1. Introduction
The AULA V9/V9+ series gaming mice are designed for esports enthusiasts and gamers, offering versatile connectivity options (Wired, 2.4G Wireless, Bluetooth), high-performance optical sensors (PAW3395 or PAW3950), and a lightweight, ergonomic design. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance.

2. Package Contents
- AULA V9/V9+ Gaming Mouse (specific model varies)
- USB-C to USB-A Cable (for wired connection and charging)
- 2.4G Wireless Receiver (USB-A dongle)
- User Manual (this document)
- *Note: An 8K receiver may need to be purchased separately for certain models to achieve 8000Hz wireless polling rate. Standard 1K receiver is included with some models.
3. Setup
3.1 Charging the Mouse
Before first use, it is recommended to fully charge the mouse. Connect the provided USB-C cable to the mouse's charging port and the other end to a USB-A port on your computer or a USB power adapter. The RGB lighting may indicate charging status.
3.2 Connection Modes
The AULA V9/V9+ mouse supports three connection modes: Wired, 2.4G Wireless, and Bluetooth. A switch on the bottom of the mouse allows you to select the desired mode.

3.2.1 Wired Connection
Connect the USB-C cable directly from the mouse to your computer's USB-A port. The mouse will automatically switch to wired mode and begin charging.
3.2.2 2.4G Wireless Connection
- Insert the 2.4G wireless receiver into an available USB-A port on your computer.
- Switch the mode selector on the bottom of the mouse to "2.4G" or the corresponding wireless icon.
- The mouse should connect automatically. If not, press the pairing button (if available, usually near the mode switch) on the mouse and ensure the receiver is properly inserted.
3.2.3 Bluetooth Connection
- Switch the mode selector on the bottom of the mouse to "BT" or the Bluetooth icon.
- On your computer, navigate to Bluetooth settings and enable Bluetooth.
- Search for new devices. The mouse should appear as "AULA V9" or similar.
- Select the mouse to pair.
3.3 Driver and Software Installation
For full customization of DPI, polling rate, button assignments, and RGB lighting, it is recommended to download and install the official AULA software from the manufacturer's website. Refer to the product page or packaging for the software download link.
4. Operating Instructions
4.1 DPI Adjustment
The mouse features a dedicated DPI button (often located behind the scroll wheel) to cycle through preset DPI levels. The PAW3395 sensor supports up to 26,000 DPI, while the PAW3950 sensor supports up to 30,000 DPI (software accelerated up to 42,000 DPI). Use the software for precise DPI customization.

4.2 Polling Rate (Rate of Return)
The mouse supports a high polling rate for responsive operation. Standard models offer 1000Hz, while some V9/V9+ wired, standard, and PRO versions support 8000Hz wireless feedback rate. An 8K receiver (sold separately for some models) is required for 8000Hz wireless performance.

4.3 Button Functions
The mouse features standard left/right click buttons, a scroll wheel (TTC Gold Wheel), and side buttons. All buttons are programmable via the AULA software. The primary key jog uses Omron mechanical micro switches with a lifespan of 0.1 billion cycles.

4.4 RGB Lighting
The mouse is equipped with an RGB surround atmosphere light strip. You can customize lighting effects through the AULA software, choosing from modes like Steady On, Breathe, Flickering, Spectrum, Wave, or turning it completely off.

5. Maintenance
5.1 Cleaning
The mouse features a nano ice-sensing coating, which is anti-fouling and easy to clean. Use a soft, dry cloth to wipe the surface. For stubborn dirt, a slightly damp cloth with mild soap can be used, ensuring no liquid enters the mouse. Avoid harsh chemicals or abrasive materials.

5.2 Battery Care
The mouse is equipped with either a 300mAh or 600mAh battery. To prolong battery life:
- Charge Regularly: Charge the mouse regularly, but avoid leaving it plugged in indefinitely after a full charge.
- Avoid Extremes: Avoid exposing the mouse to extreme temperatures (hot or cold).
- Storage: If storing for an extended period, charge the battery to about 50% before storage.

6. Troubleshooting
6.1 Mouse Not Responding
- Check Battery: Ensure the mouse is charged. Connect it via USB-C cable.
- Check Connection Mode: Verify the mode switch on the bottom of the mouse is set correctly (Wired, 2.4G, or BT).
- 2.4G Wireless: Ensure the receiver is securely plugged into a USB port. Try a different USB port. Re-pair if necessary (refer to Section 3.2.2).
- Bluetooth: Ensure Bluetooth is enabled on your computer and the mouse is paired (refer to Section 3.2.3). Try unpairing and re-pairing.
- Wired: Ensure the USB-C cable is securely connected to both the mouse and the computer. Try a different USB port or cable.
6.2 DPI or RGB Not Changing
- Software: Ensure the AULA software is installed and running. Changes made in the software may override on-board settings.
- Firmware: Check the official AULA website for any available firmware updates for your mouse model.
6.3 Lag or Disconnections in Wireless Mode
- Interference: Move the receiver closer to the mouse. Avoid placing the receiver near other wireless devices (Wi-Fi routers, cordless phones) that might cause interference.
- USB Port: Try plugging the 2.4G receiver into a USB 2.0 port instead of USB 3.0, as some USB 3.0 ports can cause interference.
- Battery Level: Low battery can affect wireless performance. Ensure the mouse is sufficiently charged.
7. Specifications
The AULA V9/V9+ series offers various models with distinct specifications. Refer to the table below for details.

| Feature | V9 / V9+ | V9 Pro / V9 Pro+ | V9 Ultra / V9 Ultra+ |
|---|---|---|---|
| Sensor | PAW3395 | PAW3395 | PAW3950 |
| Main Control Chip | Realtek High-Performance Gaming Flagship Main Control Chip | ||
| Return Rate (Hz) | Wired 8K / Wireless 1K (Standard config. 1K receiver) | Wired 8K / Wireless 8K (With 8K receiver) | Wired 8K / Wireless 8K (With 8K receiver) |
| Primary Key Jog | OMRON mechanical micro-motion 0.1 billion times | OMRON optical micro switch 100 million cycles | OMRON optical micro switch 100 million cycles |
| Side Button | Yuanhu micro switch 0.1 billion times | ||
| Battery | 300mAh | 600mAh | 600mAh |
| Scroll Wheel | TTC Gold Wheel | ||
| Connection Method | Wired / 2.4G / Bluetooth | ||
| DPI | Up to 26,000 | Up to 42,000 | Up to 42,000 |
| Acceleration (G) | 50g | ||
| Maximum Speed (IPS) | 650 | 750 | 750 |
| LOD (Lifting Distance MM) | 1.00mm / 2.00mm | 0.7mm / 1.00mm / 2.00mm | 0.7mm / 1.00mm / 2.00mm |
| Surface Treatment | Nano ice-sensing coating | ||
| Weight (g) | 55±1g | 58±1g | 63±1g |
| Size (Approx.) | 118.54mm × 60.22mm × 37.68mm | 125.39mm × 63.70mm × 39.85mm | 125.39mm × 63.70mm × 39.85mm |
| Grip Posture | Recommended for small and medium hands | Recommended for big hands | |
8. User Tips
- Customization: Take advantage of the AULA software to fine-tune DPI settings, button macros, and RGB lighting to match your gaming style and preferences.
- Polling Rate: For competitive gaming, utilize the highest available polling rate (8000Hz if supported by your model and receiver) for the most responsive experience. Ensure your system can handle the increased data rate.
- Grip Style: The V9/V9+ series offers different sizes. Choose the model that best fits your hand size and grip posture (palm, claw, fingertip) for maximum comfort and control during long gaming sessions.
- Surface: Use the mouse on a high-quality mouse pad for optimal sensor tracking and glide.
- Battery Management: If you experience wireless lag, check the battery level first. A low battery can sometimes affect wireless signal stability.
9. Warranty & Support
For warranty information, technical support, or service inquiries, please contact your retailer or the official AULA customer support. Keep your proof of purchase for any warranty claims.