ULTIMEA Skywave F30

Contents

ULTIMEA Skywave F30 3.1.2ch Dolby Atmos Sound Bar User Manual

Model: Skywave F30

Introduction

The ULTIMEA Skywave F30 is a 3.1.2 channel Dolby Atmos sound bar system designed to deliver an immersive audio experience for your home entertainment. It features front-firing drivers, two up-firing speakers, and a powerful 5.25-inch wired subwoofer to create a multidimensional sound field. This manual provides essential information for setting up, operating, and maintaining your sound bar.

ULTIMEA Skywave F30 Sound Bar with Subwoofer and Remote

Figure 1: ULTIMEA Skywave F30 Sound Bar System Overview

Important Safety Information

  • Read these instructions carefully before using the product.
  • Keep these instructions for future reference.
  • Do not expose this appliance to dripping or splashing liquids.
  • Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
  • Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
  • Only use attachments/accessories specified by the manufacturer.
  • Refer all servicing to qualified service personnel.

Package Contents

Please check that all items are present and in good condition:

  • ULTIMEA Skywave F30 Sound Bar (two parts)
  • Wired Subwoofer (5.25 inch)
  • Remote Control
  • Power Adapter
  • HDMI Cable
  • User Manual

Setup

1. Assembling the Sound Bar

The sound bar comes in two parts for easy packaging. To assemble, align the joints of the two parts and twist to connect them securely.

Diagram showing how to connect the two parts of the soundbar

Figure 2: Sound Bar Assembly Steps

2. Connecting the Subwoofer

Connect the wired subwoofer to the "SUB OUT" port on the sound bar using the provided cable.

ULTIMEA Subwoofer with BassMX Technology

Figure 3: 5.25-inch Wired Subwoofer

3. Power Source and Wiring

Connect the power adapter to the DC IN port on the sound bar and then plug it into a wall outlet. Ensure all audio connections are made before powering on.

Rear panel of the soundbar showing input ports: HDMI to TV (eARC), Optical, USB, Sub Out, DC In

Figure 4: Sound Bar Rear Panel Connections

4. Connecting to TV

You have several options for connecting your sound bar to your TV:

  • HDMI eARC (Recommended for Dolby Atmos): Connect the HDMI cable between your TV's HDMI eARC/ARC port and the sound bar's HDMI to TV (eARC) port. Then, press "eARC" on the remote control to select the input. This connection supports uncompressed high-definition audio, including Dolby Atmos.
  • Diagram showing HDMI eARC connection from TV to soundbar and remote input selection

    Figure 5: HDMI eARC Connection

  • Optical Input: Connect an optical cable between your TV's DIGITAL AUDIO OUT (OPTICAL) port and the sound bar's OPTICAL port. Press "OPT" on the remote to select this input. Note: Optical input does not support Dolby Atmos.
  • Diagram showing Optical connection from TV to soundbar and remote input selection

    Figure 6: Optical Connection

  • Bluetooth: For wireless audio streaming from mobile devices, refer to the "Bluetooth Pairing" section in Operating Instructions.
  • USB: The USB port supports MP3 files with a maximum memory of 128GB.

Operating Instructions

1. Power On/Off

Press the power button on the sound bar or the remote control to turn the system on or off.

2. Input Selection

Use the "Source" button on the remote control or the sound bar to cycle through available inputs: HDMI (eARC), Optical, Bluetooth, USB.

3. Volume Control

Adjust the volume using the Volume Up (+) and Volume Down (-) buttons on the remote or sound bar.

4. Sound Modes and EQ Settings

The sound bar offers various sound modes and extensive EQ customization:

  • Preset EQ Modes: Select from Movie, Music, Voice, Sport, Game, and Night modes using the remote or the ULTIMEA App.
  • Custom EQ via App: Use the ULTIMEA App to access a 10-band graphic equalizer and 121 EQ matrix presets for fine-tuning your audio.
ULTIMEA App interface showing sound effects, EQ, power, source selection, and firmware upgrade options

Figure 7: ULTIMEA App Control Interface

ULTIMEA App interface showing 10-band graphic equalizer settings

Figure 8: 10-Band Graphic Equalizer Settings in App

5. Bluetooth Pairing

To pair your mobile device with the sound bar via Bluetooth 5.4:

  1. Press the Bluetooth button on the remote or sound bar to enter Bluetooth pairing mode. The indicator light will flash.
  2. On your mobile device, search for "ULTIMEA Skywave F30" in the Bluetooth settings and select it to connect.
  3. Once connected, the indicator light will stop flashing.
Person streaming music via Bluetooth 5.4 to the soundbar

Figure 9: Bluetooth 5.4 Connectivity

6. CEC Function

If connected via HDMI eARC, the CEC (Consumer Electronics Control) function allows you to control basic functions of the sound bar (like power, volume, and input selection) using your TV remote. Ensure CEC is enabled on both your TV and the sound bar.

Remote control highlighting CEC function

Figure 10: Remote Control with CEC Function

Maintenance

  • Cleaning: Use a soft, dry cloth to clean the surfaces of the sound bar and subwoofer. Do not use liquid cleaners or abrasive materials.
  • Ventilation: Ensure the sound bar and subwoofer have adequate ventilation. Do not block any vents.
  • Storage: If storing the unit for an extended period, disconnect it from the power outlet and store it in a cool, dry place.

Troubleshooting

ProblemPossible CauseSolution
No sound
  • Power not connected.
  • Incorrect input selected.
  • Volume too low or muted.
  • Cables not connected properly.
  • Ensure power adapter is plugged in.
  • Select the correct input source (e.g., HDMI, Optical, Bluetooth).
  • Increase volume or unmute.
  • Check all cable connections (HDMI, Optical, Subwoofer).
No Dolby Atmos sound
  • Not using HDMI eARC connection.
  • TV or source device not configured for Dolby Atmos.
  • Ensure connection is via HDMI eARC. Optical input does not support Dolby Atmos.
  • Check your TV and source device (e.g., Blu-ray player, streaming box) audio settings to ensure Dolby Atmos output is enabled.
Bluetooth pairing issues
  • Sound bar not in pairing mode.
  • Device too far from sound bar.
  • Ensure sound bar is in Bluetooth pairing mode (flashing indicator).
  • Move your device closer to the sound bar.
  • Forget the device on your phone and try pairing again.

Specifications

FeatureDetail
Brand NameULTIMEA
ModelSkywave F30
Speaker TypeSound Bar
Speaker Channel3.1.2
Input Power (W)300-399 W
PMPO300W
Audio CrossoverFull-Range
Frequency Response40Hz - 18kHz
Bluetooth Version5.4
CommunicationAUX, Optical Input, Coaxial Input, Bluetooth, HDMI-Compatible
Connectivity TechnologyHDMI-eARC/Bluetooth5.4/Optical/Auxiliary/USB
Sound ModeHi-Res Sound Mode, 3D Surround Sound Mode, Immersive Sound Mode, Stereo Sound Mode, Smart Sound Mode, Live Sound Mode, Extra Bass Mode, Transparency Mode, Sleeping Mode, Standard Mode, Game Mode, 3EQ Modes
Listening Modes (EQ)Movie / Music / Voice / Sport / Game / Night
Control TypeVolume control, Input selector, EQ
Support APPYes
Display ScreenYes
Built-in MicrophoneYes
Cabinet MaterialPlastic (Sound Bar), Wooden (Subwoofer)
Weight6500g
Depth335mm
Width195mm
Height448mm
Power SourceAC
Inbox adaptorYes
CertificationCE, FCC, RoHS

User Tips

  • For the best Dolby Atmos experience, always use the HDMI eARC connection and ensure your TV and content support Dolby Atmos.
  • Experiment with the different EQ modes (Movie, Music, Game, etc.) and the custom equalizer in the ULTIMEA App to find the sound profile that best suits your content and personal preference.
  • Keep the sound bar and subwoofer clear of obstructions to ensure optimal sound dispersion and bass performance.
  • Regularly check the ULTIMEA App for firmware updates to ensure your sound bar has the latest features and performance enhancements.

Warranty and Support

This product comes with a 1-year warranty from the date of purchase. For technical support, troubleshooting assistance, or warranty claims, please contact ULTIMEA customer service through their official channels.

Product Video Overview

Video: ULTIMEA Skywave F30 Sound Bar Features and Benefits


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.