1. Introduction
Thank you for choosing the Artiss SOL King Single Metal Bed Frame. This manual provides essential information for the safe assembly, proper use, and maintenance of your new bed frame. Please read all instructions carefully before beginning assembly and retain this manual for future reference.
Figure 1: Assembled Artiss SOL King Single Metal Bed Frame
2. Safety Information
- Always assemble the bed frame on a soft, clean surface to prevent damage to the product or your floor.
- Ensure all components are present and undamaged before assembly. Do not use if any parts are missing or broken.
- Tighten all screws and bolts securely during assembly. Periodically check and re-tighten fasteners to ensure stability.
- Do not allow children to climb on or play with the bed frame during assembly or use.
- Distribute weight evenly on the bed frame. Do not exceed the maximum weight capacity of 150kg.
- Keep hands and fingers clear of moving parts during assembly to avoid pinching.
3. Package Contents
Your Artiss SOL King Single Metal Bed Frame package includes the following components:
- All necessary metal frame components (headboard, footboard, side rails, center support beams, metal tube slats).
- Hardware pack (screws, bolts, washers, Allen key).
- Assembly Manual (this document).
Please verify that all parts are present before proceeding with assembly. If any parts are missing or damaged, please contact customer support.
4. Setup and Assembly
Assembly of the Artiss SOL King Single Metal Bed Frame is required. It is recommended that two adults perform the assembly. Please follow these general steps:
- Unpack all components and lay them out on a clean, soft surface (e.g., a carpet or blanket) to prevent scratches.
- Identify the headboard and footboard sections.
- Attach the side rails to the headboard and footboard using the provided hardware. Ensure all connections are secure but do not fully tighten bolts until the frame is fully assembled.
- Install the central support beams, if applicable, connecting them to the headboard, footboard, and/or side rails as per the specific design.
- Place the metal tube slats across the frame. Ensure they are evenly spaced and securely fitted into their designated positions.
- Once all components are in place, fully tighten all screws and bolts. Do not overtighten.
- Carefully lift and move the assembled bed frame to its desired location.
The bed frame is designed for self-contained installation, meaning it does not require attachment to a wall or other furniture for support.
5. Usage
The Artiss SOL King Single Metal Bed Frame is designed to accommodate a standard King-Single-sized mattress (203cm x 107cm). Place your mattress directly onto the metal tube slat base. The evenly spaced slats provide good weight distribution and help keep the mattress in place.
The design of the bed frame allows for storage space underneath, which can be utilized for organizing items in your bedroom.
Figure 2: Key Features of the Artiss SOL Bed Frame
6. Maintenance
- Cleaning: Wipe the metal frame with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, as these can damage the powder-coated finish.
- Inspection: Periodically check all bolts and screws to ensure they remain tight. Re-tighten as necessary to maintain the bed frame's stability and prevent squeaking.
- Ventilation: The metal tube slat base promotes ventilation, helping to keep your mattress fresh and dry.
Figure 3: Durable Metal Slats for Mattress Support
7. Troubleshooting
- Squeaking Noises: If the bed frame makes squeaking noises, check all connections and tighten any loose bolts. Ensure the mattress is properly seated on the slats.
- Instability: If the bed frame feels unstable, verify that all components are correctly assembled and all fasteners are securely tightened. Ensure the bed is on a level surface.
- Damaged Parts: If any part is damaged during assembly or use, cease use immediately and contact customer support for replacement parts.
8. Specifications
| Attribute | Specification |
|---|---|
| Material | Powder-coated steel |
| Slat Type | Metal tube |
| Mattress Size Compatibility | Standard King-Single (203cm x 107cm) |
| Overall Dimensions (L x W x H) | 211cm x 112cm x 88cm |
| Weight Capacity | 150kg |
| Colour | Black |
| Assembly Required | Yes |
| Installation Method | Self-contained |
| Storage | Allows storage underneath the frame |
Figure 4: Artiss SOL King Single Bed Frame Dimensions
9. User Tips
- For easier assembly, lay out all parts and hardware in an organized manner before starting.
- Consider using felt pads under the bed frame legs if placing on hardwood floors to prevent scratches and reduce noise.
- Utilize the under-bed space with storage bins or boxes to maximize room organization.
10. Warranty and Support
This Artiss SOL King Single Metal Bed Frame comes with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects under normal use. It does not cover damage caused by misuse, improper assembly, or normal wear and tear.
For warranty claims, missing parts, or technical support, please contact your retailer or the manufacturer's customer service with your proof of purchase.
