ECHTPower Wireless Pro Controller User Manual

Introduction

Thank you for purchasing the ECHTPower Wireless Pro Controller. This manual provides detailed instructions on how to set up, operate, and maintain your controller, ensuring an optimal gaming experience across multiple platforms including Nintendo Switch, iOS, Android, and PC. Please read this manual thoroughly before use and keep it for future reference.

Package Contents

Please check the package to ensure all items are present:

• Wireless Controller x 1
• Charging Cable (USB-C) x 1
• Instruction Manual x 1

Specifications

Product Diagram

Familiarize yourself with the layout of your ECHTPower Wireless Pro Controller:

Figure 1: Front view of the ECHTPower Wireless Pro Controller.

Figure 2: Back view of the controller with MR/ML buttons and switches.

Button Layout:

• Front: Home, Turbo (+), Screen Capture (-), A/B/X/Y, Left Joystick/L3, Right Joystick/R3, D-pad, M Button.
• Top: R Button, L Button, Charging Indicator, Pairing Button, Type-C Charging Port, Channel LED.
• Bottom: ZR Button, ZL Button, ML Button, MR Button, Vibration Switch, Light Switch Key.

Setup and Connection

Initial Activation & Power Management:

• Initial Use: Before first use, the controller must be charged using the provided USB-C data cable to activate it. Connect the controller to a power source (e.g., Switch dock or AC adapter).
• Power On: Press the Home button lightly.
• Power Off: Press the pairing button lightly.
• One-Tap Wake-Up: When connected to a Nintendo Switch, press the Home button to instantly wake your Switch from sleep mode.

Connection Methods for Various Devices:

The controller supports both wired and wireless connections across multiple platforms.

Note for Nintendo Switch Wired Connection: Ensure that the "Settings → Handle and Sensor → Pro Handle Wired Connection" function is enabled on your Switch console.

Operating Instructions

Turbo Rapid Fire Function:

Supported buttons: A, B, X, Y, L, R, ZL, ZR, D-pad.

• Manual Turbo: Hold the 'T' button, then press and hold one of the supported buttons for 3 seconds. The controller will vibrate once to activate manual rapid fire.
• Automatic Turbo: Hold the 'T' button, then press and hold the button already configured for manual rapid fire again for 3 seconds. The controller will vibrate once to activate automatic rapid fire.
• Disable Turbo: Hold the 'T' button, then press and hold the button configured for automatic rapid fire again for 3 seconds. The controller will vibrate once to disable the rapid fire function for that button.
• Clear All Turbo Settings: Press and hold the 'T' button for 3 seconds to clear rapid fire settings for all buttons.
• Speed Adjustment: Rapid fire speed can be adjusted to fast, medium, or slow. The default is slow. Hold the 'T' button on the controller and simultaneously move the right joystick up or down to adjust the speed.

Macro Setting for Back Buttons (ML/MR):

Supported buttons for mapping: A, B, X, Y, L, R, ZL, ZR, L3, R3, D-PAD.

• Entering Programming Mode: Press and hold the 'M' button for 2 seconds. The left and right 3D rings will slowly flash (requires LED effects to be enabled), indicating the controller has entered programming mode.
• Mapping a Button: While in programming mode, press the button you want to program (map). The left and right 3D rings will flash quickly.
• Programming Confirmation: Press either the 'ML' or 'MR' button. The left and right 3D rings will change from fast flashing to steady, indicating successful button programming.
• Note: You can program up to 16 buttons. If no button is pressed for more than 1 minute, the controller will automatically exit programming mode.
• Clearing Settings: After holding the 'M' button for 2 seconds and seeing the left and right 3D rings flash slowly, press 'ML' or 'MR' to clear the programmed back button settings.

Light Adjustment (RGB Lighting):

Customize the 9-color RGB lighting effects on your controller.

• Switching Modes: Press 'Light Key' + 'R3' to cycle between 3 modes: Steady, Breathing/Running Horse, and Rainbow.
• Color Adjustment: Press 'Light Key' + 'L3'.
  • In Steady mode: Switch colors.
  • In Breathing/Running Horse mode: No effect.
  • In Rainbow mode: Pause the rainbow effect.
• Reset Lights to Default: Press the '+' and 'Turbo' buttons simultaneously for 3 seconds. The motor will vibrate briefly, and the lights will reset to their default settings.
• Turn On/Off Joystick Ring Lighting: Press and hold the lighting button for 10 seconds to turn off the 3D joystick ring lighting. Press and hold it again for 10 seconds to reactivate.

Vibration Adjustment:

The controller features dual motors with adjustable vibration intensity.

• Adjust Intensity: After connecting the controller, hold the vibration button on the back of the controller while moving the left 3D joystick up or down to increase or decrease motor vibration intensity. The controller will provide 3 seconds of vibration feedback after adjustment.
• Intensity Levels: Four intensity levels are available: 100% (Strong), 70% (Medium - default), 30% (Weak), and 0% (Off).
• Disable/Enable Vibration: Press and hold the vibration switch for 10 seconds to disable the vibration function of both motors. Press and hold the vibration switch again for 10 seconds to re-enable the vibration function.

Battery Management

Charging:

• Connect the controller to an adapter using the provided USB-C data cable.
• The orange charging indicator will remain lit while charging.
• Once fully charged, the orange charging indicator will turn off.
• A full charge takes approximately 2.5 hours and provides 10-16 hours of usage time.

Low Battery Indicator:

When the battery is low, the light of the current channel will flash quickly as a reminder to charge the controller.

Standby Mode:

• Manual Standby: When the controller is powered on, short press the "Pairing" button to enter standby mode.
• Automatic Standby (Pairing): If the controller is in pairing mode and fails to pair after 60 seconds, it will automatically enter standby mode.
• Automatic Standby (Inactivity): When the controller is connected to a console but remains inactive for 15 minutes, it will automatically enter standby mode.

Maintenance

• Keep the controller clean by wiping it with a soft, dry cloth.
• Avoid exposing the controller to liquids, excessive dust, or extreme temperatures.
• Store the controller in a cool, dry place when not in use.
• Do not attempt to disassemble or repair the controller yourself, as this may void the warranty and cause damage.

Troubleshooting

• Controller Malfunction/Unresponsive: If the controller malfunctions or becomes unresponsive, you can reset it by pressing and holding the "HOME" button for 10 seconds.
• Connection Issues: Ensure the controller is fully charged. For wireless connections, verify the correct pairing combination for your device (refer to the "Connection Methods" table). For wired Switch connections, confirm "Pro Handle Wired Connection" is enabled in Switch settings.
• Drift Issues: The controller features Hall Effect Joysticks designed to prevent drift. If you experience any unusual input, try resetting the controller.
• Interference (FCC): If the equipment causes harmful interference to radio or television reception, try the following: reorient or relocate the receiving antenna, increase the separation between the equipment and receiver, connect the equipment into an outlet on a circuit different from that to which the receiver is connected, or consult the dealer/technician.

User Tips

• Experiment with the different RGB lighting modes and colors to personalize your gaming setup.
• Utilize the programmable back buttons (ML/MR) for frequently used in-game actions or complex combos to gain a competitive edge.
• Adjust the vibration intensity to your preference for a more immersive or less distracting gaming experience.
• Remember to enable "Pro Handle Wired Connection" in your Nintendo Switch settings for optimal wired performance.

Safety Precautions

• Do not expose the controller to liquid.
• Do not disassemble the controller.
• Avoid dropping the controller.
• Avoid exposing the controller to extremely high or low temperatures.
• Dispose of the product and rechargeable battery responsibly at an appropriate collection point for recycling, in accordance with local regulations. Do not dispose of with household waste.

Warranty & Support

This product comes with a 12-month warranty for worry-free gaming.

For technical support, warranty claims, or any inquiries, please contact ECHTPower customer service:

• Email: service@echtpower.com
• Website: www.echtpower.com
• Telephone: 0755-21010839

Manufacturer: Shenzhen Mike Morgen Technology Co., Ltd

Address: Room 302, 3rd Floor, Building 5, Zone C, Jinxiu Huacheng Science and Technology Park, No. 36 Xiangjiaotang Second Road, Xiangjiaotang Community, Bantian Street, Longgang District, Shenzhen.

A detailed user manual in PDF format is also available for download on the manufacturer's website.

Regulatory Information

Declaration of Conformity (CE):

Model: ES01

The product conforms to EC standards for radio interference. Shenzhen Mike Morgen Technology Co., Ltd. declares that the ES01 radio equipment conforms to Directive EN IEC 62368-1:2020+A11:2020; EN 50663:2017, EN 62479:2010; ETSI EN 301 489-1 V2.2.3(2019-11); ETSI EN 301 489-17 V3.2.4(2020-09); ETSI EN 300 328 V2.2.2(2019-07).

The full text of the EU Declaration of Compliance can be found on: www.echtpower.com

UKCA Declaration:

The product conforms to UK standards for radio interference. Shenzhen Mike Morgen Technology Co., Ltd. declares that the ES01 radio equipment conforms to Directive EN IEC 62368-1:2020; BS EN 50663:2017, BS EN 62479:2020; ETSI EN 301 489-1 V2.2.3(2019-11); ETSI EN 301 489-17 V3.2.4(2020-09); ETSI EN 300 328 V2.2.2(2019-07).

The full text of the UKCA Declaration of Compliance can be found on: www.echtpower.com

FCC Statement:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

FCC Warning: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

FCC ID: 2A88F-ES01