Flipsky 5045 Motor 120KV 720W

Contents

Flipsky Waterproof Brushless DC 5045 Motor User Manual

Model: 5045 Motor 120KV 720W

Brand: Flipsky

1. Product Overview

The Flipsky Waterproof Brushless DC 5045 Motor is a high-performance, durable motor designed for various applications requiring reliable operation in challenging environments, including underwater and outdoor robotics. Its waterproof design (IP58) makes it suitable for ROVs, underwater robots, thrusters, and other submersible applications, as well as electric propulsion systems for surfboards, paddleboards, and skateboards.

Image showing various applicable scenarios for the Flipsky 5045 motor, including forklifts, AGV carts, small unmanned boats, automated equipment, surfboards, electric paddleboards, electric skateboards, outdoor robots, and hydrofoils.
Figure 1: Applicable scenarios for the 5045 Motor.

2. Specifications

ParameterValue
Voltage Range6-16S
KV (RPM/V)130KV
Rated Power500W
Maximum Power720W
Rated Current10.5A
Maximum Current15A
Coil Resistance (R/Ω)0.34
Coil Inductance (L/mH)0.43
Protection GradeIP58
Shaft SpecificationsΦ5mm
Number of Slots & Poles12N/14P
Lead Wire/AWG14 AWG
Length of Lead Wire500mm
Connector4mm Banana Head
Maximum Operating Temperature120°C
Max Torque28.5Nm
Top view of the Flipsky 5045 motor showing '5045/120KV' and 'flipsky.net' branding.
Figure 2: Top view of the 5045 Motor.
Bottom view of the Flipsky 5045 motor showing the bearing and mounting holes.
Figure 3: Bottom view of the 5045 Motor.

3. Setup and Installation

This section provides guidance for the proper setup and installation of your Flipsky 5045 Motor. Ensure all connections are secure and components are compatible before operation.

3.1 Motor Variants

The 5045 motor is available in different shaft configurations:

  • Short Shaft: Suitable for applications where a compact profile is desired.
  • Long Shaft: Provides extended reach for propellers or other attachments.
  • Long Shaft with Propeller: A pre-assembled option for immediate use in propulsion systems.
Flipsky 5045 motor with long shaft and pre-attached wires with 4mm banana connectors.
Figure 4: 5045 Motor with Long Shaft.
Flipsky 5045 motor with short shaft and pre-attached wires with 4mm banana connectors.
Figure 5: 5045 Motor with Short Shaft.
Flipsky 5045 motor with a propeller attached to the long shaft, showing the complete thruster assembly.
Figure 6: 5045 Motor with Propeller (Long Shaft Variant).

3.2 Mechanical Mounting

Mount the motor securely to your application's frame or housing using appropriate fasteners. Refer to the technical diagrams for precise mounting hole dimensions and shaft details.

Technical drawing for the short shaft motor, detailing dimensions, mounting holes, shaft diameter (Φ5mm), and 4mm banana bullet connectors.
Figure 7: Short Shaft Motor Technical Diagram.
Technical drawing for the long shaft motor, detailing dimensions, mounting holes, shaft diameter (Φ5mm), and 4mm banana bullet connectors with 500mm 14 AWG silicone wire.
Figure 8: Long Shaft Motor Technical Diagram.

3.3 Electrical Connections

  1. Connect the three 14 AWG silicone wires from the motor to your Electronic Speed Controller (ESC) using the 4mm banana head connectors. Ensure correct phase matching (A-A, B-B, C-C) for proper rotation. If the motor spins in the wrong direction, swap any two of the three motor wires.
  2. Ensure all connections are secure and insulated, especially for underwater applications.
  3. Connect the ESC to your power source (6-16S battery) and control system according to the ESC manufacturer's instructions.

Note: Always refer to your ESC manual for specific wiring and configuration details. Incorrect wiring can damage the motor or ESC.

4. Operating Instructions

The Flipsky 5045 Motor is designed for robust operation. Follow these guidelines for optimal performance:

  • Power Supply: Operate the motor within the specified voltage range of 6-16S.
  • Temperature Monitoring: While the motor has a maximum operating temperature of 120°C, it is advisable to monitor its temperature during initial runs and heavy loads to prevent overheating.
  • Waterproof Rating: The motor has an IP58 protection grade, meaning it is protected from dust ingress and can withstand continuous immersion in water up to a specified depth (typically 1 meter or more, consult specific IP58 standards for exact depth). Ensure all external connections are also waterproofed for submersible use.
  • Propeller/Load: Ensure any attached propeller or load is balanced and securely fastened to the Φ5mm shaft. An unbalanced load can cause vibrations and reduce motor lifespan.

5. Maintenance

Regular maintenance helps ensure the longevity and reliable performance of your motor:

  • Visual Inspection: Periodically inspect the motor for any signs of physical damage, corrosion, or loose connections.
  • Shaft and Bearings: Check the motor shaft for any bends or damage. While the motor is sealed, ensure smooth rotation of the shaft.
  • Wire Integrity: Inspect the 14 AWG silicone wires and 4mm banana head connectors for fraying, cuts, or corrosion. Replace damaged wires immediately.
  • Cleaning: For underwater applications, rinse the motor with fresh water after use in saltwater to prevent salt buildup and corrosion. Ensure it is thoroughly dried before storage.
  • Storage: Store the motor in a dry, cool environment away from direct sunlight and corrosive substances.

6. Troubleshooting

If you encounter issues with your Flipsky 5045 Motor, consider the following troubleshooting steps:

ProblemPossible CauseSolution
Motor does not spin or spins irregularly.
  • Loose or incorrect wiring to ESC.
  • ESC not properly configured or faulty.
  • Insufficient power from battery.
  • Motor damage.
  • Check all 4mm banana connections and ensure they are secure. Verify phase matching.
  • Consult your ESC manual for setup and calibration. Test with a known good ESC.
  • Ensure battery is fully charged and capable of supplying required current.
  • Inspect motor for physical damage or seized bearings.
Motor overheats quickly.
  • Excessive load on the motor.
  • Incorrect propeller size/pitch.
  • Insufficient cooling.
  • Motor or ESC timing issues.
  • Reduce load or use a larger motor.
  • Use a smaller propeller or one with less pitch.
  • Ensure adequate water flow for cooling in submersible applications.
  • Adjust ESC timing settings (refer to ESC manual).
Reduced power or efficiency.
  • Battery degradation.
  • Propeller damage or fouling.
  • Partial motor damage.
  • Test with a new or fully charged battery.
  • Inspect and clean propeller. Replace if damaged.
  • Contact support if motor performance is significantly degraded without external cause.

For further assistance, please contact Flipsky support.

7. Warranty and Support

Flipsky provides a warranty for its products under specific conditions:

7.1 Warranty Period

  • Consumable Electronic Products (e.g., VESC, Motor, Battery): 2 months from the date of shipment, provided the shipment date is verifiable by logistics record.
  • Non-Electronic Products: 2 months from the date of shipment, provided the shipment date is verifiable by logistics record.

The warranty period is calculated from the 7th day after shipment (the shipping date is checked by logistic record).

7.2 Warranty Exclusions

The warranty does not cover:

  • Mechanical damage to electronic components or PCB.
  • PCB board repair involving soldering iron traces (excluding soldering the cable bullet connectors).
  • Water damage or external impact damage beyond the product's specified protection grade (IP58).
  • Products not purchased directly from Flipsky.net.
  • Damage resulting from uncertain connections or incorrect VESC/Motor settings.
  • Wear and tear caused by normal use.

Note: Flipsky's liability is limited to the actual purchase price of the product. Products are 100% tested before shipment.

7.3 After-Sale Process

To initiate an after-sale process, contact Flipsky service at flipsky_service@outlook.com. You may be required to return the product for inspection. Shipping costs for returns are typically borne by the customer, while replacement shipping costs are covered by Flipsky if the product is deemed defective.

Repair services for out-of-warranty products may be provided for a reasonable charge, excluding shipping costs.

8. User Tips

  • ESC Compatibility: Always ensure your Electronic Speed Controller (ESC) is compatible with brushless DC motors and can handle the voltage (6-16S) and current (up to 15A continuous) requirements of this motor. Pay close attention to the ESC's current rating.
  • Secure Connections: For any application, especially those involving vibration or water, double-check that all electrical connections (motor to ESC, ESC to battery) are robust, properly insulated, and waterproofed if necessary.
  • Propeller Selection: Experiment with different propeller sizes and pitches to find the optimal balance between thrust, efficiency, and motor temperature for your specific application.
  • Initial Testing: Before full deployment, perform initial tests in a controlled environment to verify motor direction, temperature, and overall system stability.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.