ECHTPower Wireless Game Controller ES01 User Manual

1. Introduction

Thank you for choosing the ECHTPower Wireless Game Controller ES01. This manual provides essential information for setting up, operating, and maintaining your controller. Please read it carefully before use.

Package Contents

• Wireless Controller x1
• Charging Cable x1
• Instruction Manual x1

Compatibility

The ECHTPower ES01 controller is compatible with the following platforms:

• Nintendo Switch
• Nintendo Switch Lite
• Nintendo Switch OLED
• Nintendo Switch 2
• PC
• Android
• iOS

Figure 1: Controller and included accessories.

2. Specifications

Technical Parameters

3. Specification Diagram

Familiarize yourself with the layout and functions of your controller's buttons and features.

Figure 2: Front View of Controller

• Home Button: Powers on the controller.
• Screen Capture Button: Takes screenshots.
• Turbo Button (+ Button): Activates/deactivates Turbo function.
• A/B/X/Y Buttons: Standard action buttons.
• Left Joystick/L3: Left analog stick, press for L3.
• Right Joystick/R3: Right analog stick, press for R3.
• D-pad: Directional pad.
• M Button: Macro programming button.

Figure 3: Back View of Controller

• R Button: Right shoulder button.
• L Button: Left shoulder button.
• ZR Button: Right trigger button.
• ZL Button: Left trigger button.
• Type-C Charging Port: For charging the controller.
• Charging Indicator: Shows charging status.
• Pairing Button: Initiates pairing mode.
• Channel LED: Indicates connected channel.
• ML Button: Left macro button.
• MR Button: Right macro button.
• Vibration Switch: Controls vibration function.
• Light Switch Key: Controls LED lighting.

4. Setup and Connection

Initial Activation

Before initial use, the controller needs to be charged using the provided data cable to activate it.

Power On/Off

• Power On: Press the Home button lightly.
• Power Off: Press the pairing button lightly.

Connection Methods for Various Devices

Note: When the Switch is wired, ensure that the "Settings → Handle and Sensor → Pro Handle Wired Connection" function is enabled on your Switch console.

5. Operating Instructions

Turbo Rapid Fire Function

Supported buttons: A/B/X/Y/L/R/ZL/ZR/D-pad

• Manual Turbo: Hold the T button, then press and hold one of the supported buttons for 3 seconds. The controller will vibrate once to activate manual rapid fire.
• Automatic Turbo: Hold the T button, then press and hold the button already configured for manual rapid fire again for 3 seconds. The controller will vibrate once to activate automatic rapid fire.
• Disable Turbo: Hold the T button, then press and hold the button configured for automatic rapid fire again for 3 seconds. The controller will vibrate once to disable the rapid fire function for that button.
• Clear All: Press and hold the "TURBO" button for 3 seconds to clear rapid fire settings for all buttons.
• Speed Adjustment: Rapid fire speed can be adjusted to fast, medium, or slow. Default is slow. Hold the "TURBO" button on the controller and simultaneously operate the right joystick up or down to adjust the speed.

Figure 4: Turbo Function in action.

Macro Setting for Back Buttons (ML/MR)

Supported buttons for programming: A/B/X/Y/L/R/ZL/ZR/L3/R3/D-PAD

• Entering Programming Mode: Press and hold the M button for 2 seconds. The left and right 3D rings will slowly flash (requires LED effects to be enabled), indicating the controller has entered programming mode.
• Mapping a Button: Press the button you want to program (map). The left and right 3D rings will flash quickly.
• Programming Confirmation: Press ML or MR. The left and right 3D rings will change from fast flashing to steady, indicating successful button programming (mapping).
• Note: You can program up to 16 buttons. If no button is pressed for more than 1 minute, the controller will automatically exit programming mode.
• Clearing Settings: After holding the M button for 2 seconds and seeing the left and right 3D rings flash slowly, press ML or MR to clear the programmed back button settings.

Figure 5: Programmable Macro Function on the back of the controller.

Light Adjustment (RGB Lighting)

• Light Key + R3: Switch between 3 modes (steady, breathing/running horse, rainbow).
• Light Key + L3:
  • In steady mode: Switch colors.
  • In breathing/running horse mode: No effect.
  • In rainbow mode: Pause rainbow effect.
• + and Turbo Combo Key: Press both simultaneously for 3 seconds; the motor vibrates briefly, resetting the lights to default settings.
• Press and hold the lighting button for 10 seconds to turn off the 3D joystick ring lighting. Press and hold the lighting button again for 10 seconds to reactivate the joystick ring lighting.

Figure 6: Hall Effect Joystick with customizable RGB lighting.

Vibration Adjustment

• After connecting the controller, hold the vibration button on the back of the controller while moving the left 3D joystick up or down to increase or decrease motor vibration intensity. The controller will provide 3 seconds of vibration feedback after adjustment. Four intensity levels are available: 100%, 70%, 30%, and 0%, with 70% set as default.
• Press and hold the vibration switch for 10 seconds to disable the vibration function of both motors. Press and hold the vibration switch again for 10 seconds to re-enable the vibration function of both motors.

6. Maintenance

Charging

Connect the adapter using a USB data cable. The charging indicator will remain orange while charging. Once fully charged, the orange charging indicator will turn off.

Low Battery

When the battery is low, the light of the current channel will flash quickly as a reminder to charge the handle.

Standby Mode

• When the handle is powered on, short press the "Pairing" button to enter standby mode.
• When the handle is in pairing mode, it will automatically enter standby mode if pairing is unsuccessful after 60 seconds.
• When the handle is connected to the console, it will automatically enter standby mode after 15 minutes of inactivity.

7. Troubleshooting

• Controller Malfunction/Reset: If the controller malfunctions, you can reset it by pressing and holding the "HOME" button for 10 seconds.
• Joystick Drift: When a joystick drift problem occurs, the problem can often be solved by reconnecting the joystick. Ensure you do not touch the joystick when powering on and connecting to prevent calibration issues.
• Connection Issues: Refer to the "Connection Methods for Various Devices" section (Section 4) to ensure correct pairing procedures for your specific platform. For wired Switch connection, verify "Pro Handle Wired Connection" is enabled in Switch settings.
• Low Battery Indication: If the channel light flashes quickly, the battery is low. Connect the controller to a power source using the USB-C cable to charge it.
• Controller Enters Standby: If the controller enters standby unexpectedly, ensure it's not inactive for 15 minutes or that pairing attempts are completed within 60 seconds. Short press the pairing button to manually enter/exit standby.

Figure 7: Preventing joystick drift by not touching during power-on/connection.

8. User Tips

• Eliminate Drift: The Hall Effect Joysticks are designed to eliminate drift, providing lasting precision. If you experience any issues, try reconnecting the controller.
• Customize Your Play: Utilize the programmable macros on the ML/MR buttons to assign complex combos for one-click execution, giving you an edge in games.
• Rapid Fire Advantage: Experiment with the Turbo mode's three speed settings (5/12/25 presses/sec) to find the optimal rapid-fire rate for different game scenarios.
• Immersive Feedback: Adjust the 6-axis gyro and 4 levels of vibration feedback to enhance your gaming immersion and precision in motion-controlled games.
• Quick Start: Use the one-tap Wake-Up feature by pressing the Home button to instantly wake your Nintendo Switch from sleep mode.

9. Warranty and Support

Contact Information

For any inquiries or support, please contact us:

• Tel: 0755-21010839
• Email: service@echtpower.com
• Web: www.echtpower.com
• Manufacturer: Shenzhen Mike Morgen Technology Co., Ltd
• Address: Room 302, 3rd Floor, Building 5, Zone C, Jinxiu Huacheng Science and Technology Park, No. 36 Xiangjiaotang Second Road, Xiangjiaotang Community, Bantian Street, Longgang District, Shenzhen
• Model: ES01
• FCC ID: 2A88F-ES01

Declaration of Conformity

Model: ES01

Declaration of Conformity (CE): The product conforms to EC standards for radio interference. Shenzhen Mike Morgen Technology Co., Ltd. announces that ES01 radio equipment conforms to the Directive EN IEC 62368-1:2020+A11:2020; EN 50663:2017, EN 62479:2010; ETSI EN 301 489-1 V2.2.3(2019-11); ETSI EN 301 489-17 V3.2.4(2020-09); ETSI EN 300 328 V2.2.2(2019-07). The full text of the EU Declaration of Compliance can be found on: www.echtpower.com

Declaration of Conformity (UKCA): The product conforms to UK standards for radio interference. Shenzhen Mike Morgen Technology Co., Ltd. announces that ES01 radio equipment conforms to the Directive EN IEC 62368-1:2020; BS EN 50663:2017, BS EN 62479:2020; ETSI EN 301 489-1 V2.2.3(2019-11); ETSI EN 301 489-17 V3.2.4(2020-09); ETSI EN 300 328 V2.2.2(2019-07). The full text of the UKCA Declaration of Compliance can be found on: www.echtpower.com

FCC Statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Warning: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Precautions

• ⚠ Do not expose to liquid
• ⛔ Do not disassemble it
• ↷ Avoid dropping it
• ⛆ Avoid extremely high or low temperature