1. Introduction
The ANDELI MCT-416P is a versatile 6-in-1 multi-process welding machine designed for a wide range of welding and cutting tasks. It combines HF TIG, HF CUT, Pulse MIG, SYN MIG, MAN MIG, Stick (MMA), and Flux Core welding modes, making it suitable for both professionals and DIY enthusiasts. This manual provides essential information for the safe and effective operation, setup, and maintenance of your MCT-416P welder.
Video: Overview of the MCT-416P's welding and cutting capabilities.
2. Safety Information
WARNING: Always read and understand all safety precautions before operating this equipment. Failure to follow safety instructions can result in serious injury or death.
- Electrical Safety: Ensure the machine is connected to a 220V power supply. Always use appropriate personal protective equipment (PPE) including welding helmets, gloves, and protective clothing.
- Fume Hazards: Welding and cutting produce fumes and gases. Work in a well-ventilated area or use local exhaust ventilation.
- Arc Rays: Arc rays can injure eyes and burn skin. Wear a welding helmet with appropriate shade lenses and protective clothing.
- Fire and Explosion: Welding and cutting can cause fire or explosion. Keep flammable materials away from the work area.
- Hot Parts: Hot metal and equipment can cause severe burns. Allow equipment to cool before handling.
- Gas Cylinders: Handle gas cylinders with care. Secure them properly to prevent falling.
For detailed safety guidelines, refer to the complete user manual PDF: User Manual (PDF)
3. Product Overview and Features
The ANDELI MCT-416P is a robust and versatile welding and cutting solution. Key features include:
- 6-in-1 Functionality: HF TIG, HF CUT, Pulse MIG, SYN MIG, MAN MIG, Stick (MMA), and Flux Core welding modes.
- Pulsed MIG Aluminum Welder: Advanced IGBT inverter and pulsed arc technology for smooth, stable, and spatter-reduced aluminum welding.
- HF TIG: Powerful 160A output for precise welds on thin metals and stainless steel, with non-contact arc ignition.
- HF CUT: 10-40A adjustable output for clean cuts up to 15mm (0.6") on 220V, with non-contact arc ignition for painted and rusty surfaces.
- 5-inch LED Display: Large, high-definition display for clear visibility and easy parameter adjustment.
- Automatically Memorized Settings: Auto-save and recovery of welding parameters for repeatable precision.
- 2T/4T Modes: Offers 2T (non-self lock) for quick fixing and tack welding, and 4T (self-lock) for production welding and consistent results.
- Spot Welding: Provides fast, cost-effective, and durable joins with minimal distortion.
- 220V Voltage: Provides flexibility and adaptability for users across different environments.

Image: The 6-in-1 multifunctional welder modes.

Image: The 5-inch LED display for enhanced visibility and parameter adjustment.
4. Accessories
The MCT-416P comes with a comprehensive set of accessories to support its various functions. Please ensure all items are present upon unboxing.

Image: Included accessories for the MCT-416P.
- Gas Hose
- Ground Clamp
- MMA Holder
- Air Filter Regulator
- Knurl Groove Drive Roller
- Hose Hoop
- Pneumatic Joint
- Hose Barb
- Graphene Liner
- TIG Torch
- Power Adapter Cord
- Plasma Cutting Torch
- MIG Torch
5. Setup
5.1 Machine Overview and Panel Functions
Familiarize yourself with the machine's layout and control panel before operation.

Image: Machine Overview with labeled components.
- Parameter Button
- Torch Modes Button
- Voltage Adjust Knob
- Main Menu Function Button
- Wire Diameter Selection Button
- Weld Material Selection Button
- Amps Parameters Adjust Knob
- EURO Connector for MIG Gun
- Control Switch Socket
- Positive (+) Output Terminal
- Negative (-) Output Terminal
- CUT Ground Clamp
- CUT/HF TIG Gun Connector
- Power Switch
- Power Input Cable with Plug
- Ground Pin
- Air Filter Regulator Connection
- Fan
- MIG Gas Connector
- CUT Gas/TIG Gas Connector

Image: Control Panel Introduction with labeled functions.
- Input Voltage
- MIG parameters adjustment
- Torch process methods
- Wire diameter selection
- Voltage display area / current display area
- MMA parameters adjustment
- Material/Gas Selection
- Modes Selection
5.2 Power Connection
Connect the power input cable (15) to a suitable 220V power outlet. Ensure the power switch (14) is in the OFF position before connecting.

Image: 220V Voltage connection.
5.3 Ground Clamp Connection
Connect the ground clamp (2) to the workpiece. Ensure a clean, solid electrical connection for optimal performance and safety.
5.4 Gas and Air Connections
For MIG, TIG, and Plasma Cutting processes requiring shielding gas or compressed air:
- Air Filter Regulator: Install the air filter regulator (4) to the Air Filter Regulator Connection (17) on the rear panel. Connect your compressed air supply to the regulator.
- Gas Hose: Connect the gas hose (1) to the appropriate gas connector on the rear panel (MIG Gas Connector (19) or CUT Gas/TIG Gas Connector (20)) and to your gas cylinder.
- Pneumatic Joint & Hose Barb: Use the pneumatic joint (7) and hose barb (8) as needed for secure connections.

Image: Rear panel connections for gas and air filter regulator.
5.5 Torch Assembly
Connect the appropriate torch (MIG, TIG, or Plasma Cutting) to its designated connector on the front panel (EURO Connector for MIG Gun (8) or CUT/HF TIG Gun Connector (13)).
6. Operating Instructions
The MCT-416P features an intuitive 5-inch LED display for easy mode and parameter selection.
6.1 General Operation Steps
- Ensure all connections (power, ground, gas/air, torch) are secure.
- Turn on the power switch (14) on the rear panel.
- Use the Main Menu Function Button (4) and Modes Selection (8) knob to select your desired welding or cutting process (HF TIG, HF CUT, Pulse MIG, SYN MIG, MAN MIG, Stick/MMA, Flux Core).
- Adjust parameters using the Parameter Button (1), Voltage Adjust Knob (3), Amps Parameters Adjust Knob (7), Wire Diameter Selection Button (5), and Weld Material Selection Button (6) as needed for your specific task. The 5-inch LED display will show all parameters clearly.
- Begin welding or cutting, always wearing appropriate PPE.
6.2 Specific Mode Operations
6.2.1 Pulse MIG Welding (Aluminum)
This mode is ideal for advanced materials, thin metals, and aluminum (AlMg). It ensures a smooth, stable, and spatter-reduced welding experience.

Image: Pulse MIG welding for aluminum, showing a strong weld.
6.2.2 HF TIG Welding
Provides precise control for flawless welds on thin metals and stainless steel. The HF (High Frequency) start ensures a clean arc without touching the workpiece.

Image: HF TIG welding in action.

Image: Example of an HF TIG weld bead.
6.2.3 HF Plasma Cutting
Offers high-speed precision for clean and smooth cuts. The HF start allows cutting through painted and rusty surfaces effortlessly.

Image: Plasma cutting a 15mm metal plate at 220V.

Image: Powerful HF Plasma Cutter in action.
6.2.4 MMA (Stick) Welding
Provides portability, versatility, and strong, reliable joints in challenging environments.

Image: MMA welding in progress.

Image: Example of an MMA weld bead using a 2.5 welding rod.
6.3 2T/4T and Spot Welding
The machine supports different torch trigger modes:
- 2T (Non-Self Lock): For quick fixing and tack welding, where the arc is active only while the trigger is pressed.
- 4T (Self-Lock): For production welding, overhead/vertical positions, or critical welds requiring consistency, where the arc remains active after a brief trigger press until pressed again.
- Spot Welding: For providing fast, cost-effective, and durable joins with minimal distortion.

Image: Control panel highlighting 2T, 4T, and Spot welding modes.
7. Maintenance
Regular maintenance ensures the longevity and optimal performance of your MCT-416P welder.
- Cleaning: Regularly clean the machine's exterior and ventilation openings to prevent dust and debris buildup. Use compressed air to clear internal components if necessary, ensuring the machine is unplugged.
- Torch and Consumables: Inspect torches, cables, and consumables (nozzles, electrodes, contact tips, diffusers) before each use. Replace worn or damaged parts promptly.
- Gas/Air Lines: Check gas and air lines for leaks or damage. Ensure connections are tight.
- Power Cable: Inspect the power cable for any cuts, fraying, or damage.
- Storage: Store the machine in a clean, dry environment, away from excessive dust, moisture, and extreme temperatures.
8. Troubleshooting
This section provides solutions to common issues. For more complex problems, consult the full PDF manual or contact customer support.
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Power switch off, loose connection, circuit breaker tripped | Check power switch, connections, and circuit breaker. |
| No arc / Weak arc | Poor ground connection, incorrect settings, worn consumables | Ensure good ground, verify settings, replace consumables. |
| Excessive spatter (MIG) | Incorrect voltage/wire speed, insufficient gas flow, dirty workpiece | Adjust parameters, check gas supply, clean workpiece. |
| Poor cut quality (Plasma) | Incorrect air pressure, worn consumables, too fast/slow travel speed | Adjust air pressure, replace consumables, optimize travel speed. |
| Display icon not showing | LCD panel defect | Contact customer support for assistance. |
9. Specifications
The following are the general specifications for the ANDELI MCT-416P Multi-Process Welder:
- Model Number: MCT-416P
- Brand Name: ANDELI
- Dimensions: 585*38*365mm
- Weight: 9.7KG
- Certification: CE
- Use: Welding and Cutting
- Plug Type: EU Plug (ensure compatibility with local power outlets)
- Is Smart Device: No
- High-concerned chemical: None
- Origin: Mainland China
10. Warranty and Support
The ANDELI MCT-416P Multi-Process Welder is backed by a two-year warranty, which includes free replacement parts. For warranty claims, technical support, or any inquiries, please contact ANDELI Official Store customer service.
11. User Tips
- Read the Manual: For complex operations and detailed explanations, always refer to the comprehensive user manual PDF.
- Gas Supply: If using gas-shielded processes (MIG, TIG), ensure you have the correct shielding gas (e.g., Argon for TIG) and that the cylinder is properly connected and regulated.
- Aluminum Welding: The Pulse MIG mode is specifically designed for aluminum, offering excellent results. Experiment with settings to find the optimal parameters for your specific aluminum alloy and thickness.
- Check Packaging: Upon delivery, inspect the packaging and contents for any damage. Report issues immediately.
- Display Issues: If any icons on the LED display are not showing correctly, it may indicate an LCD panel defect. Contact customer support for diagnosis and resolution.