Important Safety Instructions
Before using this product, please read these safety instructions and the user manual thoroughly. Ensure these instructions are included if the product is passed to a third party.
Protecting Your Health and Safety
- Do not use this product if it is visibly damaged.
- Avoid prolonged listening at high volumes.
- Do not use while driving or engaging in activities that require full attention.
- Keep the product and its packaging/accessories away from children and pets to prevent accidental ingestion.
- Keep away from pacemakers and other medical devices susceptible to magnetic fields.
Protecting Your Product
- Store the product at room temperature, keep it dry, and avoid prolonged exposure to high/low temperatures or humid environments.
- Use only accessories provided or approved by FIIL.
- Control the input signal level to prevent overload damage.
- Clean the product only with a dry, soft cloth.
Battery Warning
This product uses a lithium polymer battery. Improper use may result in fire or burns. Charge the product only with a standard charger (voltage 5V, current ~500mA) or a computer USB port.
Regulatory Compliance and Disclaimer
- This product is designed for portable devices and high-fidelity audio systems.
- Any use not specified in this manual is considered misuse.
- FIIL is not responsible for any losses caused by non-standard, incorrect use, or other human errors.
'FIIL' is a registered trademark of Jiangxi FIIL Technology Co., Ltd.
Package Contents
The FIIL Atom package includes the following items:
- Earbuds x 1 pair
- Quick Start Guide x 1
- USB Type-C Charging Cable x 1

Product Overview
Familiarize yourself with the main components of your FIIL Atom earbuds.

- Arc Bridge: The flexible part that clips onto your ear.
- Touch Area: For controlling playback, calls, and other functions.
- Indicator Light: Provides status feedback (e.g., pairing, charging).
Setup and Wearing
First Use and Charging
Before initial use, it is recommended to charge the earbuds for at least 10 minutes.

Removing and Activating Earbuds
When you take out the left earbud, a white light will illuminate. When you take out the right earbud, a blue light will illuminate. The earbuds can be placed back into the charging case without specific left/right orientation.
Before use, remove the protective film from the charging pins of the earbuds, then place them back into the charging case to activate them.

Bluetooth Pairing
To pair your FIIL Atom earbuds with a device:
- Ensure the earbuds are charged and activated.
- Open the charging case. The earbuds will enter pairing mode.
- On your device (e.g., smartphone, tablet), go to Bluetooth settings.
- Search for and select "FIIL Atom" from the list of available devices.
- Once connected, you will hear an audio prompt.

FIIL+ App Features
Notice: Effective May 2026, support for the FIIL App will be temporarily suspended due to software upgrades.
The FIIL+ App enhances your earbud experience, offering additional functionalities. You can download the FIIL+ App by scanning the QR codes below or visiting the official FIIL website.

After installing the FIIL+ App, register and connect your earbuds to access the following features:
- Headphone Status Information: View earbud battery levels and current mode status.
- Preset Custom EQ Sound Effects: Access 3 official EQs and 12 preset EQs. Further customize with a 5-band custom EQ.
- Bluetooth Seamless Connection: Supports multipoint connection, allowing simultaneous connection to two Bluetooth devices.
- More Settings: Adjust low-latency mode and playback controls.
- Custom Button Operations: Customize single-click, double-click, triple-click, and long-press actions.
Custom Button Operations (Example)
| Action | Default Function |
|---|---|
| Single Click | Volume Up / Volume Down |
| Double Click | Answer/Hang up call, Play/Pause music |
| Long Press (2 seconds) | Reject call, No operation |
| Triple Click | Volume Down |
Note: Default settings are for simple mode (double-click only). Functions can be customized via the FIIL+ App.
Specifications
| Item | Specification |
|---|---|
| Model | FIIL Atom |
| Wearing Type | Ear-Clip |
| Color | White/Grey |
| Weight | Earbud: approx. 5.3g/each, Charging case: approx. 31.6g |
| Size (Charging Case) | approx. 62mm x 47.5mm x 26mm |
| Bluetooth Version | Bluetooth 5.4 |
| Bluetooth Codec | AAC, SBC |
| BT Protocol Version | HFP, HSP, A2DP, AVRCP |
| Low-Latency Mode | ON/OFF |
| Bluetooth Multipoint Connectivity | Support (connects to 2 devices simultaneously) |
| Transmission Distance | > 10 meters |
| Playback Time | Earbuds: approx. 8 hours (music), 5 hours (calls) Charging case: provides 3.5 extra charges |
| Speaker Dimension | φ11mm custom dynamic unit |
| Mic Frequency | 20Hz~10kHz |
| Speaker Magnet | Dual-channel high-density rubidium magnet |
| Mic Sensitivity | -38dBV@94dBSPL, 1kHz input |
| Speaker Sensitivity | 108+3dB @1KHz @1mW |
| Dual-Mic Call Noise Reduction ENC | Single microphone AI ENC, reduces 26dB (approx. 95%) |
| Speaker Frequency | 20Hz~20kHz |
| Waterproof | IPX5 (Earbuds) |
| Touch Control | Support |
| EQ Settings | 3 official EQs + 12 Pre-set EQs, 5-Band Customizable EQs |
| Certification | SRRC/GB4943.1-2022, ROHS, REACH, Bluetooth 5.4 |
| Operating Environment | Operating temperature: 0℃~50℃; Storage temperature: -30℃~70℃ |
| Voice Prompts | Chinese |
| Accessories | Charging case*1, USB-C Cable*1 |
Troubleshooting
| Problem Description | Solution |
|---|---|
| No sound in one or both earbuds, or poor sound quality | Power off and on, listen to voice prompts, reconnect to your phone, and try different audio sources. If connecting to a computer, due to the complexity of computer systems and drivers, you may need to manually select the audio device protocol or try playing with other devices. |
| Cannot charge, power on | Try changing the charging cable or charger. Connect the earbuds to power and check if the indicator light is on. If the charging indicator is normal, try pressing the earbud to power on, then pair and use relevant functions. |
| Cannot switch songs, cannot adjust volume | Rule out third-party player or phone compatibility issues. Try using the default player or another phone. |
| Cannot find Bluetooth earbuds, cannot connect to phone, or unstable Bluetooth connection | Try moving your phone closer to the earbuds, or confirm that the pairing method is correct. Clear the Bluetooth list on your phone and try pairing again. Also, check if there is radio frequency interference in the environment. |
| Other issues | Please consult FIIL customer service via their official WeChat account or website for further assistance. |
Environmental Protection Information
This table indicates the presence of hazardous substances in the product components.
| Component Name | Lead (Pb) | Mercury (Hg) | Cadmium (Cd) | Hexavalent Chromium (Cr(VI)) | Polybrominated Biphenyls (PBB) | Polybrominated Diphenyl Ethers (PBDE) |
|---|---|---|---|---|---|---|
| Printed Circuit Boards & Components | O | O | O | O | O | O |
| Main Body & Accessories (incl. packaging) | O | O | O | O | O | O |
| Cables & Connectors | X | O | O | O | O | O |
O: Indicates that the hazardous substance in all homogeneous materials of this component is below the limit requirements specified in SJ/T 11363-2006.
X: Indicates that the hazardous substance in at least one homogeneous material of this component exceeds the limit requirements specified in SJ/T 11363-2006. Components marked with "X" cannot be replaced due to technical reasons at present, but will be gradually improved in the future.
The product is marked with the "Environmental Protection Use Period" (EFUP) symbol in China. The number in the circle represents the normal service life of the product. This table is compiled according to SJ/T 11364-2006.

This product complies with GB4943.1-2022 "Safety Requirements for Audio/Video, Information Technology and Communication Technology Equipment Part 1". The QC PASS indicates that the product meets quality inspection standards and is approved for factory release.
Warranty and Support
Dear FIIL Earbud User,
For operating instructions or common issues, please refer to the troubleshooting section, contact the 400 hotline, or follow the WeChat official account "FIIL Earbuds".
Warranty Policy
- 7-Day Return: (Provided outer packaging is intact and does not affect secondary sales)
- 15-Day Worry-Free Exchange: (Product determined to have non-human caused performance failure)
- 1-Year Warranty: (Main unit determined to have non-human caused performance failure)
For detailed warranty policies, please visit the official FIIL Chinese website: http://www.fiil.cn/cn/service.php
Return/Exchange Steps (Simplified)
- For return/exchange requests, please contact the "FIIL Earbuds" WeChat official account online customer service or the 400 hotline (4008507997) to obtain a service code.
- After obtaining the service code, submit your request online via the "After-Sales Service" section of the "FIIL Service" WeChat official account.
- If returning, please send back all accessories and the original packaging box.
Reference: A user manual PDF is available for download here.
User Tips
- The FIIL+ app, initially reported as unusable, has been updated and is now fully functional, allowing access to all additional features.
- Users report a very good, solid sound quality, especially considering the AAC codec.
- The earbuds offer long battery life, providing extended listening time.
- Overall, many users find these to be surprisingly good headphones.