xuzhou City, Jiangsu Province (503-1, Building B1, Huaihai Cultural and Technological Industrial Park)
Manufacturer Email: m19852047965@163.com

EU Authorized Representative: VAT SPEED SL
EU Representative Address: Calle Antonio Salvador N99.128026 Madrid, Spain
EU Representative Email: services@vatspeed-eu.com

10. Compliance Information

This product complies with CE certification standards.

CE mark and WEEE symbol indicating compliance with European standards for product safety and waste electrical and electronic equipment disposal.

Figure 6: CE Mark and WEEE Symbol.

11. Warranty & Support

For any questions regarding the product, its operation, or potential issues, please contact the seller or manufacturer directly using the contact information provided in Section 9. Please retain your proof of purchase for any warranty claims.

A user manual in PDF format is available for download from the seller's product page for additional details.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.