KEEGAR G738

Contents

KEEGAR G738 RF Detector Instruction Manual

Guard your privacy in various scenarios by detecting hidden cameras, bugs, and GPS trackers.

1. Product Overview

The KEEGAR G738 RF Detector is a high-performance device designed to protect your privacy. It features a high-sensitivity digital chip controller, a 10-level LED signal intensity display, and adjustable sensitivity with memory function. With a built-in 1000mAh lithium battery, it offers 12-15 hours of continuous operation. It's capable of accurately detecting hidden WiFi cameras, audio bugs, and GPS trackers, as well as harmful electromagnetic radiation.

KEEGAR G738 RF Detector with antennas and camera scanner

Figure 1: KEEGAR G738 RF Detector and accessories.

2. Package Contents

  • 1 x KEEGAR G738 RF Detector
  • 3 x Antennas (GSM, RF, 5.8G)
  • 1 x USB Camera Scanner
  • 1 x Type-C Charging Cable
  • 1 x User Manual (this document)

3. Setup Guide

3.1 Installing Antennas

  1. Carefully screw each antenna into its corresponding socket on the top of the detector. Ensure the GSM antenna is in the GSM socket, the RF antenna in the RF socket, and the 5.8G antenna in the 5.8G socket.
  2. Tighten them securely but do not overtighten.

Video 1: Demonstrates antenna installation and basic operation.

3.2 Powering On/Off

  • To power on, slide the switch located on the side of the device to the 'ON' position. The device will power on and the LED indicators will light up.
  • To power off, slide the switch to the 'OFF' position.

3.3 Adjusting Sensitivity

The detector has 10 sensitivity levels, indicated by the LED bar. Adjusting sensitivity is crucial for accurate detection.

  • Press the 'UP' key to increase sensitivity. Each press increases the sensitivity by one level.
  • Press the 'DOWN' key to decrease sensitivity. Each press decreases the sensitivity by one level.
  • One illuminated LED lamp represents Level 1 sensitivity.
G738 RF Detector showing sensitivity levels and features

Figure 2: G738 RF Detector displaying sensitivity levels (1-10) and key features.

3.4 Attaching Camera Scanner

  • Plug the USB camera scanner into the USB port on the side of the detector.
  • Short press the button below the camera scanner to cycle through its light modes: blinking, blinking once per second, blinking once per half second, blinking once per 0.1 second, and off.
USB Camera Scanner with red filter and LEDs

Figure 3: The USB Camera Scanner accessory.

4. Operating Instructions

4.1 RF Signal Detection (General)

The G738 detector can identify various RF signals from hidden cameras, bugging devices, mobile phones, radios, unknown GPS trackers, and audio listening devices. The device will alarm when a strong RF signal is detected.

G738 RF Detector in a car detecting various hidden devices

Figure 4: The G738 detector can identify ALL Hidden Cameras / Audio Bugs / Cellphone Eavesdrop / GPS Trackers.

4.2 Mobile Phone Signal Detection

When detecting mobile phone signals, it is recommended to set the sensitivity to a lower level (e.g., Level 2) due to the relatively strong nature of these signals. The device will alarm intermittently when a phone is dialing and continuously when a call is connected. The alarm will stop when the call ends.

G738 RF Detector detecting mobile phone signals

Figure 5: G738 RF Detector detecting mobile phone signals in a room.

4.3 GPS Locator Detection

Most bugs and GPS locators use mobile phone cards for communication. To detect GPS locators, drive your car to an area with weak signal. At this time, the GPS locator will continuously send signals to the server, making it easier for the detector to find them. The G738 can accurately locate car tracking devices and magnetic devices.

GPS LOCATOR DETECTION with car and satellites

Figure 6: GPS LOCATOR DETECTION: Accurately locate car tracking devices and magnetic devices.

4.4 WiFi Camera Detection

WiFi camera signals are generally weaker. Increase the detector's sensitivity to Level 7 or 8. Move the RF detector around the area. When it approaches a WiFi camera, it will alarm. Moving it away will stop the alarm. This principle allows detection of spy cameras installed in walls, wall switches, and other hidden places.

G738 RF Detector detecting hidden devices in various rooms

Figure 7: G738 RF Detector detecting hidden devices in various rooms like meeting rooms, family rooms, bedrooms, bathrooms, hotels, and cars.

4.5 Camera Lens Reflection Detection

To find hidden cameras, plug in the USB camera scanner. Hold the detector and face the area you want to inspect. The infrared lights from the scanner will illuminate even the tiniest pinhole camera lens. Look through the red-tinted viewfinder of the scanner; a camera lens will appear as a bright light spot.

G738 RF Detector with infrared scanning technology

Figure 8: G738 RF Detector utilizing Infrared scanning technology, Artificial intelligent detection, and Strong magnetic detection.

4.6 Harmful Electromagnetic Radiation Detection

The G738 can also detect harmful electromagnetic radiation from household appliances like microwave ovens, and radiation from base stations near your work environment or home. Set the detector sensitivity to Level 1 and approach the appliance. A full alarm indicates high radiation levels.

G738 RF Detector detecting electromagnetic radiation

Figure 9: G738 RF Detector detecting electromagnetic radiation with a frequency range of 100MHz-8GHz and a detection range of 10 square meters.

5. Specifications

AttributeValue
Brand NameKEEGAR
Product NameG738 High - Sensitivity RF Detector
OriginMainland China
CertificationCE, FCC
Signal Indication10 - level LED signal intensity display
FunctionDetect hidden WiFi cameras, audio bugs, GPS trackers, cellphone eavesdropping
BatteryBuilt - in 3.7V 1000mAh lithium battery
Working Time12 - 15 hours continuous working
Sensitivity Adjustment6 levels for RF signal, with memory function
Alarm MethodAudible buzzer alarm
Detection RangeVaries by signal type, effective for hidden devices (up to 15m² for some signals)
MaterialAluminum alloy
PortabilityCompact and lightweight, easy to carry

6. Maintenance

  • Keep the device clean and free from dust. Use a soft, dry cloth for cleaning.
  • Avoid exposing the device to extreme temperatures, humidity, or direct sunlight.
  • Store the device in a cool, dry place when not in use.
  • Charge the device regularly, even if not in frequent use, to maintain battery health.

6.1 Charging the Device

  • Plug the provided Type-C cable into the device's charging port.
  • Connect the other end of the cable to a mobile phone charger or a USB port on your computer.
  • The charging indicator will show the charging status.

7. Troubleshooting

  • False Alarms during RF Detection: Ensure your mobile phone is in airplane mode or turned off when performing RF detection to avoid interference from its constant connection to the server.
  • Weak or No Detection: Increase the sensitivity level using the 'UP' button. Ensure antennas are correctly installed and tightened.
  • Camera Scanner Not Lighting Up: Ensure the camera scanner is fully plugged into the USB port and press its button to cycle through light modes.
  • Battery Not Charging: Check the Type-C cable and charger for damage. Ensure the connections are secure.

8. User Tips

  • For best results, perform detection in a quiet environment to clearly hear the audible alarms.
  • When searching for hidden cameras with the scanner, slowly sweep the area and pay close attention to any bright reflections through the viewfinder.
  • Experiment with different sensitivity levels to find the optimal setting for your specific detection environment.
  • Regularly check the device's battery level to ensure it's ready for use when needed.

9. Warranty and Support

This product comes with a standard manufacturer's warranty. For any technical support or warranty claims, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

© 2023 KEEGAR. All rights reserved.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.