SUPERFIRE R3 Flashlight User Manual

Introduction

Thank you for choosing the SUPERFIRE R3 Super Bright Flashlight. This manual provides essential information for the safe and efficient use of your new flashlight. Please read it thoroughly before operation and retain it for future reference.

Figure 1: SUPERFIRE R3 Flashlight overview, highlighting 36W power, 5000mAh battery, smart cooling, and Type-C charging port.

Specifications

Figure 2: The R3 flashlight's powerful 36W LED wick provides effective lighting up to 350m.

Setup

Initial Charging

1. Before first use, fully charge the flashlight.
2. Connect the provided Type-C charging cable to the flashlight's charging port.
3. Use a 5V/1A charger for optimal charging. Using a different charger may prevent normal charging.
4. During charging, the indicator light will be solid red.
5. Once fully charged, the indicator light will turn solid blue.

Figure 3: The Type-C charging port for convenient power replenishment.

Operation

Power On/Off and Mode Selection

1. Power On: Press the front power button once to activate the low-light mode.
2. Mode Cycling: Continue pressing the power button to cycle through the brightness modes in the following order: Low Light → Medium Light → High Light → Strobe → SOS.
3. Power Off: To turn off the flashlight from any mode, press and hold the power button for 2 seconds.

Figure 4: The R3-P90 offers five brightness adjustment modes: Low Light, Medium Light, High Light, Strobe, and SOS.

Indicator Lights

• Charging Indicator: Solid red when charging, solid blue when fully charged.
• Discharging Indicator: Solid blue during normal operation (discharging).
• Low Battery Warning: The red indicator light flashes when the battery is low and requires charging.

Maintenance

Battery and Lamp Care

• Always use a standard 5V/1A charger for charging.
• Keep the flashlight and battery away from heat and fire sources. Do not attempt to modify the battery.
• Store the battery in a dry environment, out of reach of children.
• Do not install the battery incorrectly (upside down) or store it with metal objects that could cause a short circuit.
• Avoid disassembling the product yourself to prevent short circuits or damage.
• Do not use the flashlight in environments exceeding 45°C.
• Avoid directly shining the light into eyes, as it may cause temporary blindness.
• The flashlight uses a high-power chip, so it is normal for it to generate heat (within 45°C) during operation.
• Prevent overcharging or over-discharging the battery. Follow charging instructions strictly.
• If the battery leaks, immediately wash any contaminated skin or clothing with water. Consult a doctor if the condition is severe.
• Charge the battery as soon as possible when it is exhausted. For idle periods, charge the battery at least once a month to maintain its health.

Figure 5: The built-in 26650 lithium battery (5200mAh) is designed for stable and durable performance with cycle charge, explosion-proof design, and double vent.

Cleaning and Storage

• Wipe the flashlight with a soft, damp cloth. Do not use abrasive cleaners or solvents.
• Ensure the charging port cover is securely closed when not charging to maintain its IP44 waterproof rating.
• Store the flashlight in a cool, dry place when not in use for extended periods.

Figure 6: The R3 flashlight features an IP44 life waterproof rating, designed to withstand rain and wet conditions.

Figure 7: The intelligent "Shark Cooling" system helps dissipate heat during prolonged use.

Troubleshooting

• Flashlight does not turn on:
  • Ensure the battery is sufficiently charged. Check the indicator light.
  • Verify you are using a 5V/1A charger for charging. Incorrect chargers may prevent charging.
  • If the issue persists, please contact SUPERFIRE customer support.
• Flashlight not charging:
  • Confirm the charging cable is securely connected to both the flashlight and the power source.
  • Ensure the power source (e.g., wall adapter) is functional.
  • Use a 5V/1A charger. Other chargers may not be compatible.
  • Check the charging port for any debris or damage.
• Light output is dim or inconsistent:
  • The battery may be low. Recharge the flashlight.
  • Ensure the flashlight head is clean and free of obstructions.

Warranty and Support

For any product inquiries, technical support, or warranty claims, please contact the SUPERFIRE Lighting Official Store where you purchased the product. Please refer to the seller's specific warranty policy for details regarding coverage and duration.

Keep your purchase receipt or order number handy when contacting support.