VTOMAN FlashSpeed1500 Extra Battery

Contents

VTOMAN FlashSpeed 1500 Extra Battery User Manual

Model: FlashSpeed1500 Extra Battery (PB-81)

Introduction

The VTOMAN FlashSpeed 1500 Extra Battery is designed to expand the power capacity of your VTOMAN FlashSpeed 1000 or FlashSpeed 1500 Power Station. This external battery provides an additional 1548Wh of capacity, ensuring longer power supply for your outdoor adventures, emergency backup, or home energy needs.

Safety Instructions and Warnings

Please read and understand all safety instructions before operating the device to prevent injury or damage.

  1. Please read the manual carefully before using this product.
  2. Please do not use other electronic products that exceed the battery specifications to avoid electric shock and product damage.
  3. Please do not use damaged output cables or plug-in terminals to use the battery to avoid electric shock and product damage.
  4. Please keep the battery dry, do not place it in water or damp places, to avoid electric shock and product damage.
  5. Please do not insert foreign objects into the input and output ports to avoid damage to the product.
  6. Please keep the product under well ventilated conditions.
  7. Please prevent the product from falling from a height.
  8. Please don't use it in an environment with too high or too low temperature, it may cause the product function failure, shorten the life span or damage.
  9. Please do not expose the product to fire or a temperature higher than 140°F, otherwise it may cause the product to catch fire, explode and other safety accidents.
  10. Do not expose the battery to rain, snow, frost, greasy and other harsh environments, which may cause the product to fail, shorten its lifespan, or be damaged.
  11. Do not try to disassemble the battery or allow non-professional technical personnel to disassemble, otherwise it may cause unknown risks such as electric shock, fire or even explosion.
  12. When not in use for a long time, please charge the battery every 12 months to prevent insufficient power.
  13. Please keep away from children to reduce possible risks.
  14. Under extreme conditions, battery leakage may occur. If your hands or other exposed parts of your body accidentally come into contact with them, please wash them off with soap and water immediately. If they get into your eyes, immediately rinse your eyes with cold water for at least 10 minutes, and then seek medical attention immediately.
  15. Please dispose of lithium battery products according to local laws and regulations at the end of the product life.

Package Contents

Please check the package for the following items:

  • 1 x FlashSpeed 1500 Extra Battery
  • 1 x CP3500 Connection Cable
  • 1 x User Manual
Package contents of VTOMAN FlashSpeed 1500 Extra Battery

Image: Package contents including the FlashSpeed 1500 Extra Battery, CP3500 Connection Cable, and User Manual.

Product Overview

Familiarize yourself with the components of your FlashSpeed 1500 Extra Battery:

Minimalist design of VTOMAN FlashSpeed 1500 Extra Battery with labeled parts

Image: Minimalist design of the extra battery, highlighting the Battery Indicator, Power Button, and CP3500 Connecting Port.

  1. Power Check Button: Press to check the battery level.
  2. Power Indicator Light: Displays the current battery charge level.
  3. CP3500 Connecting Port: Used to connect the extra battery to the main power station.

Setup

The VTOMAN FlashSpeed 1500 Extra Battery is compatible only with VTOMAN FlashSpeed 1000 and FlashSpeed 1500 Power Stations. It is not compatible with FlashSpeed 2400.

  1. Connect the Extra Battery: Use the provided CP3500 cable to connect the extra battery to your VTOMAN FlashSpeed 1000 or FlashSpeed 1500 Power Station. Ensure the connection is secure.
VTOMAN FlashSpeed 1500 Extra Battery connected to main power station

Image: The extra battery stacked and connected to the main power station, illustrating dual charge capability.

VTOMAN FlashSpeed 1500 Extra Battery expanding capacity

Image: Diagram showing the extra battery increasing the total capacity of the FlashSpeed 1500 Power Station from 1548Wh to 3096Wh.

Operating Instructions

  1. Output Priority: When no charger is plugged in, the extra battery will output power first. Once the extra battery is depleted, it will automatically switch to the main battery to continue output without interruption.
  2. Simultaneous Charging and Discharging: If the main battery is not fully charged, it will be charged and discharged first. Once the main battery is full, the system will automatically switch to charge and discharge the extra battery.
  3. Charging Display: During charging, the main battery's display shows its remaining power, and the extra battery's display shows its remaining power.
  4. Discharging Display: During discharging, the main battery's display shows the combined power of the main and extra batteries. The extra battery's display shows its own remaining power.

Note: When the main and extra battery are operating, do not directly disconnect the CP3500 cable, as this may interrupt the current output.

Maintenance

  • Keep the extra battery dry and clean. Avoid exposure to water, moisture, or extreme temperatures.
  • Store the battery in a well-ventilated area, away from direct sunlight and heat sources.
  • Charge the battery every 12 months if not in regular use to maintain battery health.
  • Avoid dropping the unit or subjecting it to strong impacts.

Troubleshooting

Trouble PhenomenonTrouble ShootingSolution
The product cannot be charged1. The product input interface is not connected well, and the charging indicator light is off.Reconnect the product input interface
2. The connection is good, but the charging indicator does not light.The charger is damaged. Contact after-sales service.
3. The charging indicator is on, but cannot be charged.If the product is damaged, please contact after-sales service.
The product cannot be output1. The main battery and the extra battery are not properly connected.Connect the main battery and extra battery correctly.
2. The battery is too low.Use the main battery with a charger to charge it.
3. The power of the equipment exceeds the scope of application of this product.Replace the product with a larger power battery or reduce the load power.
4. Tried all of the above and failed to eliminate the fault.The product is damaged, please contact the after-sales service.
The output is interrupted during use1. The power of the equipment exceeds the scope of this product.Replace the product with a larger specification.
2. The power of the device is too small, causing the product to fail to identify. Automatically turn off the output.Restart
3. Tried all of the above and failed to eliminate the fault.The product is damaged, please contact the after-sales service.

Specifications

ParameterValue
Product NameFlashSpeed 1500 Extra Battery
Model NumberPB-81
Battery Capacity1548Wh
Battery TypeLiFePO4
ApplicationHome Energy
Nominal Capacity>3500mAh
CertificationCE, FCC, RoHS, UL
Operating Temperature-20°C to 55°C (-4°F to 131°F)
Charging Temperature0°C to 55°C (32°F to 131°F)
Product Weight12.8KG
Product Size42 x 29.6 x 25.5 cm
OriginMainland China

Warranty and Support

The VTOMAN FlashSpeed 1500 Extra Battery comes with a 24-month warranty. The warranty period begins from the date of purchase by the original customer. For any quality issues or after-sales service, please provide proof of purchase or other valid information.

For detailed instructions and further information, you may refer to the official user manual PDF: VTOMAN FlashSpeed 1500 Extra Battery User Manual (PDF)

User Tips

  • Always ensure the CP3500 connection cable is securely attached to both the extra battery and the main power station for optimal performance and safety.
  • Regularly check the battery indicator lights on both units to monitor power levels, especially before extended use.

Product Video

Video: Unboxing and overview of the VTOMAN FlashSpeed 1500 Extra Battery.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.