ASAIR AOX3000

Contents

AOX3000 Three-Electrode Lead-Free Oxygen Sensor

Model: AOX3000 | Brand: ASAIR

1. Introduction

The ASAIR AOX3000 is a high-performance, three-electrode lead-free electrochemical oxygen sensor designed for industrial applications. This sensor provides accurate and reliable oxygen concentration measurements, contributing to safety and process control in various environments. This manual provides essential information for the safe and effective use of your AOX3000 sensor.

2. Safety Information

WARNING: CAUTION CONTAINS ACID-NON

This sensor contains a non-acidic electrolyte. While generally safe, improper handling or damage to the sensor may expose internal components. Always handle the sensor with care. In case of leakage, avoid direct contact with skin and eyes. Consult a medical professional if exposure occurs. Dispose of the sensor according to local environmental regulations.

  • Do not attempt to open or disassemble the sensor.
  • Avoid dropping or subjecting the sensor to severe mechanical shock.
  • Ensure proper ventilation when installing or operating the sensor in an enclosed space.
  • Only use the sensor within its specified operating conditions.

3. Package Contents

Upon receiving your AOX3000 sensor, please verify that all components are present and undamaged:

  • 1 x AOX3000 Three-Electrode Lead-Free Oxygen Sensor
  • Protective packaging (e.g., plastic container)
AOX3000 sensor in its protective plastic container

Figure 3.1: AOX3000 Sensor in Protective Packaging

4. Product Overview

The AOX3000 is a compact, cylindrical electrochemical sensor designed for precise oxygen detection. It features a robust housing and three gold-plated electrodes for reliable electrical connection. The top surface includes a porous membrane that allows oxygen to diffuse into the sensor for measurement.

Front view of the AOX3000 oxygen sensor showing model number and part number

Figure 4.1: Front View of AOX3000 Sensor (Part No. 22K0122K28)

Top view of the AOX3000 sensor showing ASAIR brand and porous membrane

Figure 4.2: Top View of AOX3000 Sensor with ASAIR Branding

Bottom view of the AOX3000 sensor showing three gold-plated electrodes

Figure 4.3: Bottom View of AOX3000 Sensor with Electrodes

5. Specifications

FeatureDescription
ModelAOX3000
TypeThree-Electrode Lead-Free Electrochemical Oxygen Sensor
UseGas Sensor
High-Concerned ChemicalNone
OriginMainland China
Package Dimensions (L x W x H)15 cm x 15 cm x 5 cm (approx.)
Package Weight0.2 kg (approx.)

6. Setup

6.1 Handling and Unpacking

Carefully remove the AOX3000 sensor from its protective packaging. Avoid touching the sensing membrane or the electrode pins directly. Inspect the sensor for any visible damage before installation.

6.2 Installation

The AOX3000 sensor is designed for integration into compatible gas detection systems. Ensure the mounting location is free from excessive vibration, extreme temperatures, or direct exposure to liquids unless the system is specifically designed for such conditions. The sensor should be installed in an orientation that allows for optimal gas flow to the sensing membrane.

6.3 Electrical Connection

Connect the three gold-plated electrodes of the AOX3000 sensor to your gas detection system's corresponding terminals. Refer to your system's specific wiring diagram for correct pin assignments (typically working, reference, and counter electrodes). Ensure connections are secure and free from corrosion.

7. Operating Instructions

7.1 Principle of Operation

The AOX3000 operates on an electrochemical principle, generating an electrical current proportional to the partial pressure of oxygen in the ambient air. This current is then converted by the gas detection system into an oxygen concentration reading.

7.2 Initial Power-Up and Stabilization

After installation and connection, power on your gas detection system. Allow the sensor a stabilization period (typically several minutes to an hour, depending on the system and environmental conditions) before taking accurate readings. During this time, the sensor's output may drift as it equilibrates with the environment.

7.3 Calibration

Regular calibration is crucial for maintaining the accuracy of your oxygen sensor. Refer to your gas detection system's manual for specific calibration procedures. Typically, calibration involves exposing the sensor to known concentrations of oxygen (e.g., fresh air for 20.9% O2, or a zero-oxygen gas) and adjusting the system's readings accordingly.

7.4 Data Reading

Oxygen concentration data will be displayed on your gas detection system's interface. Monitor these readings and ensure they are within expected ranges for your application. Set appropriate alarm thresholds on your system if required.

8. Maintenance

8.1 Cleaning

Periodically inspect the sensor's exterior for dust or debris. Gently clean the sensor housing with a soft, dry cloth. Do NOT use abrasive cleaners, solvents, or liquids directly on the sensing membrane or electrode pins, as this can damage the sensor.

8.2 Storage

If the sensor is to be stored for an extended period, ensure it is kept in its original protective packaging in a cool, dry place, away from direct sunlight and corrosive gases. Avoid extreme temperatures and humidity. The protective packaging helps maintain the sensor's integrity and shelf life.

8.3 Replacement

Electrochemical sensors have a finite lifespan, which can vary depending on environmental conditions and exposure levels. Monitor your system's diagnostics for sensor health indicators. Replace the sensor when its performance degrades or when indicated by your system's maintenance schedule.

9. Troubleshooting

This section addresses common issues you might encounter with your AOX3000 sensor. For more detailed troubleshooting, refer to your gas detection system's manual.

ProblemPossible CauseSolution
No oxygen reading or erratic readingsIncorrect wiring, sensor not stabilized, sensor failure, blocked membraneCheck wiring connections. Allow adequate stabilization time. Inspect membrane for obstructions. Replace sensor if necessary.
Inaccurate readingsNeeds calibration, environmental interference, sensor agingPerform calibration. Ensure sensor is in a stable environment. Consider sensor replacement if aging is suspected.
Sensor not detected by systemLoose connection, incorrect sensor type, system faultVerify all electrical connections are secure. Confirm sensor compatibility with your system. Consult system manual for fault diagnosis.

10. User Tips

  • Always ensure the environment where the sensor is installed is representative of the area you wish to monitor for oxygen levels.
  • Keep a log of calibration dates and sensor performance to track its lifespan and ensure consistent accuracy.
  • When replacing the sensor, ensure the new sensor is of the correct model (AOX3000) and from a reputable supplier to guarantee compatibility and performance.

11. Warranty and Support

For warranty information, technical support, or service inquiries, please contact your original point of purchase or the manufacturer directly. Keep your purchase receipt and product serial number (if applicable) handy when contacting support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.