1. Introduction
The JONSBO ZC-360 is a high-performance 3-in-1 case cooling fan designed for PC enthusiasts. It features three 120mm fans integrated into a single unit, equipped with 3.38-inch continuous screens for real-time system monitoring and customizable ARGB lighting effects. This manual provides detailed instructions for installation, operation, and maintenance to ensure optimal performance and longevity of your cooling fan.
2. Safety Information
- Ensure your computer system is powered off and unplugged from the wall outlet before installation or maintenance.
- Handle the fan unit carefully to avoid damage to the blades or electronic components.
- Do not expose the device to moisture or extreme temperatures.
- Keep out of reach of children.
- Only use the provided cables and connectors.
3. Package Contents
Please check the package contents upon unboxing. If any items are missing or damaged, contact your retailer.
- JONSBO ZC-360 3-in-1 Case Cooling Fan Unit
- Mounting Screws
- Connection Cables (4PIN PWM, 5V-3PIN ARGB, LCD USB)
- User Manual (this document)
4. Specifications
| Feature | Specification |
|---|---|
| Model Number | ZC-360 |
| Brand Name | Jonsbo |
| Fan Size | 363.80mm (L) * 130mm (W) * 28mm (H) (Individual fan: 120 MM) |
| Fan Speed | 700 - 2400 RPM ±10% |
| Noise Level | 21.3 - 37.3 dBA |
| Air Volume | 21.46 - 62.40 CFM |
| Wind Pressure | 0.49 - 2.46 mmH2O |
| Bearing Type | Two Ball Bearing (Bidirectional Ball Bearing) |
| Fan Life Expectancy | ≥70000h (Room Temp: 25°C) |
| Rated Voltage (Fan) | 12V |
| Rated Current (Fan) | 0.51A |
| Power Consumption (Fan) | 6.12W |
| Rated Voltage (LED) | 5V |
| Rated Current (LED) | 0.48A |
| Power Consumption (LED) | 2.4W |
| Power Interface | 4PIN (PWM), 5V-3PIN ARGB, LCD USB |
| Blade Quantity | 9 |
| Screen Type | 3.38" * 3 IPS ICD Screen |
| Screen Resolution | 640 * 180 DPI |
| Screen Brightness | 350 NITS (Peak) |
| Used For | PC Case Cooling |
| Warranty | 5 years |
Note: Specifications may vary slightly due to environmental factors or product revisions.
5. Setup and Installation
The JONSBO ZC-360 fan unit is designed for easy installation with magnetic suction. It features a one-line connection for simplified cable management.
5.1 Physical Installation
- Prepare your PC Case: Ensure your PC is powered off and unplugged. Open the side panel of your computer case.
- Identify Mounting Location: Determine where you want to install the fan unit (e.g., top, bottom, or side of the case). The unit is designed to fit standard 3x120mm fan mounts.
- Magnetic Suction Installation: The ZC-360 features strong magnetic cores for easy attachment. Simply align the fan unit with the desired metal surface in your case; it should snap into place securely. For additional security or non-magnetic surfaces, use the provided mounting screws to fasten the unit.
- Airflow Direction: Observe the arrows on the fan frame to ensure correct airflow direction (inlet surface for air intake, exhaust surface for air expulsion).


5.2 Cable Connections
The ZC-360 uses a combined cable for power, ARGB, and LCD screen data.
- 4PIN PWM Connection: Connect the 4-pin PWM cable from the fan unit to an available 4-pin fan header on your motherboard. This allows for fan speed control.
- 5V-3PIN ARGB Connection: Connect the 5V-3PIN ARGB cable to a compatible 5V-3PIN ARGB header on your motherboard or an ARGB controller. This enables synchronized lighting effects. Do NOT connect to a 12V RGB header, as this will damage the LEDs.
- LCD USB Connection: Connect the LCD USB cable to an available internal USB 2.0 header on your motherboard. This provides power and data for the integrated screens.

6. Operating Instructions
6.1 Fan Operation
Once connected to a 4-pin PWM header, the fan speed will be automatically controlled by your motherboard based on system temperature, or you can manually adjust it via your motherboard's BIOS/UEFI settings or dedicated fan control software.
6.2 ARGB Lighting Effects
The ZC-360 supports Addressable RGB (ARGB) lighting. To control the lighting effects:
- Motherboard Synchronization: If connected to a compatible 5V-3PIN ARGB header, you can synchronize the fan's lighting with your motherboard's RGB software (e.g., ASUS Aura Sync, Gigabyte RGB Fusion 2.0, MSI Mystic Light Sync, ASRock Polychrome Sync).
- ARGB Controller: If using an external ARGB controller, refer to the controller's manual for lighting effect adjustments.
The lighting effects are highly customizable, allowing you to choose from a wide range of colors, patterns, and dynamic modes.
6.3 Screen Display Control Software
The ZC-360 features three 3.38-inch continuous screens that can display various system information and custom content. To utilize these screens, you need to install the dedicated control software.
- Software Installation: Download the latest version of the JONSBO ZC-360 control software from the official Jonsbo website. Follow the on-screen instructions to install it on your computer.
- Software Features: The software allows you to:
- Display CPU, GPU, RAM, FAN, and HDD operation status.
- Import and apply preset theme patterns.
- Customize display patterns and parameters for each of the three screens independently.
- Upload and play videos or display images (GIF/JPG/MP4) on the screens.


7. Maintenance
Regular maintenance helps ensure the longevity and optimal performance of your JONSBO ZC-360 fan unit.
- Dust Cleaning: Periodically clean the fan blades and screens to prevent dust buildup. Use a can of compressed air or a soft, dry cloth. Ensure the fans are not spinning when cleaning with compressed air.
- Cable Check: Occasionally check all cable connections (PWM, ARGB, USB) to ensure they are securely seated.
- Software Updates: Keep the screen display control software updated to the latest version for new features and bug fixes.
8. Troubleshooting
If you encounter issues with your JONSBO ZC-360, refer to the following troubleshooting guide:
- Fans Not Spinning:
- Check if the 4PIN PWM cable is securely connected to the motherboard fan header.
- Ensure the motherboard fan header is enabled in BIOS/UEFI settings.
- Verify that your power supply is providing adequate power.
- ARGB Lights Not Working:
- Confirm the 5V-3PIN ARGB cable is correctly connected to a compatible 5V-3PIN ARGB header (not 12V RGB).
- Check your motherboard's RGB software or ARGB controller settings.
- Ensure the ARGB header on your motherboard is enabled.
- Screens Not Displaying/Working:
- Verify the LCD USB cable is securely connected to an internal USB 2.0 header on your motherboard.
- Ensure the JONSBO ZC-360 control software is installed and running.
- Check for any error messages in the software or Windows Device Manager.
- Try restarting your computer.
- Abnormal Noise:
- Ensure no cables or obstructions are hitting the fan blades.
- Clean any dust buildup on the fan blades.
- If the noise persists and is excessive, it may indicate a bearing issue. Contact support.
9. User Tips
- For optimal cooling performance, ensure proper airflow within your PC case. Consider the fan's intake and exhaust directions relative to other components.
- Experiment with different screen display configurations to find what best suits your monitoring needs and aesthetic preferences.
- Regularly check for software updates for the screen control utility to unlock new features or improve stability.
10. Warranty and Support
The JONSBO ZC-360 3-in-1 Case Cooling Fan comes with a 5-year warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use.
The warranty does not cover:
- Damage caused by improper installation, misuse, abuse, or neglect.
- Damage caused by unauthorized modifications or repairs.
- Damage due to natural disasters or accidents.
- Normal wear and tear.
For warranty claims or technical support, please contact your retailer or Jonsbo customer service with your proof of purchase.