SoBuy FSR172-W

Contents

SoBuy FSR172-W Shoe Bench Instruction Manual

Model: FSR172-W | Brand: SoBuy

SoBuy FSR172-W Shoe Bench in a hallway setting

Front view of the SoBuy FSR172-W Shoe Bench with seating cushions.

1. Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your SoBuy FSR172-W Shoe Bench. Please read these instructions carefully before assembly and use to ensure safe and correct operation. Keep this manual for future reference.

2. Safety Information

  • Ensure all parts are present and undamaged before assembly.
  • Assemble the product on a soft, clean surface to prevent scratches.
  • Do not overtighten screws during assembly to avoid damaging the material.
  • Keep small parts away from children during assembly.
  • Do not exceed the maximum load capacity of 181 kg.
  • Regularly check all connections for tightness and re-tighten if necessary.

3. Package Contents

Before starting assembly, verify that all components and hardware are present. Refer to the detailed diagrams in the official PDF manual for visual identification of each part.

3.1. Tools Required

  • Wrench
  • Screwdriver
  • Hex Key (4mm)

3.2. Parts List (UNIT: MM)

Components Overview
Part IDDescriptionQuantity
1-12Wooden Panels (various sizes)1-2 each
13-23Wooden Panels (various sizes)1-2 each

3.3. Hardware List (UNIT: MM)

Hardware Overview
Part IDDescriptionQuantity
AM6*35 Bolt16
BΦ15*10 Cam Lock Nut16
CL, CR, DL, DRConnecting Pieces (300mm)4 each
EΦ6*30 Dowel26
FM5*40 Screw6
GM4*35 Screw5
HM4*30 Screw4
JM4*12 Screw24
KM3*12 Screw12
LM6*40 Screw4
MM6*30 Screw12
NM6*12 Screw2
PΦ26*10 Hinge4
Q13.4*14.7*9.6 Corner Bracket6
RM3*16 Screw1

4. Assembly Instructions

For detailed step-by-step diagrams, please refer to the official user manual PDF: Download PDF Manual.

4.1. Bolt Installation Guide

Before starting, understand the correct way to install bolts and connecting pieces:

  • A1: Insert the bolt (A) into the pre-drilled hole.
  • A2: Place the connecting piece (e.g., CL, CR, DL, DR) over the bolt.
  • A3: Ensure the connecting piece direction is correct as illustrated in the manual (usually with the arrow pointing towards the bolt head).
  • A4: Insert the bolt into the connecting piece and tighten securely.

4.2. Step-by-Step Assembly Overview

  1. Attach bolts (A) to panel 5.
  2. Connect panel 7 to panel 6 using dowels (E) and cam lock nuts (B).
  3. Attach panel 8 to panel 5 using dowels (E).
  4. Connect panel 4 to panel 5 using bolts (A).
  5. Join panels 7 and 8 to panel 4 using dowels (E) and cam lock nuts (B).
  6. Attach panel 2 to the assembled structure using bolts (A).
  7. Secure panel 2 to the main structure using dowels (E) and cam lock nuts (B).
  8. Install panel 8 and 2 to form the main compartment.
  9. Attach connecting pieces (CL, K) to panel 6 and panel 3.
  10. Connect panel 3 to the main structure using bolts (A).
  11. Secure panel 6 to panel 3 using connecting pieces (CR, K).
  12. Attach panel 6 to the main structure using cam lock nuts (B) and dowels (E).
  13. Install panel 9 to panel 3 using dowels (E).
  14. Secure panel 9 to panel 3 using screws (G).
  15. Assemble the smaller side unit by joining panels 5, 3, and 9 with dowels (E) and cam lock nuts (B).
  16. Connect panels 10 and 11 to form the back of the main unit.
  17. Assemble the frame for the main storage compartment using panels 1, 4, 5, 6, and screws (F).
  18. Assemble the frame for the smaller storage compartment using panels 21, 23, and screws (L).
  19. Attach the back panel (1) to the main frame using screws (M).
  20. Secure the back panel (1) to the smaller frame using screws (N).
  21. Attach the top panels (10, 11) to the assembled base.
  22. Assemble the drawer unit using panels 17, 18, 15, and screws (H).
  23. Attach panel 15 to panel 17 using screws (H).
  24. Assemble the drawer box using panel 18.
  25. Attach bolts (A) to panel 14.
  26. Connect panel 14 to the drawer unit using cam lock nuts (B).
  27. Attach connecting pieces (DR, DL, K) to panel 15 and the drawer unit.
  28. Insert the assembled drawer into its slot.
  29. Attach hinges (P) to panel 13 using screws (J).
  30. Install panel 13 as a door to the main compartment using hinges (P) and screws (J). Repeat for the second door.
  31. Place the top panels (19, 20) onto the assembled shoe bench.

5. Operation and Usage

The SoBuy FSR172-W Shoe Bench is designed for convenient shoe storage and comfortable seating in your hallway or children's room.

5.1. Storage

  • The main shoe cabinet features two compartments behind hinged doors, providing ample space for various shoe sizes. It can accommodate approximately 6-8 pairs of adult shoes.
  • The smaller side unit includes a drawer for additional storage of smaller items like keys, shoe care products, or accessories.
SoBuy FSR172-W Shoe Bench with doors open, showing shoes stored inside

The shoe bench with its doors open, revealing stored footwear.

5.2. Seating

  • The shoe bench features two seating surfaces: a large, high seat and a smaller, shorter seat. These are suitable for both adults and children to sit comfortably while putting on or taking off shoes.
  • The maximum load capacity for seating is 181 kg.
Close-up of the grey fabric seat cushion on the SoBuy FSR172-W Shoe Bench

Close-up view of the comfortable grey fabric seat cushion.

6. Maintenance

To ensure the longevity and appearance of your shoe bench, follow these maintenance guidelines:

  • Cleaning: Wipe surfaces with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, as these can damage the finish.
  • Spills: Clean up spills immediately to prevent staining or water damage.
  • Hardware: Periodically check all screws and fasteners to ensure they are tight. Re-tighten if necessary to maintain stability.
  • Protection: The shoe cabinets are equipped with square felt feet to help prevent scratches on your floor. Ensure these are intact.
Close-up of the white leg and felt foot of the SoBuy FSR172-W Shoe Bench

Detail of the shoe bench's leg with a protective felt foot.

7. Troubleshooting

If you encounter any issues with your shoe bench, consider the following:

  • Instability/Wobbling: Check that all assembly screws and bolts are securely tightened. Ensure the bench is placed on a flat, even surface.
  • Doors not closing properly: Verify that the hinges are correctly installed and adjusted. Check for any obstructions inside the compartments.
  • Drawer sticking: Ensure the drawer slides are properly aligned and free of debris.

For persistent issues, please refer to the detailed assembly steps in the PDF manual or contact customer support.

8. Specifications

Product Specifications
FeatureDetail
ModelFSR172-W
BrandSoBuy
MaterialMDF (E1), Metal
Product Dimensions (BHT)Approx. 100 x 42 x 35 cm
WeightApprox. 19 kg
Load CapacityUp to 181 kg
Shoe Capacity6-8 pairs of adult shoes
Package DimensionsApprox. 110 x 43.5 x 13.5 cm
SoBuy FSR172-W Shoe Bench with detailed dimensions labeled

Detailed dimensions of the shoe bench, including overall length, height, and depth of compartments.

9. Warranty and Support

For warranty information or if you require further assistance, please contact the seller or manufacturer directly. Keep your proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.