SoBuy FSR16-K-W

Contents

SoBuy FSR16-K-W Shoe Bench with Seat Cushion

Model: FSR16-K-W

Brand: SoBuy

Introduction

This manual provides comprehensive instructions for the assembly, operation, and maintenance of your SoBuy FSR16-K-W Shoe Bench with Seat Cushion. Please read all instructions carefully before beginning assembly or use to ensure safe and correct product handling. Keep this manual for future reference.

SoBuy FSR16-K-W shoe bench in an entryway with decorative items.
The SoBuy FSR16-K-W shoe bench, designed for entryways.

Important Safety Information

Failure to follow these warnings may result in serious injury or death.

  • Do not allow children to assemble the product. During assembly, keep small parts out of children's reach, as they may cause fatal choking or suffocation if swallowed or inhaled.
  • Do not allow children to climb on or play with the product to prevent injury from tipping.
  • Keep plastic bags away from children to avoid suffocation hazards.
  • Avoid sharp objects and corrosive chemicals to prevent product damage or injury.
  • Do not use this product if it is defective or parts are missing, as it may cause damage or injury.
  • If the product includes an anti-tip device, install it to prevent tipping and injury.
  • If the product is plugged into an outlet, keep it away from water and moisture to prevent electric shock or short circuits.
Warning icons showing a panda with an X over it for climbing, playing, and assembling, and a checkmark for adult supervision.
Visual warnings against children climbing, playing, or assembling the product.

Package Contents

Before assembly, ensure all parts and hardware are present and undamaged. If any parts are missing or damaged, do not proceed with assembly and contact customer support.

Tools Required:

  • Phillips Head Screwdriver
  • Hammer

Parts List (Refer to diagram on page 8 of the PDF manual for visual identification):

  1. Part 1
  2. Part 2
  3. Part 3
  4. Part 4
  5. Part 5
  6. Part 6
  7. Part 7
  8. Part 8
  9. Part 9
  10. Part 10

Hardware List (Refer to diagram on page 8 of the PDF manual for visual identification and exact quantities):

  • A: M6*35 Bolts
  • C: M4*14 Screws
  • D: M3*14 Screws
  • F: M4*14 Screws
  • G: 30*30 Brackets
  • H: Ø15*10 Dowels
  • J: 26*9*17 Connectors
  • K: 13*10 Plugs
  • L: 260*240*3 Flap Hinges
  • M: 96mm Handle
  • N: Ø13.5*9.5 Pins
  • O: 30*11*2 Flap Supports
  • Q: Ø8*30 Dowels
  • R: 260*240*3 Flap Hinges
  • S: M6*14 Screws
Diagram showing the dimensions of the shoe bench: 60cm width, 47cm height, 24cm depth, with cushion dimensions and handle placement.
Overall dimensions of the SoBuy FSR16-K-W shoe bench.

Assembly Instructions

Estimated assembly time: Approximately 30 minutes for 1 person. Please follow the steps carefully.

General Bolt Installation Guide:

Ensure connecting pieces are oriented correctly. Insert bolts only when the connecting piece is properly aligned. Refer to the diagram on page 9 of the PDF manual for visual guidance on bolt installation (A1-A5).

Step-by-Step Assembly:

  1. Step 1 (Page 10): Attach part (1) and part (2) using M6*35 bolts (A), 26*9*17 connectors (J), and Ø8*30 dowels (O). Ensure all connections are secure.
  2. Step 2 (Page 10): Connect parts (8), (3), and (4) to part (1) using M4*14 screws (B), Ø15*10 dowels (H), and Ø8*30 dowels (Q).
  3. Step 3 (Page 11): Slide part (10) into the grooves of the assembled structure.
  4. Step 4 (Page 11): Secure part (2) to the top of the structure using Ø15*10 dowels (H).
  5. Step 5 (Page 12): Attach the flap front panel (5) to the main body using 30*30 brackets (F) and Ø15*10 dowels (G).
  6. Step 6 (Page 12): Secure the back panel (7) to the main body using M4*14 screws (D) and 13*10 plugs (K).
  7. Step 7 (Page 13): Attach the flap hinges (L and R) to the flap bottom support (6) using M6*14 screws (F).
  8. Step 8 (Page 14): Install the flap supports (N) and M6*14 screws (S) to the main body, connecting them to the flap mechanism.
  9. Step 9 (Page 14): Attach the handle (M) to the flap front panel (5) using M3*14 screws (C) and M6*14 screws (F).
  10. Step 10 (Page 15): Place the top panel (9) onto the assembled unit.

Specifications

Feature Detail
Model FSR16-K-W
Color White
Material PB(E1)
Product Dimensions (W x H x D) Approx. 60 x 47 x 24 cm
Package Dimensions (L x W x H) Approx. 67 x 57 x 15 cm
Product Weight Approx. 10.3 kg
Load Capacity Up to 120 kg
Front view of the SoBuy FSR16-K-W shoe bench with a grey seat cushion.
Front view of the shoe bench.

Operating Instructions

The SoBuy FSR16-K-W shoe bench is designed for convenient shoe storage and comfortable seating in your entryway.

  • Shoe Storage: The bench features a flap mechanism for space-saving storage of your shoes. Gently pull the handle to open the flap and access the shoe compartments.
  • Seating: The integrated seat cushion provides a comfortable surface for putting on or taking off your shoes.
  • Stability: Rubber feet ensure a secure stand and protect your floor from scratches and marks.
The shoe bench with its flap open, revealing two rows of shoes stored inside.
The shoe bench with its flap open, demonstrating shoe storage.
Close-up of the curved silver handle on the shoe bench flap.
Close-up of the handle for opening the shoe flap.

Maintenance

  • Cleaning: Wipe the surfaces with a soft, damp cloth. Avoid using abrasive cleaners or harsh chemicals, as these can damage the finish.
  • Cushion Care: The seat cushion can be spot cleaned with a mild detergent. Allow to air dry completely.
  • Regular Checks: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary to maintain stability.
  • Avoid Moisture: Keep the product away from excessive moisture and direct sunlight to prevent warping or discoloration.

Troubleshooting

If you encounter any issues with your shoe bench, please refer to the following common solutions:

  • Wobbly or Unstable: Check all assembly screws and bolts. Ensure they are fully tightened. Make sure the product is placed on a flat, even surface.
  • Flap Not Opening/Closing Smoothly: Inspect the hinges and ensure no obstructions are present. Check if the flap supports (N) are correctly installed and not bent.
  • Missing Parts: If you discover any missing parts during assembly, please contact customer support immediately.

User Tips

  • Users have found the assembly process to be straightforward.
  • The product is noted for its good quality and stable impression once assembled.
  • Consider using a soft cloth for regular dusting to keep the white finish pristine.

Warranty and Support

For any questions, concerns, or support needs regarding your SoBuy FSR16-K-W shoe bench, please contact our customer service team.

Customer Service Email: cs@sobuy-shop.com

When contacting support, please provide your website, order number, and tracking number for faster assistance. If reporting damage or defects, please include 2-3 photos (preferably in JPG or PDF format) showing the damaged parts and the package.

A user manual in PDF format is also available for download and detailed reference: SoBuy FSR16-K-W User Manual (PDF).

Return Policy

Information regarding returns and exchanges is available. For details on the return process, please contact our customer service team at the email address provided above.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.